journal article·2026-06-08

Development of miscanthus fiber-reinforced polypropylene composite for application in motor vehicle headlamp casing

Uchendu Onwusoronye Onwurah, Christopher Chukwutoo Ihueze, Ndubuisi Celestine Okoli, Christian Emeka Okafor, Jubrilla Abduralrahman

Publisher page

Abstract

The study is aimed at the development of miscanthus fiber-reinforced polypropylene composites for production of motor vehicle headlamp casings. Miscanthus fibers were extracted, alkali-treated, washed, dried, pulverized, and sieved to a fine particle size. The miscanthus fiber-reinforced polypropylene composites were prepared via an injection moulding process at fiber contents of 5 wt% to 35 wt%, an interval of 5%. The tensile, flexural, and impact tests on the composite samples were carried out in accordance to ASTM D638, ASTM D790, and ISO 179, respectively. Thermal stability analysis and steady-state structural analysis were carried out on the composite material in order to assess the integrity of the material for headlamp casing application. The results showed that the optimum tensile, impact, and flexural strengths of 83.75 MPa, 10.877 kJ/m 2 , and 39.2 MPa of the composites, respectively, occurred at 25 wt% fiber loading. Great improvements were made on the mechanical properties of the composites due to reinforcement with miscanthus fiber when compared to the unreinforced polypropylene. The thermal stability analysis and structural analysis showed the suitability of the new composite material in its service environment. This study concludes that miscanthus fiber-reinforced polypropylene is a valuable material for the production of motor vehicle headlamp casings.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Tribology and Wear Analysis · Hygrothermal properties of building materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Nnamdi Azikiwe University

Durban University of Technology

References (75)

Show source-provided references
1. 10.1016/j.aiepr.2022.06.00110.1016/j.aiepr.2022.06.001 ↗
2. 10.1016/j.rineng.2021.10026310.1016/j.rineng.2021.100263 ↗
3. 10.12911/22998993/16475710.12911/22998993/164757 ↗
4. 10.1080/15440478.2018.144108810.1080/15440478.2018.1441088 ↗
5. 10.1016/j.matpr.2021.05.32810.1016/j.matpr.2021.05.328 ↗
6. 10.1016/j.rinma.2024.10053410.1016/j.rinma.2024.100534 ↗
7. 10.3390/polym1502037110.3390/polym15020371 ↗
8. 10.1177/0892705721101087810.1177/08927057211010878 ↗
9. 10.1016/j.aej.2021.09.06110.1016/j.aej.2021.09.061 ↗
10. 10.1080/15440478.2024.233269810.1080/15440478.2024.2332698 ↗
11. 10.3390/ma1722551910.3390/ma17225519 ↗
12. 10.1155/2021/664102910.1155/2021/6641029 ↗
13. 10.3389/fmats.2019.0001510.3389/fmats.2019.00015 ↗
14. 10.3390/fib806003710.3390/fib8060037 ↗
15. 10.1051/matecconf/20171090100310.1051/matecconf/201710901003 ↗
16. Laongdaw T, Achim F, Suchart S. Polypropylene/maleic anhydride grafted polypropylene (MAgPP)/coconut fiber composites. Adv Mech Eng 2016; 8: 1–9. https://doi.org/10.1177/1687814016645446
17. 10.4236/nr.2016.7301110.4236/nr.2016.73011 ↗
18. 10.1016/j.matpr.2022.04.27610.1016/j.matpr.2022.04.276 ↗
19. 10.1016/j.carbpol.2014.03.03910.1016/j.carbpol.2014.03.039 ↗
20. 10.1007/s12588-017-9179-210.1007/s12588-017-9179-2 ↗
21. 10.1016/j.compstruct.2017.08.06510.1016/j.compstruct.2017.08.065 ↗
22. 10.1016/j.matpr.2020.07.38610.1016/j.matpr.2020.07.386 ↗
23. 10.3390/jcs702007210.3390/jcs7020072 ↗
24. 10.1177/00405175020720080310.1177/004051750207200803 ↗
25. 10.1002/pc.2604510.1002/pc.26045 ↗
26. 10.1007/s00170-019-03638-w10.1007/s00170-019-03638-w ↗
27. 10.1016/j.matpr.2020.09.77710.1016/j.matpr.2020.09.777 ↗
28. 10.1177/004051750606339310.1177/0040517506063393 ↗
29. Ravi Kumar V, Narayana RL, Srinivas C. Analysis of natural fiber composite leaf spring. Int J Latest Trends Eng Technol 2013; 3: 182–191.
30. 10.1016/j.matpr.2020.10.07310.1016/j.matpr.2020.10.073 ↗
31. 10.1590/1516-1439.36251410.1590/1516-1439.362514 ↗
32. 10.3390/app1308512610.3390/app13085126 ↗
33. 10.1016/S1003-6326(14)63305-710.1016/S1003-6326(14)63305-7 ↗
34. 10.1016/j.jer.2024.02.01710.1016/j.jer.2024.02.017 ↗
35. 10.1016/j.jmrt.2023.06.01910.1016/j.jmrt.2023.06.019 ↗
36. 10.1016/j.rser.2014.08.02810.1016/j.rser.2014.08.028 ↗
37. Khan RM, Mushtag A. Material selection and manufacturing of halogen-based headlamp for two-wheeler vehicle technologies. Iran J Chem Chem Eng 2022; 41: 88–108. https://doi.org/10.30492/IJCCE.2021.121678.3976
38. Akinsanmi O, Ganjang AD, Ezea HU. Design and development of an automatic automobile headlight switching system. Int J Eng Appl Sci 2015; 2: 107–112.
39. 10.14257/ijca.2016.9.5.2510.14257/ijca.2016.9.5.25 ↗
40. Mraz K, Bartuli E, Kroulikova T, et al. Case study of liquid cooling of automotive headlights with hollow fiber heat exchanger. Case Stud Therm Eng 2018; 20: 101689. https://doi.org/10.1016/j.csite.2021.101689
41. 10.22214/ijraset.2020.3145310.22214/ijraset.2020.31453 ↗
42. Rajakumar PT, Raguraman D, Isaac JS, et al. Mechanical properties of polymer composite reinforced with alkaline-treated natural fibre. Adv Polym Technol 2022: 1458547. https://doi.org/10.1155/2022/1458547
43. 10.1016/j.compositesb.2024.11148810.1016/j.compositesb.2024.111488 ↗
44. 10.4236/aces.2018.8401510.4236/aces.2018.84015 ↗
45. 10.1177/002199831350899610.1177/0021998313508996 ↗
46. Reddy SP, Reddy AC. Tensile and flexural strength of okra fiber reinforced polymer composites. Int J Eng Manag Res 2016; 6: 491–495.
47. 10.3390/polym1415306310.3390/polym14153063 ↗
48. 10.1007/s12008-023-01695-w10.1007/s12008-023-01695-w ↗
49. 10.1063/5.024172710.1063/5.0241727 ↗
50. 10.1051/matecconf/20182440102310.1051/matecconf/201824401023 ↗
51. Rao YSA, Khan S, Kumara S, et al. Design, static structural and a steady state thermal analysis of aluminium composite piston. Int J Sci Res Eng Manag 2024; 8: 1–7. https://doi.org/10.55041/IJSREM30417
52. Ihueze CC, Okoli NC, Onwurah UO, et al. The effect of chemical treatments on the mechanical properties of miscanthus X gigantheus fibre. J Eng Appl Sci 2022; 21: 868–878.
53. 10.1515/978311064733410.1515/9783110647334 ↗
54. 10.1016/j.nanoso.2024.10132310.1016/j.nanoso.2024.101323 ↗
55. Al Mahmood A, Mobin A, Morshed R, et al. Characterization of glass fiber reinforced polymer composite prepared by hand lay-up method. Am J Biosci Bioeng 2017; 5: 8–11. https://doi.org/10.11648/j.bio.20170501.12
56. 10.15282/jmes.10.1.2016.16.018410.15282/jmes.10.1.2016.16.0184 ↗
57. 10.1016/j.matpr.2017.11.10510.1016/j.matpr.2017.11.105 ↗
58. Ramanaiah K, Prasad AVR, Reddy KHC. Effect of fiber loading on mechanical properties of borassus seed shoot fiber reinforced polyester composites. J Mater Environ Sci 2012; 3: 374–378.
59. 10.1016/j.jksues.2015.10.00410.1016/j.jksues.2015.10.004 ↗
60. 10.1016/j.proche.2016.03.10210.1016/j.proche.2016.03.102 ↗
61. 10.1016/B978-0-12-824056-4.00016-910.1016/B978-0-12-824056-4.00016-9 ↗
62. 10.3390/polym1208183310.3390/polym12081833 ↗
63. 10.1155/2016/423597510.1155/2016/4235975 ↗
64. 10.1177/089270571142865910.1177/0892705711428659 ↗
65. Sai PHV, ST, Bhaumik A, Danappanavar B, et al. Mechanical characterization of corn fiber-polypropylene reinforced composites at different fiber weight fractions enriched using maleic anhydride grafted polypropylene. Solid State Technol 2020; 63: 2521–2527.
66. 10.1177/0021998325132896210.1177/00219983251328962 ↗
67. 10.3390/polym1504090010.3390/polym15040900 ↗
68. 10.15282/jmes.12.4.2018.15.036110.15282/jmes.12.4.2018.15.0361 ↗
69. 10.1515/ntrev-2024-000510.1515/ntrev-2024-0005 ↗
70. 10.1016/j.biombioe.2025.10785310.1016/j.biombioe.2025.107853 ↗
71. 10.1007/s42824-024-00105-010.1007/s42824-024-00105-0 ↗
72. 10.1007/s10973-022-11927-y10.1007/s10973-022-11927-y ↗
73. Yeo AKK, Bi BEB, Koffi PME, et al. Polypropylene characterization by differential scanning calorimetry (DSC). Int J Innovat Appl Stud 2023; 40: 12–19.
74. 10.1080/15440478.2023.228204710.1080/15440478.2023.2282047 ↗
75. 10.1007/s10965-024-04016-110.1007/s10965-024-04016-1 ↗