journal article·2026-04-17

Regulatory mechanism of medium characteristics on defect evolution and mechanical properties in friction stir welded CFRP joints

Chenhuan Tang, Yibo Sun, Jie Teng, Haoxuan Cao, Libin Fu

Publisher page

Abstract

The engineering application of carbon fiber-reinforced polymers (CFRP) in lightweight structural systems is constrained by joining defects in friction stir welding (FSW). Current research lacks systematic comparison and mechanism analysis of different auxiliary media for CFRP FSW. This study comparatively investigates the regulation mechanism of aqueous medium and cutting fluid on defect evolution and mechanical properties of CFRP FSW joints. Results demonstrate that cutting fluid achieves a precise balance between welding heat input and cooling rate via synergistic cooling–lubrication effects, overcoming the defect sensitivity caused by the single cooling function of aqueous medium. The intrinsic regulation mechanism of auxiliary media on defect formation is revealed, and cutting fluid is verified to significantly improve joint compactness, suppress interfacial degradation, and enhance mechanical performance. These findings fill the knowledge gap in medium-assisted CFRP FSW and support high-quality joining of high-performance CFRP components.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Mechanical Behavior of Composites · Epoxy Resin Curing Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Dalian Jiaotong University

Huaibei Institute of Technology

Liaodong University

Funding

Liaoning Science and Technology Plan Joint Plan

References (32)

Show source-provided references
1. 10.1016/j.paerosci.2018.01.00110.1016/j.paerosci.2018.01.001 ↗
2. 10.1016/j.pmatsci.2017.04.00210.1016/j.pmatsci.2017.04.002 ↗
3. 10.1007/s00170-025-16304-110.1007/s00170-025-16304-1 ↗
4. 10.1016/j.jmapro.2024.07.06710.1016/j.jmapro.2024.07.067 ↗
5. 10.1016/j.jmrt.2026.01.03210.1016/j.jmrt.2026.01.032 ↗
6. 10.1016/j.jmrt.2023.10.15810.1016/j.jmrt.2023.10.158 ↗
7. 10.1016/j.jmapro.2018.10.00510.1016/j.jmapro.2018.10.005 ↗
8. 10.1007/s40964-025-01160-y10.1007/s40964-025-01160-y ↗
9. 10.1007/s12613-018-1700-x10.1007/s12613-018-1700-x ↗
10. Cam G, Mistikoglu S, Pakdil M. Microstructural and mechanical characterization of friction stir butt joint welded 63%Cu-37%Zn brass plate. Weld J 2009; 88(11): 225s–232s.
11. 10.1088/1757-899X/629/1/01201010.1088/1757-899X/629/1/012010 ↗
12. 10.1016/S1875-5372(19)30018-910.1016/S1875-5372(19)30018-9 ↗
13. 10.1016/S1359-6454(03)00319-710.1016/S1359-6454(03)00319-7 ↗
14. 10.3390/ma1324583210.3390/ma13245832 ↗
15. Yeong YJ, Chung JH, Donghyeon L, et al. Dissimilar material bonding technology for lightweight future mobility: a review. Polym Test 2023; 58: 108281.
16. 10.1016/j.jmapro.2023.12.05010.1016/j.jmapro.2023.12.050 ↗
17. Rayapandi T, Suresh P. An overview of welding methods for advanced materials: testing and evaluation. Adv Man Tech Eng Eng Mater 2022; 22: 198–225.
18. Fayaz MA, Noor KZ, Arshad SN, et al. Friction based solid state welding – a review. Mater Today Proc 2022; 62(P1): 55–62.
19. 10.3390/ma1715379910.3390/ma17153799 ↗
20. 10.1016/j.proeng.2012.06.45010.1016/j.proeng.2012.06.450 ↗
21. 10.1016/j.proeng.2014.12.35010.1016/j.proeng.2014.12.350 ↗
22. 10.1051/epjconf/2010060700310.1051/epjconf/20100607003 ↗
23. 10.1007/s40430-020-2227-410.1007/s40430-020-2227-4 ↗
24. 10.1016/j.mtcomm.2018.09.00910.1016/j.mtcomm.2018.09.009 ↗
25. Mostafapour A, Azarsa E. A study on the role of processing parameters in joining polyethylene sheets via heat assisted friction stir welding: investigating microstructure, tensile and flexural properties. Int J Phys Sci 2012; 7(4): 647–654.
26. 10.1080/13621718.2017.136489610.1080/13621718.2017.1364896 ↗
27. Arif M, Kumar D, Siddiquee AN. Mechanical properties and defects in friction stir welded acrylonitrile butadiene styrene polymer. Proc Inst Mech Eng Part L 2023; 237(9): 1897–1909. https://doi.org/10.1177/14644207231161189
28. Zafar A, Awang M, Khan SR, et al. Investigating friction stir welding on thick nylon 6 plates. Weld J 2016; 95(6): 210–218.
29. 10.1007/s00170-015-7663-410.1007/s00170-015-7663-4 ↗
30. 10.1016/j.matdes.2015.07.09510.1016/j.matdes.2015.07.095 ↗
31. 10.1016/j.measurement.2018.05.00510.1016/j.measurement.2018.05.005 ↗
32. 10.1080/0950711080193605110.1080/09507110801936051 ↗