journal article·2026-05-25Open access

A novel method for producing commingled high-performance thermoplastic composites via the HiPerDiF method

Ragnar M. Birgisson, Ali Kandemir, Benjamin King Sutton Woods, Ian Hamerton

Abstract

In this work, the High-Performance Discontinuous Fibre (HiPerDiF) alignment process is successfully adapted to create commingled preforms of carbon fibre and poly (ether ether ketone) (PEEK) fibres for the production of thin laminates for space applications (such as deployable satellite components). By varying the fibre-to-matrix ratio in the initial aqueous dispersion, a series of materials with different target volume fractions are fabricated and consolidated. Microstructural and mechanical characterisation reveal that the commingling strategy is highly effective, producing well-impregnated laminates with void content <1% at fibre volume fractions of up to 25%. Experimental characterisation of these composites demonstrates measured tensile modulus and failure stress exceeding 60 GPa and 740 MPa, respectively. Beyond a 25% volume fraction, performance gains tend to reach a plateau due to reductions in packing efficiency and associated increases in void content. While SEM analysis indicates a weak fibre-matrix interface, as is expected for the unsized fibres used here, the achievement of high mechanical properties and a high-quality microstructure show the basic promise of this manufacturing methodology. This work, therefore, establishes HiPerDiF commingling as a promising and scalable technique for manufacturing high-performance thermoplastic composites, identifying interfacial engineering and process refinement as the key pathways for future performance enhancements.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Epoxy Resin Curing Processes · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

University of Bristol

Funding

Engineering and Physical Sciences Research Council

References (45)

Show source-provided references
1. Krueger R, Bergan A. Advances in thermoplastic composites over three decades – a literature review. https://ntrs.nasa.gov/citations/20240005376 (1 May 2024, accessed 13 February 2025).
2. 10.1080/15583724.2019.167340610.1080/15583724.2019.1673406 ↗
3. Global high performance composites market size share 2033. https://www.custommarketinsights.com/report/high-performance-composites-market/ (accessed 27 June 2025).
4. 10.1016/j.compositesb.2023.11056010.1016/j.compositesb.2023.110560 ↗
5. Composites in the race to space. https://www.compositesworld.com/articles/composites-in-space(2) (2025 accessed 9 October 2025).
6. Leipold M, Sickinger C, Runge H. Large SAR membrane antennas with lightweight deployable booms, 2005.
7. 10.1038/s41467-024-49210-310.1038/s41467-024-49210-3 ↗
8. 10.3390/ma1211179410.3390/ma12111794 ↗
9. Veazey D Hsu T Gomez ED. Next generation high-performance carbon fiber thermoplastic composites based on polyaryletherketones. J Appl Polym Sci; 134. DOI: 10.1002/app.44441 Epub ahead of print 2017.10.1002/app.44441 ↗
10. deGroh K, Banks BA, McCarthy CE, et al. MISSE PEACE polymers atomic oxygen erosion results. 2006. https://ntrs.nasa.gov/citations/20070002707 (accessed 9 October 2025).
11. 10.1177/089270570404198810.1177/0892705704041988 ↗
12. 10.1016/0266-3538(95)00061-510.1016/0266-3538(95)00061-5 ↗
13. 10.1177/00219983990330080610.1177/002199839903300806 ↗
14. 10.1007/s12289-025-01952-110.1007/s12289-025-01952-1 ↗
15. 10.1016/j.jclepro.2021.12715810.1016/j.jclepro.2021.127158 ↗
16. Bachmann J, Hidalgo C, Bricout S. Environmental analysis of innovative sustainable composites with potential use in aviation sector—A life cycle assessment review. Sci China Technol Sci; 60. https://doi.org/10.1007/s11431-016-9094-y, Epub ahead of print 3 August 2017.
17. Yu H, Potter K. Method and apparatus for aligning discontinuous fibres. https://patentscope.wipo.int/search/en/WO2014170637 (2014, accessed 24 June 2025).
18. 10.1016/j.compositesa.2014.06.00510.1016/j.compositesa.2014.06.005 ↗
19. Yarlagadda S, Deitzel J, Heider D, et al. Tailorable universal feedstock for forming (TUFF): overview and performance. The Society for the Advancement of Material and Process Engineering (SAMPE). https://doi.org/10.33599/nasampe/s.19.1605, Epub ahead of print 20 May 2019.
20. 10.1016/j.compscitech.2024.11064910.1016/j.compscitech.2024.110649 ↗
21. 10.1016/j.compositesb.2024.11180110.1016/j.compositesb.2024.111801 ↗
22. 10.1016/j.compositesb.2023.11090310.1016/j.compositesb.2023.110903 ↗
23. 10.1016/j.compositesa.2024.10868310.1016/j.compositesa.2024.108683 ↗
24. Kaliyath Parambil N Chen B Gillespie JJ. Fatigue performance of highly aligned short fiber Im7/Lm-Paek thermoplastic composites. In: Proceedings of the American society for composites-thirty-eighth technical conference Woburn Massachusetts USA. 2023. Epub ahead of print 18 September 2023. https://doi.org/10.12783/asc38/3664210.12783/asc38/36642 ↗
25. Evonik Operations GmbH. VESTAKEEP® 2500 G high purity 2025. https://www.ulprospector.com/Plastics/en/datasheet/434547/vestakeep-2500-g-high-purity
26. Toho Tenax America Inc. TENAX® chopped carbon fibers 2011. https://materials.ulprospector.com/en/profile/default?e=268586
27. 10.3390/ma1408188510.3390/ma14081885 ↗
28. 10.1016/j.compositesa.2017.11.00510.1016/j.compositesa.2017.11.005 ↗
29. 10.3390/ma1307154410.3390/ma13071544 ↗
30. 10.1002/pc.2680110.1002/pc.26801 ↗
31. 10.1016/j.compositesa.2022.10694310.1016/j.compositesa.2022.106943 ↗
32. 10.1177/002199831985541910.1177/0021998319855419 ↗
33. 10.1016/j.compositesa.2019.03.03510.1016/j.compositesa.2019.03.035 ↗
34. 10.1002/pen.1030410.1002/pen.10304 ↗
35. 10.3139/217.168110.3139/217.1681 ↗
36. 10.1016/j.compositesa.2023.10765110.1016/j.compositesa.2023.107651 ↗
37. 10.1016/j.polymdegradstab.2019.05.02610.1016/j.polymdegradstab.2019.05.026 ↗
38. 10.1016/j.compositesa.2023.10789810.1016/j.compositesa.2023.107898 ↗
39. Mechanical testing of advanced fibre composites. https://www.sciencedirect.com/book/edited-volume/9781855733121/mechanical-testing-of-advanced-fibre-composites (accessed 4 March 2026).
40. 10.1016/j.compscitech.2025.11130110.1016/j.compscitech.2025.111301 ↗
41. 10.1016/j.compscitech.2024.11089210.1016/j.compscitech.2024.110892 ↗
42. 10.1016/j.compscitech.2024.11074110.1016/j.compscitech.2024.110741 ↗
43. 10.1007/BF0034990110.1007/BF00349901 ↗
44. Victrex Manufacturing Limited. VictrexTM peek polymer 450CA30 2025. https://www.victrex.com/en/downloads/datasheets/victrex-peek-450ca30
45. 3dxtech. Technical data sheet: CarbonXTM 20% carbon fiber PEEK 3D printing filament, 2025. https://visionminer.com/products/carbonx%E2%84%A2-peek-cf20?srsltid=AfmBOoqHRmprXciyledmX3b-a-Snv2s_j-FGvLKOZT_vrFomyK3LDv-v