journal article·2026-04-24

Experimental evaluation of vibration damping performance of 3D-Printed TPU, rubber, and PLA carbon fiber layers for additive manufacturing applications

Ramadoss Yokeswaran, Jayalingam Karthikeyan, Subbiah Rathinavel, Thangarajan Sivasankaran Senthilkumar

Publisher page

Abstract

The 3D printed components face challenges in accuracy of its dimension and surface roughness due to the machine induced vibrations of the additive manufacturing systems. A polymer-based damping material offers a simple and cost-effective solution for this passive vibration of the additive manufacturing systems. In this work, a polymer-based materials such as rubber, PLA carbon fiber (PLA-CF) composite, and thermoplastic polyurethane (TPU) were fabricated via fused deposition modelling (FDM) process and their damping performance was assessed when positioned under FDM 3D printer machine. A cube specimen with a dimension of 5 × 5 × 5 cm 3 was fabricated in FDM system and its dynamic performances such as displacement, frequency, acceleration, and velocity were recorded at 10% intervals throughout its printing process. The highest dynamic response has been attained by the PLA-CF damper due to its negligible viscoelastic energy and high stiffness property resulting maximum acceleration of 1.0 m/s 2 and a displacement of 4.0 × 10 −7 m at 100% printing completion. Whereas, rubber damper achieved intermediate damping behaviour with acceleration of 1.5 m/s 2 due to its progressive viscoelastic deformation. In contrast, TPU produced a superior damping performance minimal displacement and acceleration throughout its printing process. Moreover, the cube printed under TPU damper produced smooth surface finish with surface roughness of (Ra = 1.63 μm, Rz = 20.4 μm). Overall, this work demonstrates that the TPU material shows exceptional damping performance as compared to other materials which were investigated and proves that a potential material for minimizing the vibration of FDM manufacturing system.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Cellular and Composite Structures · Aeroelasticity and Vibration Control

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

K. Ramakrishnan College of Technology

Nehru Institute of Engineering and Technology

SRM Institute of Science and Technology, Tiruchirappalli Campus

Karpagam Academy of Higher Education

References (36)

Show source-provided references
1. Ahmad NFN, Wong YH, Nik Ghazali NN. A systematic review of fused deposition modeling process parameters and their effects on printed polymer properties. Smart Struct Syst. 2022; 2: 11. https://doi.org/10.20517/ss.2022.08
2. Duran MM, Moro G, Zhang Y, et al. 3D printing of silicone and polyurethane elastomers for medical applications. Biomaterials Translational; 2023: 7. https://doi.org/10.1016/j.aime.2023.100125
3. 10.1007/s11665-022-07153-010.1007/s11665-022-07153-0 ↗
4. 10.3390/app919415410.3390/app9194154 ↗
5. 10.1016/j.matpr.2020.02.43510.1016/j.matpr.2020.02.435 ↗
6. 10.1007/s00170-024-13630-810.1007/s00170-024-13630-8 ↗
7. 10.3390/ma1405107210.3390/ma14051072 ↗
8. 10.3390/app1218932710.3390/app12189327 ↗
9. 10.3390/app15211134610.3390/app152111346 ↗
10. 10.1016/j.rcim.2018.05.01010.1016/j.rcim.2018.05.010 ↗
11. 10.3390/polym1205119610.3390/polym12051196 ↗
12. 10.1016/j.ijfatigue.2018.01.00710.1016/j.ijfatigue.2018.01.007 ↗
13. Kang W, Liu J, Xiong W, et al. Basic mechanical and fatigue properties of rubber materials and aging-related deterioration. Rubber: Adv Mater Sci 2022; 61: 587–610. https://doi.org/10.1515/rams-2022-0054
14. 10.1016/j.jmps.2024.10558210.1016/j.jmps.2024.105582 ↗
15. 10.3390/polym1709113310.3390/polym17091133 ↗
16. 10.3390/ma1422706210.3390/ma14227062 ↗
17. Jamadar I, Sharma V, Suresha B, et al. Evaluation of damping characteristics of 3D printed CF-reinforced PLA/ABS composite sandwich panels. Rom J Acoust Vib 2024; 21: 121–127.
18. 10.1016/j.addma.2020.10174910.1016/j.addma.2020.101749 ↗
19. Westphal E, Seitz H. Machine learning for intelligent analysis of 3D printing conditions. Addit Manuf 2022; 50: 102535. https://doi.org/10.1016/j.addma.2021.102
20. 10.1016/j.matdes.2025.11375210.1016/j.matdes.2025.113752 ↗
21. 10.1080/15376494.2023.224582710.1080/15376494.2023.2245827 ↗
22. 10.1007/s40964-023-00529-110.1007/s40964-023-00529-1 ↗
23. 10.1016/j.compstruct.2024.11849010.1016/j.compstruct.2024.118490 ↗
24. He F, Fan W, Khan M. Damping characterisation for 3D-printed polymeric structures with different geometric parameters. J Vib Control. 2025; 10775463251387454. https://doi.org/10.1177/10775463251387454
25. 10.3390/polym1502025710.3390/polym15020257 ↗
26. 10.1016/j.mtcomm.2022.10491210.1016/j.mtcomm.2022.104912 ↗
27. 10.3390/ma1624766910.3390/ma16247669 ↗
28. 10.1002/pc.7010710.1002/pc.70107 ↗
29. 10.1016/j.jmrt.2025.10.17010.1016/j.jmrt.2025.10.170 ↗
30. Chhabra D, Gupta RK. Optimization of FDM printing parameters for surface quality improvement of carbon-based nylon composite parts. J Nano Electron Phys 2021; 13(2): 2004.
31. 10.1016/j.matpr.2023.07.08810.1016/j.matpr.2023.07.088 ↗
32. 10.1177/0892705722109498410.1177/08927057221094984 ↗
33. 10.1177/0892705721100645910.1177/08927057211006459 ↗
34. 10.1177/0892705721105141610.1177/08927057211051416 ↗
35. 10.1007/s00170-023-11435-910.1007/s00170-023-11435-9 ↗
36. 10.1007/s11665-023-08476-210.1007/s11665-023-08476-2 ↗