journal article·2026-04-24

Influence of MgO and TiO 2 nanoparticles on linear low-density polyethylene (LLDPE) nanocomposites for cable application

Bibhudatta Paikaray, Jayakrushna Moharana, Radhashyam Giri

Publisher page

Abstract

Present investigation, MgO and TiO 2 nanoparticles are specially used as fillers in linear low-density polyethylene (LLDPE) for power cable insulation. The arrangement and spread of the nanoparticles with varying nanoparticle ratios (MgO and TiO 2 ) within the LLDPE using melt blending process and properties are evaluated via mechanical, Field Emission Scanning Electron Microscopy (FESEM), electrical, dielectric, thermal, and dielectric breakdown strength. Improvements have been observed in tensile strength (23% and 27%), flexural strength (21.5% and 26.2%), impact strength (15.6% and 18.4%), thermal stability (35.42°C and 16.89°C), dielectric breakdown strength (48% and 41%) and melting point (3.4°C and 6.0°C) of MgO and TiO 2 nanocomposites, respectively, compare to neat LLDPE. Furthermore, thermal stability and dielectric breakdown strength (DBS) of magnesium-based nanocomposites demonstrated superior performance in comparison to titania-based nanocomposites. These findings indicate that the potential of both nanocomposites are suitable for applications for cable application.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High voltage insulation and dielectric phenomena · Dielectric materials and actuators · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

GITA Autonomous College

Affiliated with Biju Patnaik University of Technology

Department of Electrical Engineering, HIT Bhubaneswar

CIPET: Institute of Petrochemicals Technology

References (35)

Show source-provided references
1. 10.1109/ICHVE.2016.780082310.1109/ICHVE.2016.7800823 ↗
2. 10.1007/978-1-4471-4549-3_210.1007/978-1-4471-4549-3_2 ↗
3. 10.1049/icp.2023.101210.1049/icp.2023.1012 ↗
4. 10.15226/sojmse.2014.0010710.15226/sojmse.2014.00107 ↗
5. 10.1007/s10904-017-0649-y10.1007/s10904-017-0649-y ↗
6. Mohamed EM, Mohammed AK, Mahues RY, et al. Comparative morphological, thermal, and mechanical characteristics of doped bentonite and dolomite natural clay fillers into high-density polyethylene. J Appl Polym Sci 2024; 141: 1–15.
7. Mohamed EM, Mohammed AK, Mahues RY, et al. Influence of MgO and ZnO as nano-additives on the mechanical, microstructural and thermal performance of high-density polyethylene. J Appl Polym Sci 2022; 139: 1–17.
8. Mohamed EM, Mohammed AK, Rehab M, et al. Effects of Al2O3 and BaO nano-additives on mechanical characteristics of high-density polyethylene. Mater Chem Phys 2021; 262: 1–11. https://doi.org/10.1016/j.matchemphys.2021.124251
9. 10.1016/j.radphyschem.2017.10.01710.1016/j.radphyschem.2017.10.017 ↗
10. 10.1177/0892705724125183510.1177/08927057241251835 ↗
11. 10.1177/0892705724125498410.1177/08927057241254984 ↗
12. 10.1177/089270571880457810.1177/0892705718804578 ↗
13. 10.1177/089270571453337210.1177/0892705714533372 ↗
14. 10.1177/089270571770448810.1177/0892705717704488 ↗
15. 10.1039/C4TA02159B10.1039/C4TA02159B ↗
16. 10.15676/ijeei.2018.10.2.610.15676/ijeei.2018.10.2.6 ↗
17. 10.3390/polym805017310.3390/polym8050173 ↗
18. Ismail NH, Mustapha M. A review of thermoplastic elastomeric nanocomposites for high voltage insulation applications. Polym Eng Sci 2018; 58(51): E36–E63. https://doi.org/10.1002/pen.24822
19. 10.1088/1757-899X/932/1/01206410.1088/1757-899X/932/1/012064 ↗
20. Amin M, Ali M. Polymer nanocomposites for high voltage outdoor insulation applications. Rev Adv Mater Sci 2015; 40: 276–294.
21. Zhou Y, Hu S, Yuan C, et al. Recyclable polypropylene-based insulation materials for HVDC cables: progress and perspective. CSEE J Power Energy Syst 2024; 10(5): 2208–2220.
22. 10.1109/MEI.2018.850771510.1109/MEI.2018.8507715 ↗
23. 10.1109/TDEI.2015.711634610.1109/TDEI.2015.7116346 ↗
24. 10.1109/TDEI.2017.00631010.1109/TDEI.2017.006310 ↗
25. 10.1109/TDEI.2017.00620410.1109/TDEI.2017.006204 ↗
26. Cardoso PM, Ueki MM, Barbosa JDV, et al. Development and characterization of LLDPE blends with different UHMWPE concentrations obtained by hot pressing. Polymers 2022; 14(3723): 1–12. https://doi.org/10.3390/polym14183723
27. 10.1002/app.5178710.1002/app.51787 ↗
28. 10.1515/epoly-2014-004310.1515/epoly-2014-0043 ↗
29. 10.1515/polyeng-2016-029510.1515/polyeng-2016-0295 ↗
30. 10.1002/cjce.2299910.1002/cjce.22999 ↗
31. 10.1002/pc.2244710.1002/pc.22447 ↗
32. 10.1080/00222348.2012.73329710.1080/00222348.2012.733297 ↗
33. 10.1021/acsnano.2c0740410.1021/acsnano.2c07404 ↗
34. 10.3390/nano806038110.3390/nano8060381 ↗
35. 10.1002/app.4118410.1002/app.41184 ↗