A Strength Prediction Methodology in Regions of Matrix-Dominated Stress Concentrations
Source abstract
Abstract
A point stress criterion based on stress distribution, in conjunction with Hashin's interactive failure criteria for fiber composites, is applied to composite laminates containing throughthickness discontinuities. The point stress criterion assumes that failure occurs when the stress over some distance (characteristic distance) from the discontinuity is equal to or greater than the strength of the material without the discontinuity. The characteristic distance is determined from Vnotched beam specimens cut through the thickness of AS4/3501-6, S2 glass/3501-6, and AS4/PEEK unidirectional laminates. This characteristic distance is then used to estimate the strength of inplane Vnotched beam specimens, transverse flexure specimens, and an AS4/PEEK doublenotched cylinder loaded in axial compression. Good correlation between the predicted and measured strength was obtained for this case. Based on these results, additional investigations with other material systems and more interactive stress states are warranted.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Composite Structure Analysis and Optimization · Epoxy Resin Curing Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Composites and Resins Branch, Code 644, Carderock Division, Naval Surface Warfare Center, Annapolis, MD 21402
Composite Structures, Hercules Aerospace-Bacchus Works, PO. Box 98, Magna, UT 84044
Code 601, Carderock Division, Naval Surface Warfare Center, Annapolis, MD 21402
References (30)
Show source-provided references
1. 1. Sumich, M. and K. Kedward. 1991. "Development of a Fatigue-Life Methodology for Composite Structures Subjected to Out-of-Plane Load Components," NASA TM 102885.
2. 2. Paul, P. C., C. R. Saff, K. B. Sanger, M. A. Mahler, H. P. Kan and E. F. Kautz. 1989. "Out of Plane Analysis for Composite Structures," Eighth DOD/NASA/FAA Conference on Fibrous Composites in Structural Design, Norfolk, VA.
3. 10.1177/00219983880220120510.1177/002199838802201205 ↗
4. 10.1520/STP36479S10.1520/STP36479S ↗
5. 10.1177/00219983740080030310.1177/002199837400800303 ↗
6. 10.1520/STP34795S10.1520/STP34795S ↗
7. 10.1177/00219983780120030210.1177/002199837801200302 ↗
8. 10.1177/00219983790130010410.1177/002199837901300104 ↗
9. 9. Hoffman, P. and J. J. Kelly. 1992. "Manufacture of Advanced Composite Submarine Structures (MACSS)," Proc. 37th International SAMPE Symposium.
10. 10. Leon, G. F. and B. Coffenberry. 1992. "Proposed Fabrication Processes for Thick Composite Submarine Structures," Proc. 37th International SAMPE Symposium.
11. 10.1115/1.315366410.1115/1.3153664 ↗
12. 10.1520/STP10027S10.1520/STP10027S ↗
13. 10.1007/BF0232868810.1007/BF02328688 ↗
14. 10.1177/00219983870210060110.1177/002199838702100601 ↗
15. 10.1177/00219983940280060410.1177/002199839402800604 ↗
16. 16. Hibbitt, Karlsson and Sorensen. 1992. "ABAQUS User's Manual," Version 4.9, Providence, R.I.: Hibbitt, Karlsson, and Sorensen, Inc.
17. 10.1177/00219983840180010610.1177/002199838401800106 ↗
18. 10.1177/00219983730070020110.1177/002199837300700201 ↗
19. 10.1177/00219983730070021010.1177/002199837300700210 ↗
20. 10.1177/00219983920260050510.1177/002199839202600505 ↗
21. 21. Pecknold, D. A. 1990. "A Framework for 3-D Nonlinear Modeling of Thick-Section Composites," DTRC/SME90-92.
22. 22. Gipple, K. L. 1992. "3-D Nonlinear Constitutive Modeling Approach for Composite Materials," CDNSWC-SME-92/25.
23. 10.1016/0266-3538(90)90080-O10.1016/0266-3538(90)90080-O ↗
24. 24. ASTM Specification D3039-76. 1983. "Test Method for Tensile Properties of Fiber-Resin Composites," ASTM Book of Standards, Vol. 15.03.
25. 25. Shigley, J. E. and L. D. Mitchell. 1983. Mechanical Engineering Design 4th ed., New York, NY: McGraw-Hill Book Co.
26. 10.1177/08927057930060040110.1177/089270579300600401 ↗
27. 27. Jones, R. M. 1975. Mechanics of Composite Materials, New York, NY: McGraw-Hill Book Co.
28. 28. Hercules Manufacturer's Data Sheet on AS4/3501-6.
29. 29. ICI Fiberite Manufacturer's Data Sheet on AS4/PEEK.
30. 30. Camponeschi, E. T. 1990. "Compression Response of Thick-Section Composite Materials," DTRC-SME-90/60.