Thermal and mechanical behavior of recycled polypropylene (rPP) composites with glass fiber reinforcement and mAlN thermal additives
Source abstract
Abstract
Global evolution towards the electric vehicles (EVs) has increased the usage demand for lightweight, cost effective and sustainable materials, to improve the energy efficiency and extend driving range. Recycled polymers offer a reduced carbon footprint, while retaining the mechanical strength of non-structural EV battery housings, to support the circular economic goals in the automotive sector. In this work, the thermoplastic material is compounded by melt mixing recycled polypropylene (rPP) with glass fiber (GF) and varying proportion of surface modified Aluminum nitride (mAlN) as thermal fillers to overpower the low thermal conductivity of rPP. Similarly, GF reinforcement is used to improve its stiffness and mechanical stability lost during the recycling process. The mechanical characterization study is carried out on the prepared composite material as per ASTM standards. The addition of GF has enhanced the stiffness and strength of rPP without significantly reducing its ductility. The thermal conductivity of the composite is observed to gradually increase with the filler concentration. It is important to note that the composites with increased percentages of mAlN possessed thermal conductivity of 2.132 W/mK. Also, the TGA analysis proved that addition of mAlN slowed the thermal degradation process, enhancing its thermal stability at high temperatures. The results reveal that the hybrid reinforcement of rPP with mAlN and GF helps in effectively balancing the mechanical and thermal behavior. In addition to the performance improvement, the usage of rPP also helps in reducing the waste and facilitating sustainability.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Thermal properties of materials · Natural Fiber Reinforced Composites · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Indian Institute of Information Technology Design and Manufacturing
References (60)
Show source-provided references
1. 10.1016/j.ecolecon.2005.06.00810.1016/j.ecolecon.2005.06.008 ↗
2. 10.1177/0892705723122282010.1177/08927057231222820 ↗
3. 10.1016/j.compositesa.2005.05.04810.1016/j.compositesa.2005.05.048 ↗
4. 10.1016/j.compstruct.2013.12.00810.1016/j.compstruct.2013.12.008 ↗
5. 10.1016/j.compstruct.2006.04.09010.1016/j.compstruct.2006.04.090 ↗
6. 10.1016/S0263-8223(02)00005-310.1016/S0263-8223(02)00005-3 ↗
7. 10.1080/09243046.2024.234823710.1080/09243046.2024.2348237 ↗
8. 10.1016/j.conbuildmat.2016.03.16210.1016/j.conbuildmat.2016.03.162 ↗
9. 10.1088/1742-6596/1174/1/01200510.1088/1742-6596/1174/1/012005 ↗
10. 10.1016/j.jclepro.2022.13098310.1016/j.jclepro.2022.130983 ↗
11. 10.1007/s43538-024-00333-710.1007/s43538-024-00333-7 ↗
12. 10.1016/j.energy.2016.09.00810.1016/j.energy.2016.09.008 ↗
13. 10.1016/j.trd.2016.05.00910.1016/j.trd.2016.05.009 ↗
14. 10.1016/B978-0-444-59513-3.00010-810.1016/B978-0-444-59513-3.00010-8 ↗
15. 10.3390/en1722563410.3390/en17225634 ↗
16. 10.3390/polym1721289710.3390/polym17212897 ↗
17. 10.1007/s12239-015-0092-410.1007/s12239-015-0092-4 ↗
18. 10.4028/www.scientific.net/KEM.594-595.50310.4028/www.scientific.net/KEM.594-595.503 ↗
19. 10.1177/089270571142865910.1177/0892705711428659 ↗
20. 10.1177/089270571453337110.1177/0892705714533371 ↗
21. 10.1080/09506608.2019.158218010.1080/09506608.2019.1582180 ↗
22. 10.1002/pc.2570310.1002/pc.25703 ↗
23. 10.1177/089270571456312910.1177/0892705714563129 ↗
24. 10.1177/089270571142734510.1177/0892705711427345 ↗
25. 10.1177/089270571881553310.1177/0892705718815533 ↗
26. 10.1007/978-3-030-16962-6_6310.1007/978-3-030-16962-6_63 ↗
27. 10.1080/25740881.2024.233069910.1080/25740881.2024.2330699 ↗
28. 10.1177/0892705725132518210.1177/08927057251325182 ↗
29. Abbas M, Septevani AA, Yurid F, et al. Thermal interface polymer-based composites materials: a critical review. Multiscale multidiscip. Model. Exp. Des 2025; 8(3): 1–25.
30. Kurtlu AM, Dağ ÖY, Tuna S. Improved thermal conductivity, mechanical, and flammability properties of polypropylene/hexagonal boron nitride/silicon carbide nanocomposites using a titanate-based coupling agent. J Thermoplast Compos Mater 2026: 08927057261439029. https://doi.org/10.1177/08927057261439029
31. 10.1177/089270572092512510.1177/0892705720925125 ↗
32. 10.1007/s41127-024-00081-x10.1007/s41127-024-00081-x ↗
33. 10.1016/j.jallcom.2023.17288210.1016/j.jallcom.2023.172882 ↗
34. 10.1016/j.carbon.2007.03.02910.1016/j.carbon.2007.03.029 ↗
35. 10.3390/polym1212285110.3390/polym12122851 ↗
36. 10.1007/s13726-022-01076-210.1007/s13726-022-01076-2 ↗
37. 10.1016/j.surfin.2022.10205510.1016/j.surfin.2022.102055 ↗
38. 10.1177/089270571141409410.1177/0892705711414094 ↗
39. 10.1177/09673911050130030510.1177/096739110501300305 ↗
40. Kumar D, Gautam V, Srivastav A. An investigation on thermo-mechanical behaviour of injection moulded PP-Compounds. EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy 2023; 04: 2614–2619. https://doi.org/10.5109/7160917
41. 10.1016/j.cirpj.2021.01.00210.1016/j.cirpj.2021.01.002 ↗
42. Ranjan N, Singh R, Ahuja IPS, et al. Fabrication of PLA-HAp-CS based biocompatible and biodegradable feedstock filament using twin screw extrusion. Additive Manufacturing of Emerging Materials 2018: 325–345.
43. 10.1177/095441191985281110.1177/0954411919852811 ↗
44. 10.1007/s42452-020-1936-810.1007/s42452-020-1936-8 ↗
45. 10.1016/B978-0-323-86011-6.00009-X10.1016/B978-0-323-86011-6.00009-X ↗
46. 10.1177/089270571561040710.1177/0892705715610407 ↗
47. 10.3390/polym1711155610.3390/polym17111556 ↗
48. Mwanzia MN. Mechanical and optical properties of thermoplastic composite from recycled polypropylene reinforced with wood fillers (doctoral dissertation, COPAS-JKUAT), 2025.
49. 10.18596/jotcsa.117801910.18596/jotcsa.1178019 ↗
50. Schyns ZOG, Shaver MP. Mechanical recycling of packaging plastics: A Review 2021; 42: 1–27. https://doi.org/10.1002/marc.202000415
51. 10.1016/j.resconrec.2005.06.00110.1016/j.resconrec.2005.06.001 ↗
52. 10.1016/j.ceramint.2022.07.13710.1016/j.ceramint.2022.07.137 ↗
53. 10.1016/j.ceramint.2025.02.23510.1016/j.ceramint.2025.02.235 ↗
54. 10.1080/14658011.2015.113678010.1080/14658011.2015.1136780 ↗
55. 10.1063/5.016025610.1063/5.0160256 ↗
56. ASTM D790-17. Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials. West Conshohocken, PA: ASTM International, 2017, pp. 1–12.
57. 10.1021/acsapm.5c0132010.1021/acsapm.5c01320 ↗
58. 10.3390/polym1101014810.3390/polym11010148 ↗
59. 10.1177/089270571351329510.1177/0892705713513295 ↗
60. Zhang. Identified weak adhesion between hydrophobic polypropylene matrix and glass fibers as the major limitation reducing mechanical performance of PP/LGF composites, 2015.