Density and compressive strength properties of polyester composites reinforced with spiral geometry woven fiber
Source abstract
Abstract
Composites can be produced by combining different materials according to different targets. In this study, woven-type E-glass fiber with a 500 g/m 2 unit-area weight has been used as a reinforcement material. Resin, hardener and accelerator have been used as the matrix materials. The dimensions of compression test sample molds were Ø50 mm × 100 mm. Starting from the center toward the outer diameter, spirally wound fibers have been placed into molds with intervals ranging from 1 mm to 9 mm. Composite materials have been prepared at room temperature by applying vibration to the casting method. Compression tests have been carried out on a total of 27 samples, as 3 samples per dimension. It has been determined that the compressive strengths of the polyester resin composites reinforced with spirally wound fiberglass changes per the spiral geometry. The highest compressive strength and density value have been obtained from the samples prepared with intervals of 1 mm. Compressive strength and density value curves have exhibited similar tendencies.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Natural Fiber Reinforced Composites · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Balıkesir University, Balıkesir, Turkey
Institute of Science and Technology, Division of Mechanical Engineering, Balıkesir University, Balıkesir, Turkey
References (19)
Show source-provided references
1. Kreith F · 2005
2. 10.4324/9780203477151_EFFECT_OF_FILLER_ON_THE_MECHANICAL10.4324/9780203477151_EFFECT_OF_FILLER_ON_THE_MECHANICAL ↗
3. Rao VVLK · ACI Struct J · 1998 · 95 · 153
4. 10.1016/S0958-9465(02)00116-610.1016/S0958-9465(02)00116-6 ↗
5. 10.1023/A:101386822808010.1023/A:1013868228080 ↗
6. Burgueno R · ACI Struct J · 2004 · 101 · 228
7. 10.1016/j.mseb.2006.02.01010.1016/j.mseb.2006.02.010 ↗
8. 10.1016/j.matdes.2005.03.01110.1016/j.matdes.2005.03.011 ↗
9. 10.1177/073168440404012710.1177/0731684404040127 ↗
10. 10.1016/0010-4361(72)90023-710.1016/0010-4361(72)90023-7 ↗
11. 10.1016/S0266-3538(97)00077-810.1016/S0266-3538(97)00077-8 ↗
12. 10.1063/1.293099510.1063/1.2930995 ↗
13. 10.1080/0360255090309434010.1080/03602550903094340 ↗
14. Ateş E · J Eng Nat Sci · 2010 · 28 · 287
15. DIN 16911, Plastic moulding materials: Polyester resin moulding materials- types- requirements- testing. Germany: The German Institute for Standardization, 1978.
16. DIN 16945, Types of plastic moulding materials: Properties of standard test specimens made of polyester resin compression moulding materials. Germany: The German Institute for Standardization, 1972.
17. DIN 51290-3, testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes: Testing of separately manufactured specimens. Germany: The German Institute for Standardization, 1991.
18. ISO 4012, Concrete-determination of compressive strength of test specimens. Switzerland: International Organization for Standardization, 1978.
19. Aran A. Fiber-reinforced composite materials. İstanbul: İTÜ Library, 1990, pp. 420.