An experimental validation study of a numerical modeling approach to predicting post-consolidation dimensions of thermoplastic composites
Source abstract
Abstract
Consolidation is an important step in the processing of thermoplastic unidirectional (UD) tapes, as it creates a bond between individual tapes to form a semi-finished sheet: The tape stack is first heated and then cooled, both while being subjected to pressure. If the material is in a soft or even molten state and its flow unrestricted, this compression can result in squeeze flow, the direction of which is determined by the fibers of the tapes. Extensive squeeze flow not only results in significant changes in part geometry to the point where it may fail to meet design and application specifications but can also lead to severe distortion and residual stresses. To address this, we developed a model that, given the process parameters and fiber orientation, predicts the effects of squeeze flow. Based on experimental data on UD polycarbonate tapes with 44% carbon fibers by volume consolidated at various process settings, this paper presents the validation of the model for industrial application. We found that at low heating temperatures, where the matrix viscosity is too high and prevents the material from flowing, the simulation results deviated markedly from the experimental data. With these temperatures excluded, however, the overall deviation of the model was 8.7% for thickness change and 5.3% for area change.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Mechanical Behavior of Composites · Composite Material Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Process Digitalization, Competence Center Chase GmbH, Linz, Austria
Institute for Polymer Injection Moulding and Process Automation, Johannes Kepler University Linz, Linz, Austria
Funding
COMET - Competence Centers for Excellent Technologies
References (26)
Show source-provided references
1. IMARC. Thermoplastic composites market: global industry trends share size growth opportunity and forecast 2023-2028. https://www.imarcgroup.com/thermoplastic-composites-market
2. Gardiner G. Thermoplastic composites gain leading edge on the a380. High Perform Compos 2006; 14: 50–55.
3. Slange T. Rapid manufacturing of tailored thermoplastic composites by automated lay-up and stamp forming - a study on the consolidation mechanisms. Twente: University of Twente, 2019.
4. Slange T Warnet L Grouve W et al. Influence of preconsolidation on consolidation quality after stamp forming of c/peek composites. In: Proceedings of the 19th International ESAFORM Conference on Material Forming Nantes France 27-29 April 2016.10.1063/1.4963578 ↗
5. 10.1177/00219983920260160310.1177/002199839202601603 ↗
6. 10.3390/polym1509218210.3390/polym15092182 ↗
7. 10.3390/polym1421478510.3390/polym14214785 ↗
8. 10.1016/0010-4361(89)90677-010.1016/0010-4361(89)90677-0 ↗
9. 10.1177/0892705723121445810.1177/08927057231214458 ↗
10. 10.1002/pc.75012040610.1002/pc.750120406 ↗
11. 10.1016/0010-4361(89)90679-410.1016/0010-4361(89)90679-4 ↗
12. 10.1007/BF0005843410.1007/BF00058434 ↗
13. 10.1122/1.55045910.1122/1.550459 ↗
14. 10.1016/0377-0257(96)01440-110.1016/0377-0257(96)01440-1 ↗
15. 10.1122/1.55083310.1122/1.550833 ↗
16. 10.1016/S0377-0257(97)00049-910.1016/S0377-0257(97)00049-9 ↗
17. 10.1016/S0093-6413(97)00038-410.1016/S0093-6413(97)00038-4 ↗
18. Kobler E. Modeling the consolidation process of thermoplastic UD tapes. doctoralthesis. Linz: Johannes Kepler Universität, 2023.
19. Weller H. A new approach to vof-based interface capturing methods for incompressible and compressible flow. Technical Report Report TR/HGW 4. OpenCFD Ltd., 2008.
20. Lee D, Jeong M, Choi J, et al. Composite materials. Seoul, Korea: Hongrung Publishing Company, 2007.
21. 10.1007/978-1-4613-1893-4_14310.1007/978-1-4613-1893-4_143 ↗
22. 10.1177/002199831347631810.1177/0021998313476318 ↗
23. 10.1177/00219983920260160210.1177/002199839202601602 ↗
24. 10.3390/polym1523450010.3390/polym15234500 ↗
25. 10.1177/00219980303518810.1177/002199803035188 ↗
26. 10.1177/002199830606016210.1177/0021998306060162 ↗