Performance evaluation of recycled nylon polymer gears
Source abstract
Abstract
This study investigates the performance of three different gears manufactured by injection moulding using: (i) virgin Nylon 6, (ii) a blend of 15% recycled Nylon 6 with virgin Nylon 6 (referred to as 15% RP material), and (iii) 15% RP material reinforced with 2% graphene oxide (GO). The compounding of materials was carried out using a twin-screw extruder, followed by gear fabrication through injection moulding. To evaluate the performance of the gears, tests such as wear analysis, surface roughness measurement, and temperature rise assessment of both the driving and driven gears were carried out under varying operating conditions. The experiments were performed at torque levels of 0, 4, 6, and 8 Nm, and rotational speeds of 800, 1000, and 1200 rpm. Among the three materials, the Graphene Oxide-reinforced composite exhibited superior performance, showing the lowest wear rate, reduced surface roughness, and better thermal stability across all torque and speed conditions. The improved behaviour of the GO-reinforced gear can be attributed to the uniform dispersion of GO nanosheets, which enhanced load-bearing capacity, interfacial bonding, and heat dissipation within the polymer matrix. In contrast, the pristine Nylon 6 gears displayed higher wear and surface roughness due to their limited thermal conductivity and susceptibility to surface deformation at elevated loads, while the 15% recycled Nylon 6 blend showed intermediate performance, maintaining acceptable tribological stability with moderate degradation. The incorporation of recycled content contributed positively to sustainability and circular economy goals, demonstrating that partial recycling does not critically compromise gear functionality.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Gear and Bearing Dynamics Analysis · Lubricants and Their Additives
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Chemical Technology
Gharda Institute of Technology
Thakur College of Engineering and Technology
References (30)
Show source-provided references
1. Tavčar J, Huskić M. Challenges in the engineering design, manufacture, and testing of polymer gears. In: Polymer Gears. Elsevier, 2024, pp. 1–19.
2. 10.1016/j.tws.2025.11366610.1016/j.tws.2025.113666 ↗
3. Li W, Daman AAA, Smith W, et al. Wear performance and wear monitoring of nylon gears made using conventional and additive manufacturing techniques. J Dyn Monit Diagnostics 2025; 4: 101–110.
4. 10.1016/j.wear.2006.06.00510.1016/j.wear.2006.06.005 ↗
5. Zorko D, Kulovec S, Tavčar J, et al. Different teeth profile shapes of polymer gears and comparison of their performance. In: Journal of Advanced Mechanical Design, Systems and Manufacturing. Japan Society of Mechanical Engineers, 2017. https://doi.org/10.1299/jamdsm.2017jamdsm0083
6. 10.1177/089270572094421310.1177/0892705720944213 ↗
7. 10.1155/2022/297423710.1155/2022/2974237 ↗
8. 10.3390/ijms2012297510.3390/ijms20122975 ↗
9. 10.1177/0892705722110891210.1177/08927057221108912 ↗
10. 10.1177/089270571246151110.1177/0892705712461511 ↗
11. 10.1177/089270571561040710.1177/0892705715610407 ↗
12. 10.1177/089270572097934710.1177/0892705720979347 ↗
13. 10.1177/089270571559943110.1177/0892705715599431 ↗
14. Koriem OA, Hassan HS, Rafea MA, et al. Basic characteristics of polymers for polymer-based gear. Polym Gears 2024: 21–44.
15. 10.1021/acs.iecr.4c0197510.1021/acs.iecr.4c01975 ↗
16. Jadhav PN, Sahai RSN, Biswas D, et al. Comparative study of mechanical properties of multiwall carbon nanotubes and functionalized multiwall carbon nanotubes/poly aryl ether ketone nanocomposites. Iran J Mater Sci Eng; 20: 3446. https://doi.org/10.22068/ijmse.3446
17. 10.1016/j.triboint.2009.07.00610.1016/j.triboint.2009.07.006 ↗
18. Mundo D, Gagliardi F. Recent developments in hybrid metal-composite gears. In: Polymer Gears. Elsevier, 2024, pp. 149–170.
19. Tayong Boumda R, Keen R. Deformability, noise, and vibrations of polymer gears. In: Polymer Gears. Elsevier, 2024, pp. 199–217.
20. 10.1016/j.wear.2008.10.00510.1016/j.wear.2008.10.005 ↗
21. Kamble SA, Sahai R, Biswas D. Effect of nanofiller on the mechanical and electrical properties of recycle nylon 6. J Thermoplast Compos Mater. 2025; 08927057251368880. https://doi.org/10.1177/08927057251368880
22. Singh S, Yadav YK, Siddhartha S, et al. Exploration on wear characteristics: performance of gears of Polyamide66. In: Lecture Notes in Mechanical Engineering. Springer Science and Business Media Deutschland GmbH, 2021, pp. 581–589.
23. 10.1016/j.triboint.2008.08.01110.1016/j.triboint.2008.08.011 ↗
24. 10.4028/www.scientific.net/MSF.561-565.223710.4028/www.scientific.net/MSF.561-565.2237 ↗
25. Achilias DS. PC nylon PMMA. https://www.intechopen.com
26. Montani S, Hamon C. Polymer formulations for gears. In: Polymer Gears. Elsevier, 2024, pp. 45–57.
27. McKeen LW. The effect of UV light and weather on plastics and elastomers. Part of series: Plastics Design Library 2013, 073295. https://doi.org/10.1016/C2011-0-07329-5
28. 10.1016/j.wear.2007.01.01310.1016/j.wear.2007.01.013 ↗
29. 10.1007/s11249-018-1096-910.1007/s11249-018-1096-9 ↗
30. 10.3390/polym1317286710.3390/polym13172867 ↗