A Preliminary Investigation of Tensile Properties of Glass-Mat Woven-Fabric-Reinforced Thermoplastic Elastomer Composites
Source abstract
Abstract
Glass-mat woven-fabric-reinforced santoprene composites were fabricated at various temperatures and processing times. The molding temperatures were 190, 200, 210, 220 and 230'C, and the impregnation time was varied between 1 and 30 minutes. Samples were compression molded, and the effects of processing variables such as temperature and time on tensile properties were studied. The degree of impregnation of matrix resin into the reinforcing glass mat was characterized using scanning electron microscopy and tensile properties. In samples fabricated at 190'C, complete impregnation occurred before 10 minutes. The processing temperature had a pronounced effect on the composites; that is, degradation of the matrix resin occurred in samples fabricated at elevated temperatures. Evidence of degradation of the matrix resin processed above 190'C is confirmed by depression of the melting point of the matrix resin and reduction of the tensile strength. The tensile properties of the composites depend on the quantity of voids. Thus, the higher the void content, the lower the tensile properties.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Mechanical Behavior of Composites · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemical Engineering, Himeji Institute of Technology, Shoshadai, Himeji 671-2201, Japan
School of Industrial Technology, Universiti Sains Malaysia, 11800, Penang, Malaysia
References (24)
Show source-provided references
1. 10.1016/0266-3538(95)00115-810.1016/0266-3538(95)00115-8 ↗
2. 10.1002/pc.1028410.1002/pc.10284 ↗
3. 10.1177/08927057970100040210.1177/089270579701000402 ↗
4. 4. Reinhard, D.L. 1992. SPEANTEC Proc., Detroit, MI, May 3-7, pp. 1545-1549.
5. Matsuo, T. · Jap. Soc. Polym. Proc. · 1993 · 5 · 225
6. 10.1177/08927057880010030510.1177/089270578800100305 ↗
7. Hamada, H. · 1993 · 49
8. Matsuo, T. · Adv. Comp. Lett. · 1992 · 1 · 171
9. Majidi, A.P. · SAMPE, J. · 1988 · 24 · 12
10. Leach, D.C. · 1989
11. Shonaike, G.O.10.1201/9780203742921 ↗
12. Rader, C.P. · 1987
13. 1981
14. 10.1016/0263-8223(95)00076-310.1016/0263-8223(95)00076-3 ↗
15. 10.1177/07316844960150010210.1177/073168449601500102 ↗
16. Shonaike, G.O. · Engineering Plastics · 1996 · 9 · 171
17. Shonaike, G.O. · 1997
18. 10.1002/(SICI)1097-4628(19960411)60:2<245::AID-APP12>3.0.CO;2-410.1002/(SICI)1097-4628(19960411)60:2<245::AID-APP12>3.0.CO;2-4 ↗
19. 10.1007/978-94-011-2874-2_710.1007/978-94-011-2874-2_7 ↗
20. Kardos, UL. · 1988 · 41
21. 10.1177/08927057920050010310.1177/089270579200500103 ↗
22. Shonaike, G.O. · 327
23. 10.1520/CTR10214J10.1520/CTR10214J ↗
24. Richardson, M.O.W. · 1977