journal article·2026-02-08

Enhanced interfacial bonding in UHMWPE fiber composites using one-step impregnation combined with EP activation

Chao Lu, Hang Yue, Junsheng Wang, Hongyang Wang, Ke Shang, Weiping Han, Xiaohong Qin

Publisher page

Abstract

The identification of a practical and more effective surface modification method for improving the interfacial adhesion and bonding capacity of ultra-high molecular weight polyethylene (UHMWPE) has been the research focus in the field of UHMWPE fibers. In this research, a ONE-STEP impregnation process was developed and investigated. The surface analysis revealed that consistent coating was generated on the fiber surface, leading to a significantly increased surface roughness. The chemical species and functional groups on the fiber were characterised by XPS and ATR-FTIR. Microdroplet test showed that the UHMWPE/EP interfacial shear strength (IFSS) was increased by 338.1%, indicating successful functional groups introduction. The increase of fiber surface roughness was synchronously validated in the experiment of yarn pull out from fabric with an increase of 398.9%. The duration of processing was considerably reduced by the revolutionary ONE-STEP impregnation process with efficiency improvement of 63.6% on the premise of strong interface bonding. By utilizing a strong interface between the UHMWPE and epoxy as a transition layer, the adhesion strength between the UHMWPE and TPU was enhanced to 33.1 N . This advancement presents new opportunities for interfacial properties enhancement of non-reactive fiber-reinforced composites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Polymer crystallization and properties · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Research Division 6, Tianjin Fire Science and Technology Research Institute of MEM

Tiangong University

Key Laboratory of Fire Protection Technology for Industry and Public Building

Ministry of Emergency Management

Tianjin Key Laboratory of Fire Safety Technology

Flood Emergency Rescue Technology and Equipment Co-Innovation Lab of the Ministry of Emergency Management

Donghua University

Funding

National Key R&D Program of China · China Postdoctoral Science Foundation-Tianjin Joint Support Program

References (46)

Show source-provided references
1. 10.1016/j.compositesb.2024.11129410.1016/j.compositesb.2024.111294 ↗
2. 10.3390/ma1007079110.3390/ma10070791 ↗
3. 10.1016/j.compositesb.2016.05.05910.1016/j.compositesb.2016.05.059 ↗
4. 10.1002/pen.2463310.1002/pen.24633 ↗
5. 10.1021/acsapm.9b0072110.1021/acsapm.9b00721 ↗
6. 10.1177/0892705722111571310.1177/08927057221115713 ↗
7. Zhang R, Song XT, Zheng BQ, et al. Effect of hybrid strategies on the ballistic response of aramid/ultra-high molecular weight polyethylene woven fabrics. Textil Res J 2024: 00405175231226101.
8. 10.3390/polym1510228110.3390/polym15102281 ↗
9. 10.1007/s10443-021-09944-510.1007/s10443-021-09944-5 ↗
10. 10.1007/s12221-014-2395-x10.1007/s12221-014-2395-x ↗
11. 10.1016/j.compositesa.2020.10614610.1016/j.compositesa.2020.106146 ↗
12. 10.1016/j.eurpolymj.2021.11035210.1016/j.eurpolymj.2021.110352 ↗
13. 10.1016/j.pcrysgrow.2018.07.00110.1016/j.pcrysgrow.2018.07.001 ↗
14. 10.1039/D3RA08577E10.1039/D3RA08577E ↗
15. 10.1007/s10973-019-08428-w10.1007/s10973-019-08428-w ↗
16. 10.1002/pen.2001810.1002/pen.20018 ↗
17. 10.3390/polym1303040410.3390/polym13030404 ↗
18. 10.1002/(SICI)1097-4628(19991017)74:3<670::AID-APP21>3.0.CO;2-810.1002/(SICI)1097-4628(19991017)74:3<670::AID-APP21>3.0.CO;2-8 ↗
19. Ramos JL, Qiao Y, Ni YL, et al. Fabrication of thermoplastic polymer-fiber-reinforced polymer composites through automated powder dispersion and compression molding. J Thermoplast Compos 2026: 294618513.
20. 10.1080/0022234080268281710.1080/00222340802682817 ↗
21. 10.1016/j.surfcoat.2010.10.04110.1016/j.surfcoat.2010.10.041 ↗
22. 10.1016/j.mtcomm.2019.10072310.1016/j.mtcomm.2019.100723 ↗
23. 10.1016/j.radphyschem.2010.07.02810.1016/j.radphyschem.2010.07.028 ↗
24. 10.1515/epoly-2019-000610.1515/epoly-2019-0006 ↗
25. 10.1023/A:100895732487810.1023/A:1008957324878 ↗
26. 10.1126/science.114724110.1126/science.1147241 ↗
27. 10.1016/j.matdes.2024.11270710.1016/j.matdes.2024.112707 ↗
28. 10.1016/j.surfin.2022.10172810.1016/j.surfin.2022.101728 ↗
29. 10.1021/acssuschemeng.7b0087110.1021/acssuschemeng.7b00871 ↗
30. 10.1002/pc.2496310.1002/pc.24963 ↗
31. 10.1002/app.4985110.1002/app.49851 ↗
32. 10.1016/j.compscitech.2015.03.01710.1016/j.compscitech.2015.03.017 ↗
33. 10.1002/sia.620310.1002/sia.6203 ↗
34. 10.1016/j.compscitech.2017.08.00810.1016/j.compscitech.2017.08.008 ↗
35. 10.3390/polym1108123110.3390/polym11081231 ↗
36. 10.1680/jgrma.22.0010310.1680/jgrma.22.00103 ↗
37. Bo Z, Sixian C, Wencai W, et al. Polyester (PET) fabrics coated with environmentally friendly adhesive and its interface structure and adhesive properties with rubber. Compos Sci Technol 2020; 195(9): 108171.
38. 10.1016/j.apsusc.2014.08.12410.1016/j.apsusc.2014.08.124 ↗
39. Chao L, Junsheng W, Hongyang W, et al. Enhancing interfacial adhesion deprotonation and mussel-inspired coating of aramid fiber. ACS Appl Polym Mater 2024; 6(14): 8.
40. 10.1021/acssuschemeng.8b0029010.1021/acssuschemeng.8b00290 ↗
41. 10.1016/j.triboint.2016.11.01310.1016/j.triboint.2016.11.013 ↗
42. 10.1080/00218464.2016.122960310.1080/00218464.2016.1229603 ↗
43. 10.1016/j.compositesb.2021.10898310.1016/j.compositesb.2021.108983 ↗
44. 10.1007/s12668-011-0032-310.1007/s12668-011-0032-3 ↗
45. 10.1177/004051751769062310.1177/0040517517690623 ↗
46. 10.1016/j.compscitech.2022.10948110.1016/j.compscitech.2022.109481 ↗