Laser welding of HDPE/CNT to PP; an investigation on thermal and mechanical properties
Source abstract
Abstract
The aim of this study is to develop a hybrid polymer structure based on polypropylene (PP) and high-density polyethylene (HDPE) using laser welding. To overcome the challenge posed by PP’s higher melting temperature, carbon nanotube (CNT) nanoparticles were incorporated into HDPE via 3D printing, aiming to enhance its thermal and mechanical properties and minimize the melting temperature differential between the two polymers. The resulting HDPE/CNT nanocomposite was then welded to PP using a pulsed laser. The performance of the nanocomposites and the welded joints was evaluated through tensile and bending testing, supplemented by SEM and DSC analyses. The effects of laser power, welding speed, and pulse frequency on weld bending strength and elastic modulus were modeled using Response Surface Methodology (RSM). The results indicated that an increase in the laser power from 30 to 40 W improved the elastic modulus by about 18%, though further raising it to 50 W caused a reduction of about 5%. At the same time, bending strength steadily increased across the 30–50 W range, achieving a total improvement of 24.5%. Moreover, increasing the laser power to 40 W along with raising the welding speed to 20 mm/s reduces microstructural defects, which correspondingly enhances the elastic modulus and bending strength to 720 MPa and 70 MPa, respectively. Optimal joint performance, maximizing both bending strength and elastic modulus simultaneously, was achieved at a laser power of 48 W, a welding speed of 20 mm/s, and a pulse frequency of 35 Hz.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Laser Material Processing Techniques · Additive Manufacturing and 3D Printing Technologies · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Jazan University
Funding
Deanship of Graduate Studies and Scientific Research · Jazan University
References (32)
Show source-provided references
1. 10.1007/s10965-023-03440-z10.1007/s10965-023-03440-z ↗
2. 10.1177/0892705723122282010.1177/08927057231222820 ↗
3. 10.1177/0892705722109666210.1177/08927057221096662 ↗
4. 10.3390/polym1305067510.3390/polym13050675 ↗
5. 10.1177/0892705725136453810.1177/08927057251364538 ↗
6. 10.1002/app.5041810.1002/app.50418 ↗
7. 10.3390/polym1313205610.3390/polym13132056 ↗
8. 10.1177/0892705721101162110.1177/08927057211011621 ↗
9. 10.1371/journal.pone.032245610.1371/journal.pone.0322456 ↗
10. 10.1007/s40194-024-01693-w10.1007/s40194-024-01693-w ↗
11. 10.1016/j.mtcomm.2022.10500910.1016/j.mtcomm.2022.105009 ↗
12. 10.1002/pen.2631310.1002/pen.26313 ↗
13. 10.3390/polym1202040210.3390/polym12020402 ↗
14. Cam G, Kocak M, dos Santos JF. Developments in laser welding of metallic materials and characterization of the joints. Weld World 1999; 43(2): 13–26.
15. Dos Santos J, Cam G, Torster F, et al. Properties of power beam welded steels, Al- and Ti-alloys: significance of strength mismatch. Weld World 2000; 44(6): 42–64.
16. Von Strombeck A Çam G dos Santos JF et al. A comparison between microstructure properties and toughness behavior of power beam and friction stir welds in Al-Alloys. In: Proc. of the TMS 2001 Annual Meeting Aluminum Automotive and Joining New Orleans Louisiana USA February 12-14 2001 eds: S.K. Das J.G. Kaufman and T.J. Lienert: TMS Warrendale PA USA 2001 pp. 249–264.
17. 10.1016/j.jmapro.2018.10.00510.1016/j.jmapro.2018.10.005 ↗
18. 10.1007/s00170-016-9861-010.1007/s00170-016-9861-0 ↗
19. 10.1016/j.promfg.2020.04.29710.1016/j.promfg.2020.04.297 ↗
20. 10.1016/j.optlastec.2020.10672610.1016/j.optlastec.2020.106726 ↗
21. 10.30684/etj.v38i5A.36810.30684/etj.v38i5A.368 ↗
22. 10.1088/1742-6596/1426/1/01204510.1088/1742-6596/1426/1/012045 ↗
23. 10.1016/j.compstruct.2022.11524710.1016/j.compstruct.2022.115247 ↗
24. 10.1002/app.3900010.1002/app.39000 ↗
25. 10.1002/app.4663810.1002/app.46638 ↗
26. 10.1080/1023666X.2018.145502510.1080/1023666X.2018.1455025 ↗
27. 10.1016/j.polymer.2022.12478410.1016/j.polymer.2022.124784 ↗
28. 10.3390/c702003810.3390/c7020038 ↗
29. 10.1177/009524432093397910.1177/0095244320933979 ↗
30. 10.1177/089270571666251510.1177/0892705716662515 ↗
31. 10.1007/s11665-021-06235-910.1007/s11665-021-06235-9 ↗
32. 10.1080/01694243.2021.191790410.1080/01694243.2021.1917904 ↗