journal article·1990-07

Composites Reinforced with Fibers of a Thermotropic Liquid Crystal Copolyester

Richard L. Brady, Roger S. Porter

Publisher page

Abstract

Composites reinforced with a thermotropic liquid crystal copolyester fiber (Celanese Vectran) have been studied with regard to fiber properties and adhesion to the thermoplastic matrix. As-spun (AS) and heat-treated (HT) fibers have been characterized. Heat treatment increases the crystal-to-nematic transition by 40°C, increases the modulus by 18%, and doubles the strength. Composites made with Vectran fibers (HT) require processing at or below 275°C, since fiber properties reduce significantly above this tem perature, which corresponds to the transition for AS fibers Composites made with Vec tran fibers were found to have low transverse properties, independent of thermoplastic matrix. The matrix compositions tested were a bisphenol-A polycarbonate and liquid crys tal copolyester with the same monomers as the fiber. Small trials were also conducted with other thermoplastics. Specific fiber surface treatments, such as oxidation with ozone, did increase transverse properties, but values remained low compared to the bulk matrix. Scanning electron microscopy of transverse fracture surfaces indicates that fiber splitting occurs, especially for surface treated fibers. Poor fiber transverse properties (low inter- chain interaction), rather than fiber/matrix adhesion, thus appear to be limiting composite transverse properties, especially in composites with surface treated fibers.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Synthesis and properties of polymers · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Polymer Science and Engineering Department University of Massachusetts Amherst, Massachusetts 01003

References (29)

Show source-provided references
1. Brady, R.L. · J Appl Polym Sci · 1989
2. Calundann, G.W. · 1986
3. Bailey, D.S. · Eur Pat Appl · 1982 · 51 · 933
4. 1984
5. 1985
6. 1984
7. Cincotta, D.E. · 1984
8. Kiss, G.D. · 1986
9. Robeson, L.M. · 1986
10. Kiss, G.D. · 1986
11. Hyikata, K. · 1987
12. Chung, T.S. · Plast Eng · 1987 · 43 · 39
13. 10.1016/0032-3861(85)90307-610.1016/0032-3861(85)90307-6 ↗
14. Swaminathan, S. · Polym Mat. Sci. Eng. · 1987 · 57 · 330
15. Isayev, A.I. and M.J. Modic 1986 SPE ANTEC, 573
16. Federico, O. · 1988
17. Ide, Y. · Eur Pat Appl · 1983 · 72 · 210
18. Ikenaga, Y. · 1986
19. 1985
20. 1984
21. 1986
22. Allen, S.R. · 1983
23. Brady, R.L. · J Mat Sci.. · 1989
24. 10.1515/POLYENG.1987.7.3.19710.1515/POLYENG.1987.7.3.197 ↗
25. Kaplan, S.L.
26. Nebel, C. 1981 Kirk-Othmer Encyclopedia of Chemical Technology , Volume 16 New York John Wiley and Sons, p 683
27. 10.1016/0014-3057(71)90111-X10.1016/0014-3057(71)90111-X ↗
28. 10.1002/pol.1982.17020071310.1002/pol.1982.170200713 ↗
29. 10.1007/BF0111573510.1007/BF01115735 ↗