CFD-PBM simulation of PET and supercritical CO 2 microcellular foaming
Source abstract
Abstract
By loading Cross model and Oldroyd-B model with User-defined Function (UDF) program, a method to simulate the extrusion flow of viscoelastic non-Newtonian fluid in Fluent software was proposed. In the homogeneous solution of Polyethylene terephthalate (PET) and supercritical CO 2 , the microscopic bubble growth kinetics model was coupled with the Population Balance Module (PBM), analysis effect of shear rate on bubble nucleation and growth, numerically simulated of the nucleation and growth of bubbles in the extrusion die of PET microcellular foam sheet. Through analysis, the bubble size distribution is more uniform under the condition of 60° template convergence angle. The larger the extrusion speed, the wider the uniform distribution range of bubble density at the outlet position. The initial concentration of CO 2 has the greatest impact on the bubble density. Increasing the initial concentration of CO 2 can improve the bubble density, but appropriately reducing the initial concentration of CO 2 can improve the effective distribution range of bubble density of foam sheet.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Foaming and Composites · Injection Molding Process and Properties · Rheology and Fluid Dynamics Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Jiangsu University of Science and Technology, Zhenjiang, China
Funding
Qing Lan Project of the Higher Education Institutions of Jiangsu Province · National Natural Science Foundation of China Youth Science Foundation
References (25)
Show source-provided references
1. 10.1016/j.compositesb.2022.10972510.1016/j.compositesb.2022.109725 ↗
2. Mazzuca P · J Build Eng · 2021 · 42
3. 10.1021/acs.iecr.9b0250110.1021/acs.iecr.9b02501 ↗
4. 10.1177/089270572093914110.1177/0892705720939141 ↗
5. 10.1177/089270571879237510.1177/0892705718792375 ↗
6. 10.1016/j.ijheatmasstransfer.2019.11928510.1016/j.ijheatmasstransfer.2019.119285 ↗
7. 10.1002/app.4580510.1002/app.45805 ↗
8. 10.1016/j.supflu.2012.11.01910.1016/j.supflu.2012.11.019 ↗
9. 10.1016/j.aiepr.2021.03.00210.1016/j.aiepr.2021.03.002 ↗
10. 10.1002/app.4926810.1002/app.49268 ↗
11. 10.1016/j.polymertesting.2016.04.02310.1016/j.polymertesting.2016.04.023 ↗
12. 10.1016/j.polymertesting.2017.08.03910.1016/j.polymertesting.2017.08.039 ↗
13. 10.1016/j.eurpolymj.2017.05.00310.1016/j.eurpolymj.2017.05.003 ↗
14. 10.1016/j.ces.2016.07.04010.1016/j.ces.2016.07.040 ↗
15. Yao S · Polymers-Basel · 2021 · 13
16. Yang JK · Mater Design · 2021 · 203 · 0264
17. 10.1177/0021955X2097429110.1177/0021955X20974291 ↗
18. 10.1016/j.ijheatmasstransfer.2016.09.04310.1016/j.ijheatmasstransfer.2016.09.043 ↗
19. 10.1016/j.ces.2020.11621310.1016/j.ces.2020.116213 ↗
20. 10.1016/j.ces.2018.07.05110.1016/j.ces.2018.07.051 ↗
21. 10.1016/j.supflu.2018.05.01010.1016/j.supflu.2018.05.010 ↗
22. 10.1016/j.vacuum.2018.04.01110.1016/j.vacuum.2018.04.011 ↗
23. 10.1515/polyeng-2013-012610.1515/polyeng-2013-0126 ↗
24. 10.1177/089270571667948010.1177/0892705716679480 ↗
25. 10.1007/BF0036664110.1007/BF00366641 ↗