journal article·2025-03Open access

Investigating the low velocity impact response of additively manufactured tri-material composite structure with application on helmet

Ammar M Al-Areqi, Subbarayan Sivasankaran, Bandar A Aloyaydi, Fahad A Al-Mufadi

Abstract

Additively manufactured composite structures can be utilized in the production of engineering materials with enhanced mechanical properties. In this work, mono-, bi-, and tri-material structures (MMS, BMS, and TMS, respectively) were fabricated using additively manufactured PLA (poly-lactic acid) lattice frames embedded with Polyurethane (PU) foam and milled glass fibers (MGFs). TMS samples were reinforced with MGFs at 1.25, 2.5, 3.75, and 5.0 vol%, indicated as TMS-1, TMS-2, TMS-3, and TMS-4, respectively. The mechanical response of these composite structures was tested by applying a low-velocity impact load. The effects of MGF content and variations in applied impact energy, and variation in microstructure on the composite samples were investigated. Results revealed an enhanced mechanical response of TMS samples compared to MMS and BMS. Additionally, with increasing applied impact energy, the TMS samples showed an improved corresponding response, with a peak absorbed energy of 96.03% of the applied 60 J energy. Furthermore, to study the applicability of the composite structures in real-life applications, helmet prototypes made of MMS, BMS, and TMS were designed and tested under the applied low-velocity load, showing an improved response of TMS helmet samples compared to the other composite structures.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Cellular and Composite Structures · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Swansea University

Qassim University

References (69)

Show source-provided references
1. 10.1016/j.cobme.2020.10025510.1016/j.cobme.2020.100255 ↗
2. 10.1108/RPJ-01-2021-000910.1108/RPJ-01-2021-0009 ↗
3. 10.1016/j.procir.2019.03.00410.1016/j.procir.2019.03.004 ↗
4. Mehrpouya M, Vosooghnia A, Dehghanghadikolaei A, et al. Chapter 2 - the benefits of additive manufacturing for sustainable design and production. In: Gupta K, Salonitis KBT-SM (eds). Handbooks in Advanced Manufacturing. Elsevier, 2021, pp. 29–59.
5. Hao L Raymond D Strano G et al. Enhancing the sustainability of additive manufacturing. In: 5th International Conference on Responsive Manufacturing - Green Manufacturing (ICRM 2010) 2010 pp. 390–395.10.1049/cp.2010.0462 ↗
6. 10.1007/s00170-013-5151-210.1007/s00170-013-5151-2 ↗
7. 10.1115/1.403471410.1115/1.4034714 ↗
8. Zeng K. Layer by layer validation of geometrical accuracy in Additive Manufacturing processes. In: 24th Int SFF Symp - An Addit Manuf Conf SFF 2013 no. 1 pp. 76–87 2013.
9. 10.1016/j.procir.2014.03.17910.1016/j.procir.2014.03.179 ↗
10. 10.1007/s00170-015-7973-610.1007/s00170-015-7973-6 ↗
11. 10.1016/j.phpro.2015.11.05010.1016/j.phpro.2015.11.050 ↗
12. 10.1016/j.compstruct.2022.11626810.1016/j.compstruct.2022.116268 ↗
13. 10.1016/j.prostr.2021.03.02110.1016/j.prostr.2021.03.021 ↗
14. Rossi P. Development of new cement composite materials for construction. Proc Inst Mech Eng Part L J Mater Des Appl 2005; 219(1): 67–74.
15. 10.1533/9780845699994.1.6910.1533/9780845699994.1.69 ↗
16. 10.1016/S0958-9465(00)00072-X10.1016/S0958-9465(00)00072-X ↗
17. 10.1088/1757-899X/872/1/01206410.1088/1757-899X/872/1/012064 ↗
18. 10.1016/B978-0-12-820338-5.00008-410.1016/B978-0-12-820338-5.00008-4 ↗
19. Petersson H Motte D Bjärnemo R. Carbon fiber composite materials in modern day automotive production lines. 2013.10.1115/IMECE2013-62272 ↗
20. 10.1016/j.wear.2007.09.00610.1016/j.wear.2007.09.006 ↗
21. 10.1016/j.matlet.2019.05.11910.1016/j.matlet.2019.05.119 ↗
22. 10.1016/j.matpr.2020.01.56710.1016/j.matpr.2020.01.567 ↗
23. 10.3390/ma1307168410.3390/ma13071684 ↗
24. 10.1177/089270571559835910.1177/0892705715598359 ↗
25. 10.1016/S0266-3538(98)00185-710.1016/S0266-3538(98)00185-7 ↗
26. 10.3390/ijms1012511510.3390/ijms10125115 ↗
27. 10.1002/app.2090110.1002/app.20901 ↗
28. 10.1016/j.ijimpeng.2011.11.00910.1016/j.ijimpeng.2011.11.009 ↗
29. 10.1002/pc.2266310.1002/pc.22663 ↗
30. 10.2514/3.373210.2514/3.3732 ↗
31. 10.1006/jcis.2002.833210.1006/jcis.2002.8332 ↗
32. Mandell JF. Chapter 7 - fatigue behavior of short fiber composite materials. In: Reifsnider KLBT-CMS (ed). Fatigue of Composite Materials. Elsevier, 1991, vol 4, pp. 231–337.
33. 10.1098/rsta.2013.021210.1098/rsta.2013.0212 ↗
34. 10.1016/j.matdes.2003.09.02210.1016/j.matdes.2003.09.022 ↗
35. 10.1016/j.addma.2017.06.00510.1016/j.addma.2017.06.005 ↗
36. 10.1115/1.290430210.1115/1.2904302 ↗
37. 10.1016/j.mser.2020.10059610.1016/j.mser.2020.100596 ↗
38. 10.1016/j.compositesb.2021.10890310.1016/j.compositesb.2021.108903 ↗
39. 10.1088/1742-6596/1386/1/01200810.1088/1742-6596/1386/1/012008 ↗
40. 10.1177/089270570301600400610.1177/0892705703016004006 ↗
41. 10.3390/fib806003610.3390/fib8060036 ↗
42. 10.3390/polym1415308010.3390/polym14153080 ↗
43. 10.3390/polym1516343610.3390/polym15163436 ↗
44. Mustafa A, Aloyaydi B, Subbarayan S, et al. Mechanical properties enhancement in composite material structures of poly lactic acid/epoxy/milled glass fibers prepared by fused filament fabrication and solution casting, pp. 1–20, 2021.
45. Chen K, Yu L, Cui Y, et al. Optimization of printing parameters of 3D-printed continuous glass fiber reinforced polylactic acid composites. 2021, p. 107717.
46. 10.3390/ma1324565410.3390/ma13245654 ↗
47. 10.3390/polym1521420910.3390/polym15214209 ↗
48. 10.3390/jmmp705017810.3390/jmmp7050178 ↗
49. 10.1098/rsta.2005.167810.1098/rsta.2005.1678 ↗
50. 10.1016/j.compscitech.2006.03.00910.1016/j.compscitech.2006.03.009 ↗
51. 10.1002/app.2652510.1002/app.26525 ↗
52. 10.3390/polym1205104810.3390/polym12051048 ↗
53. 10.1016/j.jnoncrysol.2017.01.03710.1016/j.jnoncrysol.2017.01.037 ↗
54. 10.1081/PPT-10010002210.1081/PPT-100100022 ↗
55. 10.1016/j.compscitech.2013.08.01310.1016/j.compscitech.2013.08.013 ↗
56. Kumar M Kaur R. Glass fiber reinforced rigid polyurethane foam: synthesis and characterization 2017; 17: 517–521.10.1515/epoly-2017-0072 ↗
57. Wang JH. Compressive properties of chopped glass fiber reinforced rigid polyurethane foam. Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Mater Sci Eng 2001; 17(3): 150.
58. Hebda M, McIlroy C, Whiteside B, et al. A method for predicting geometric characteristics of polymer deposition during fused-filament-fabrication. Addit Manuf 2019; 27: 99–108.
59. Tanikella NG, Wittbrodt B, Pearce JM. Tensile strength of commercial polymer materials for fused filament fabrication 3D printing. Addit Manuf 2017; 15: 40–47.
60. 10.1016/j.compscitech.2014.10.00910.1016/j.compscitech.2014.10.009 ↗
61. 10.1063/1.496886210.1063/1.4968862 ↗
62. 10.1007/s00170-020-05522-410.1007/s00170-020-05522-4 ↗
63. 10.1002/pc.2406910.1002/pc.24069 ↗
64. 10.1016/S1359-6454(01)00221-X10.1016/S1359-6454(01)00221-X ↗
65. Nath P, Olson JD, Mahadevan S, et al. Optimization of fused filament fabrication process parameters under uncertainty to maximize part geometry accuracy. Addit Manuf 2020; 35: 101331.
66. 10.1016/j.addma.2021.10195110.1016/j.addma.2021.101951 ↗
67. Mustafa A, Aloyaydi B, Sivasankaran S, et al. Shore hardness characterization of FDM printed PLA/Epoxy/MGFs composite material structure. In: Recent Advances in Manufacturing Processes and Systems, 2021.
68. 10.1016/j.mtcomm.2024.10926410.1016/j.mtcomm.2024.109264 ↗
69. Mustafa Al-Areqi A Aloyaydi B Sivasankaran S et al. Development of 3D printed biodegradable poly-lactic acid/polyurethane foams/milled glass fibers of sustainable composites with application on helmet. 2023 pp. 1–18.10.1007/s12221-023-00189-6 ↗