Prediction of shear deformation and thickness gradients in deep-draw forming of ultra-high molecular weight polyethylene
Source abstract
Abstract
Ultra-high molecular weight polyethylene (UHMWPE) composite armor offers a high level of lightweight protection. In the manufacturing of complex curvature UHMWPE based protective materials, UHMWPE composites are transformed from flat sheet stock to a near net shape complex curvature preform through deep-draw forming. The development of a deep-draw forming process model is critical for predicting UHMWPE sheet deformation during processing and knowing the fiber orientations at each location in the entire final part. This work introduces a robust methodology to model the deep-draw forming process. The model is validated by comparing critical output with experimental results for multiple UHMWPE materials and over a range of part thicknesses. A hemispherical geometry is used to demonstrate the methodology. A homogenization strategy for grouping sheets is presented and validated, which is critical for keeping computational times manageable. The influence of the material in-plane shear response, a critical model input, is investigated. The model developed in this work represents a valuable tool for selecting deep-draw forming parameters and accelerates the evaluation of new and emerging UHMWPE materials for application in manufacturing complex curvature protective armor.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Polymer crystallization and properties · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
U.S. Army Combat Capabilities Development Command (DEVCOM) Army Research Laboratory, APG, MD, USA
DEVCOM Soldier Center, Natick, MA, USA
References (26)
Show source-provided references
1. 10.1115/1.403479110.1115/1.4034791 ↗
2. 10.1007/s12289-016-1327-210.1007/s12289-016-1327-2 ↗
3. Yeager M · 2019
4. 10.1016/j.compositesa.2017.03.01810.1016/j.compositesa.2017.03.018 ↗
5. 10.1016/j.compositesb.2018.04.03010.1016/j.compositesb.2018.04.030 ↗
6. 10.1002/pc.1065510.1002/pc.10655 ↗
7. 10.1016/j.compositesa.2008.02.01610.1016/j.compositesa.2008.02.016 ↗
8. 10.1016/S1359-835X(00)00046-410.1016/S1359-835X(00)00046-4 ↗
9. 10.1016/j.compositesa.2015.08.01710.1016/j.compositesa.2015.08.017 ↗
10. 10.1007/s12289-009-0646-y10.1007/s12289-009-0646-y ↗
11. 10.1016/j.compositesb.2013.03.04510.1016/j.compositesb.2013.03.045 ↗
12. 10.1177/089270570403821910.1177/0892705704038219 ↗
13. 10.1177/002199831876254710.1177/0021998318762547 ↗
14. 10.1016/j.procir.2017.03.22310.1016/j.procir.2017.03.223 ↗
15. 10.12783/asc33/2594410.12783/asc33/25944 ↗
16. 10.1115/1.403115410.1115/1.4031154 ↗
17. 10.1016/j.ijimpeng.2020.10359210.1016/j.ijimpeng.2020.103592 ↗
18. 10.1016/j.daach.2015.03.00210.1016/j.daach.2015.03.002 ↗
19. 10.1186/s12859-017-1934-z10.1186/s12859-017-1934-z ↗
20. Boyd SE · 2018
21. Kloppel T, Knust G, Liebold C, et al. 2014.Implementation and validation of a new anisotropic constitutive model for thermoplastic prepregs in LS-DYNA SAMPE Europe - SEICO 14. In: 35th International Technical Conference and Forum, Paris, France, 2014
22. Cline J · 2019
23. 10.1007/s12289-009-0519-410.1007/s12289-009-0519-4 ↗
24. 10.1007/s12289-016-1294-710.1007/s12289-016-1294-7 ↗
25. 10.1016/j.matdes.2015.12.16610.1016/j.matdes.2015.12.166 ↗
26. 10.1016/j.compscitech.2010.03.00310.1016/j.compscitech.2010.03.003 ↗