Polystyrene-Newspaper Composites Part I. Degradation of Polymer during Processing
Source abstract
Abstract
Newsprint reinforced polystyrene was prepared, and the effect of process ing conditions on viscosity (in terms of torque) and molecular weight of polystyrene was studied. Polystyrene was melted in an intensive mixer. The influence of processing tem perature, time, and roller speed was evaluated. Subsequently, newsprint fiber was added to the polymer melt, and the effect of fiber concentration on viscosity and molecular weight of polystyrene was evaluated. A significant decrease in torque and molecular weight was observed when the processing time was longer than 40 minutes. The process ing temperature exhibited discernible effects on torque, specific energy, and degradation of polymer. Torque increased slightly as the roller speed increased from 10 to 20 rpm and then decreased thereafter. However, roller speed appeared to have little effect on polymer properties. Drastic changes in torque, specific energy and polymer degradation were observed with increase of fiber concentration.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Material Properties and Processing · Recycling and Waste Management Techniques · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Wood Chemistry Laboratory Department of Forestry Clemson University Clemson, SC 29634-1003
References (11)
Show source-provided references
1. Piggot, M.R. · 1980
2. 10.1080/0091403850807865110.1080/00914038508078651 ↗
3. 10.1007/BF0064778310.1007/BF00647783 ↗
4. 10.1177/08927057880010020610.1177/089270578800100206 ↗
5. 10.1016/0022-5096(64)90019-510.1016/0022-5096(64)90019-5 ↗
6. 10.1002/app.1980.07025062310.1002/app.1980.070250623 ↗
7. Sapieha, S. · Pulp and Paper Research Institute of Canada · 1987
8. Klason, C. and J. Kubat. 1986. Composite Systems from Natural and Synthetic Polymer Amsterdam. Elsevier Science Publishers B.V., pp 65-74
9. Sean, S.T. · Int. Journal Solids & Structures · 1991
10. Nir, M.M. · Plastics Engineering · 1990 · 46 · 29
11. Nielsen, L.E. · 1974