journal article·2026-05

Optimal design of reinforced thermoplastic pipelines for hydrogen transportation by Kriging Model and genetic algorithm

Caixia Guo, Feng Gao, Yuewen Su, Ke Zhang, Xiaoye Wang, Zhifeng Yang, Xiaoyu Zhang, Yaozhou Wang

Publisher page

Abstract

Hydrogen has a great potential for application as a green energy source. Composite hydrogen pipeline is an important way of hydrogen transportation, and its engineering demand prospects are also very broad. This paper uses the finite element simulation method in combination with the Tsai-Wu failure criterion to derive the burst pressure of hydrogen transport pipelines under internal pressure and bending conditions as 28.5 MPa and the minimum bending radius as 1591.6 mm. Through hydrostatic pressure testing, the internal pressure of the pipeline was determined to be 28.8 MPa, with an error of 1.04%, verifying the validity of the simulation. The reinforcement layer of the pipeline was optimized using a Kriging surrogate model combined with the NSGA-II genetic algorithm based on simulation results. Through normalized result processing, the optimized parameters of the reinforcement layer were obtained (layer angle 55°, number of layers 8, thickness of single layer 0.3 mm), and finite element simulation verification was conducted, yielding an internal pressure of 22.3 MPa and a minimum bending radius of 1439.6 mm for the pipeline. The optimization approach achieves improved lightweight and economic performance under engineering constraints, demonstrating its feasibility and application potential.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Topology Optimization in Engineering · Advanced Multi-Objective Optimization Algorithms · Structural Integrity and Reliability Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Baoji University of Arts and Sciences

Shaanxi Key Laboratory of Advanced Manufacturing and Evaluation of Robot Key Components

Baoji Tianlian Huitong Composite Materials Co., Ltd

Funding

Natural Science Foundation of Shaanxi Province · Education Department of Shaanxi Province

References (36)

Show source-provided references
1. 10.1016/j.enpol.2005.12.00610.1016/j.enpol.2005.12.006 ↗
2. 10.1016/j.ijhydene.2025.04.23910.1016/j.ijhydene.2025.04.239 ↗
3. 10.1016/j.erss.2022.10284710.1016/j.erss.2022.102847 ↗
4. 10.1038/s41598-025-86957-110.1038/s41598-025-86957-1 ↗
5. 10.1016/j.ijhydene.2021.12.10810.1016/j.ijhydene.2021.12.108 ↗
6. 10.1021/acs.chemrev.3c0062410.1021/acs.chemrev.3c00624 ↗
7. 10.1016/j.ijhydene.2018.06.06410.1016/j.ijhydene.2018.06.064 ↗
8. 10.1016/j.scitotenv.2024.17362210.1016/j.scitotenv.2024.173622 ↗
9. 10.1016/B978-0-323-52472-8.00007-110.1016/B978-0-323-52472-8.00007-1 ↗
10. 10.1016/j.rineng.2024.10197910.1016/j.rineng.2024.101979 ↗
11. 10.1016/j.compstruct.2015.05.03310.1016/j.compstruct.2015.05.033 ↗
12. Shao Q, Liu T, Yuan S, et al. Prediction of internal pressure of flexible pipe. Int Conf Offshore Mech Arctic Eng 2019; 58806, V05AT04A011.
13. Yao L, Wang S, He W. Nonlinear mechanical analysis of reinforced thermoplastic pipe under combined bending and pressure based on a solid element model. The 28th international ocean and polar engineering conference. Sapporo, Japan: ISOPE-I-18-426, 2018.
14. 10.1016/j.apor.2018.07.00710.1016/j.apor.2018.07.007 ↗
15. 10.1016/j.compstruct.2014.09.01510.1016/j.compstruct.2014.09.015 ↗
16. 10.1016/j.oceaneng.2021.10876610.1016/j.oceaneng.2021.108766 ↗
17. 10.1016/j.marstruc.2020.10282610.1016/j.marstruc.2020.102826 ↗
18. 10.1016/j.oceaneng.2014.10.00210.1016/j.oceaneng.2014.10.002 ↗
19. 10.1080/17445302.2013.83514710.1080/17445302.2013.835147 ↗
20. 10.1115/1.138807510.1115/1.1388075 ↗
21. Murata T, Ishibuchi H. MOGA: multi-objective genetic algorithms. IEEE international conference on evolutionary computation. IEEE Piscataway 1995; 1: 289–294.
22. 10.1016/j.strusafe.2011.02.00110.1016/j.strusafe.2011.02.001 ↗
23. 10.1016/j.marstruc.2019.10270410.1016/j.marstruc.2019.102704 ↗
24. 10.1134/S002189442404014X10.1134/S002189442404014X ↗
25. Yang Z, Yan J, Lu Q, et al. Multi-objective shape optimization design for LNG cryogenic helical corrugated steel pipe. Int Conf Offshore Mech Arctic Eng 2016; 49965: V005T04A022.
26. 10.3390/jcs603009610.3390/jcs6030096 ↗
27. Yu K. Nonlinear modelling and analysis of reinforced thermoplastic pipes for offshore applications. Diss. Sydney: UNSW, 2015.
28. 10.1177/0892705724124571010.1177/08927057241245710 ↗
29. 10.1007/BF0028225310.1007/BF00282253 ↗
30. 10.1177/00219983710050010610.1177/002199837100500106 ↗
31. 10.1007/978-981-16-3211-2_610.1007/978-981-16-3211-2_6 ↗
32. 10.1214/aos/106936231010.1214/aos/1069362310 ↗
33. 10.1080/0269379900894154910.1080/02693799008941549 ↗
34. 10.1016/j.energy.2025.13530610.1016/j.energy.2025.135306 ↗
35. 10.1109/4235.99601710.1109/4235.996017 ↗
36. 10.3390/app13181046510.3390/app131810465 ↗