Development of an On-Line, In-Situ, Fiber-Optic Void Sensor
Source abstract
Abstract
Porosity is a common defect introduced during the molding of composite laminates, particularly with thick, complex, or high-production-rate parts. The deleterious effect of voids on the mechanical properties of composites has been well documented. Clearly, improved process control is needed to minimize voids. To this end, work has been initiated to develop an in-situ sensor for void detection that is nonintrusive, nondestructive, simple, reliable, of reasonable cost and able to withstand harsh curing en vironments. Initial development of an intensity-based fiber optic sensor using refractive in dex changes is summarized. The many factors that affect the sensor response are dis cussed, but the refractive index of the resin is found to be the only non-extraneous factor that affects light guidance in the sensor. Further, it is concluded that changes in the resin degree of cure and temperature can account for changes in the resin refractive index. An experimental approach for sensor calibration and operation is proposed, including description of an image analysis study to relate sensor signal to void size and distribution. A theoretical approach is also proposed that is based on a model for the sensor response given the state of the resin.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advancements in Photolithography Techniques · Epoxy Resin Curing Processes · Advanced Fiber Optic Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Chemical and Materials Engineering Department University of Dayton Dayton, OH 45469-0246
References (17)
Show source-provided references
1. Berglund, L.A. · SAMPE Journal · 1991 · 27 · 32
2. Dave, R.S., et al. · SAMPE Journal · 1990 · 26 · 31
3. Fanconi, B. · SAMPE Journal · 1989 · 25 · 35
4. King, R. · SAMPE Journal · 1992 · 28 · 35
5. Klosterman, D.A. · Proceedings from the 38th International SAMPE Symposium and Exhibition · 1993 · 1322
6. Keiser, G. Optical Fiber Communications. 2nd ed. McGraw-Hill, Inc., p. 44.
7. Klosterman, D.A.
8. Anderson, R.E. · 1991
9. Skoog, D.A. and D.M. West. 1971. Principles of Instrumental Analysis . Holt, Rinehart and Winston, Inc., pp. 302-303.
10. 10.1117/12.96309110.1117/12.963091 ↗
11. Dannenberg, H. · SPE Journal · 1959 · 875
12. Chiao, L. · SAMPE Journal · 1990 · 27
13. Young, P.R. · SAMPE Journal · 1989 · 25 · 11
14. 10.1117/12.96309110.1117/12.963091 ↗
15. Sung, N., W. Dang, H. Paik and C.S.P. Sung. 1991. "In-Situ Monitoring of Epoxy Cure by Fiber-Optic Molecular Sensors," 37th International SAMPE Symposium Conference Proceedings, (April 15-18), pp. 1461-1473.
16. Strobel, H.A. 1973. Chemical Instrumentation, 2nd ed. Addison-Sesley Publishing Co., p. 594.
17. 10.1364/JOSA.64.00059910.1364/JOSA.64.000599 ↗