journal article·2023-06

Investigation of analysis and improvement of the assessment of bonding performance for thermoplastic composites

Hongquan Liu, Yong Li, Dajun Huan, Dan Zeng, Xiaodong Chen, Wuqiang Wang, Jun Xiao, Yanrui Li, Yang Jiao

Publisher page

Abstract

A lap shear test is employed to evaluate the interfacial bonding strength between unidirectional CF/PEEK tapes as quantification of bonding quality. In this study, a novel tab is proposed to ameliorate bonding testing. The crucial role of developed tabs is to avoid the adherend fracture that is typically observed in specimens with conventional tabs. Specimens with different tab, bonding processes, and lap lengths are prepared and tested. Moreover, theoretical analysis is conducted to predict bonding strength, and finite element simulations are also performed for stress distribution in these specimens with different types of tabs. The experimental and theoretical results demonstrate that the full tab is employed in the bonding test, the stress concentration reduces nearly by 6 times, and the failure mode coincides with the expected requirement. Additionally, the highest estimation of bonding strength increases nearly by 69%, and is approximately consistent with the theoretical calculation, up to 98.6%. This tab configuration, with low dependence on processes and joint parameters, describes a straightforward and efficient procedure to meliorate the quantification of the bonding strength, and is found to be applicable in the tape placement process and single-lap-joint assemblies for thermoplastic composites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Epoxy Resin Curing Processes · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

The National Key Laboratory of Science and Technology on Helicopter Transmission, Nanjing University of Aeronautics and Astronautics, Nanjing, China

Department of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing, China

Funding

National Key Laboratory of Science and Technology on Helicopter Transmissio

References (34)

Show source-provided references
1. 10.1016/j.compositesb.2013.01.02610.1016/j.compositesb.2013.01.026 ↗
2. 10.1007/978-3-319-01884-3_1310.1007/978-3-319-01884-3_13 ↗
3. 10.1177/08927057970100060410.1177/089270579701000604 ↗
4. 10.1016/j.repl.2015.08.06710.1016/j.repl.2015.08.067 ↗
5. 10.1016/j.compositesa.2015.08.00810.1016/j.compositesa.2015.08.008 ↗
6. 10.1016/j.compositesa.2014.10.00310.1016/j.compositesa.2014.10.003 ↗
7. 10.1002/app.4164310.1002/app.41643 ↗
8. 10.1177/089270571245603110.1177/0892705712456031 ↗
9. Khan MA, Schledjewski R. Influencing factors for an online consolidating thermoplastic tape placement process. In: Process 17th International Conference Composite Materials. Edinburgh, UK, 27–31 July 2009, D12.4, pp. 1–10.
10. Nicodeau C, Cinquin J, Regnier G, et al. In-situ consolidation process optimization for thermoplastic matrix composites. In: Processing SAMPE 2006 technical conference proceedings. Long Beach, CA, USA; 30 April–4 May 2006.
11. 10.1002/adv.2017710.1002/adv.20177 ↗
12. 10.1177/096739111880920510.1177/0967391118809205 ↗
13. 10.1007/s12289-010-0868-z10.1007/s12289-010-0868-z ↗
14. 10.1016/j.compositesa.2012.04.01010.1016/j.compositesa.2012.04.010 ↗
15. 10.1016/j.compositesa.2013.03.00310.1016/j.compositesa.2013.03.003 ↗
16. 10.1016/j.compositesa.2015.12.01910.1016/j.compositesa.2015.12.019 ↗
17. 10.1177/00219983920260160210.1177/002199839202601602 ↗
18. 10.1021/ma010858o10.1021/ma010858o ↗
19. 10.1016/j.ijadhadh.2018.02.03510.1016/j.ijadhadh.2018.02.035 ↗
20. 10.1098/rsos.17127210.1098/rsos.171272 ↗
21. 10.1177/08927057980110040410.1177/089270579801100404 ↗
22. 10.1177/002199830606016210.1177/0021998306060162 ↗
23. 10.1002/pc.1002710.1002/pc.10027 ↗
24. 10.1016/j.compositesb.2014.05.02510.1016/j.compositesb.2014.05.025 ↗
25. 10.1177/089270571666251610.1177/0892705716662516 ↗
26. 10.1016/S0263-8223(97)00062-710.1016/S0263-8223(97)00062-7 ↗
27. 10.1016/j.compstruct.2021.11416610.1016/j.compstruct.2021.114166 ↗
28. D14 Committee. Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding.
29. 10.1016/j.compstruct.2008.11.00210.1016/j.compstruct.2008.11.002 ↗
30. 10.1177/002199831454130810.1177/0021998314541308 ↗
31. 10.1016/j.compstruct.2020.11259510.1016/j.compstruct.2020.112595 ↗
32. 10.1016/j.compositesa.2013.08.00810.1016/j.compositesa.2013.08.008 ↗
33. 10.1016/j.ijadhadh.2014.11.00110.1016/j.ijadhadh.2014.11.001 ↗
34. 10.1016/j.matdes.2012.08.00110.1016/j.matdes.2012.08.001 ↗