journal article·2026-06-12

From waste to structural performance: Mechanical, thermal, and moisture stability of feather–graphite reinforced polylactic acid

Elumalai Vengadesan, Hrishikesh Dutta, Gorrepotu Surya Rao, T Arunkumar

Publisher page

Abstract

Agricultural waste is utilized as filler to mitigate manufacturing constraints and brittleness in polylactic acid (PLA). However, the hydrophilic nature of fillers leads to moisture absorption and swelling, diminishing material’s strength. Thus, this study investigates the impact of hydrophobic fillers such as waste feather (WF) and graphite powder as reinforcements to enhance mechanical properties and reduce moisture absorption in PLA. Three hybrid PLA-composites (HPLAC) are produced, with varying WF and graphite percentages: HPLAC1 (15% WF, 5% graphite), HPLAC2 (10% WF, 10% graphite), and HPLAC3 (5% WF, 15% graphite). HPLAC3 demonstrates higher tensile strength (45 ± 0.7 MPa) and flexural strength (124 ± 2.3 MPa), exceeding pure PLA by 181.3% and 191.7%, respectively. The addition of WF and graphite enhanced compression strength and hardness, while higher graphite content reduced impact strength due to its lower density and higher stiffness. The glass transition and melting temperatures are increased to 64.4°C and 178.5°C corresponding to an increased crystallinity from 16.6% (PLA) to 35.5% (HPLAC2). Furthermore, HPLAC2 has a 38.6% lower water absorption than pure PLA, showing that the HPLACs with WF and graphite have higher mechanical properties and reduced water absorption than PLA. Consequently, they can provide a wide range of applications across several sectors, setting up a balance between performance, sustainability, and cost-effectiveness.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · biodegradable polymer synthesis and properties · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Chennai Institute of Technology

School of Engineering, University of Galway

References (54)

Show source-provided references
1. 10.1016/j.jclepro.2022.13437310.1016/j.jclepro.2022.134373 ↗
2. 10.1201/b1906210.1201/b19062 ↗
3. 10.1007/s10853-019-03990-y10.1007/s10853-019-03990-y ↗
4. 10.1016/j.ijbiomac.2023.12370310.1016/j.ijbiomac.2023.123703 ↗
5. 10.3390/polym1308132610.3390/polym13081326 ↗
6. 10.1016/j.jiec.2024.02.01210.1016/j.jiec.2024.02.012 ↗
7. 10.1177/0892705725136102010.1177/08927057251361020 ↗
8. 10.1007/s10965-018-1494-610.1007/s10965-018-1494-6 ↗
9. 10.1016/j.compositesb.2018.08.06810.1016/j.compositesb.2018.08.068 ↗
10. 10.1007/s10965-012-9859-810.1007/s10965-012-9859-8 ↗
11. 10.1002/pat.448810.1002/pat.4488 ↗
12. 10.1016/j.compositesb.2017.11.04810.1016/j.compositesb.2017.11.048 ↗
13. 10.1016/j.compositesb.2019.10753510.1016/j.compositesb.2019.107535 ↗
14. 10.1177/089270572094537110.1177/0892705720945371 ↗
15. Kumar R, Rakesh PK, Sreehari D, et al. Preparation, characterisation and properties of green composites from Pinus roxburghii fibre. Proc. Inst. Mech. Eng. L J. Mater. Des. Appl. 2024; 238(8): 1457–1466. https://doi.org/10.1177/14644207231225068
16. 10.1108/RPJ-06-2018-014910.1108/RPJ-06-2018-0149 ↗
17. 10.1080/15440478.2020.187061610.1080/15440478.2020.1870616 ↗
18. 10.1007/s10965-019-1710-z10.1007/s10965-019-1710-z ↗
19. Singh JIP, Singh S, Dhawan V. Influence of fiber volume fraction and curing temperature on mechanical properties of jute/PLA green composites. Polym Polym Compos 2019; 28(4): 273–284. https://doi.org/10.1177/0967391119872875
20. 10.1016/j.rser.2021.11205410.1016/j.rser.2021.112054 ↗
21. 10.1177/089270571988601010.1177/0892705719886010 ↗
22. 10.1177/0892705725132216510.1177/08927057251322165 ↗
23. 10.1007/s10965-019-1991-210.1007/s10965-019-1991-2 ↗
24. 10.1002/pc.2773310.1002/pc.27733 ↗
25. 10.1007/s12221-025-00848-w10.1007/s12221-025-00848-w ↗
26. 10.1007/s42452-025-06583-410.1007/s42452-025-06583-4 ↗
27. 10.1016/j.rser.2024.11439410.1016/j.rser.2024.114394 ↗
28. 10.1016/j.compositesb.2009.04.01110.1016/j.compositesb.2009.04.011 ↗
29. 10.1016/j.jcomc.2022.10032010.1016/j.jcomc.2022.100320 ↗
30. 10.1002/app.4401310.1002/app.44013 ↗
31. 10.1080/15440478.2019.167521910.1080/15440478.2019.1675219 ↗
32. Dhanunjayarao B, Sanivada UK, Swamy Naidu N, et al. Effect of graphite particulate on mechanical characterization of hybrid polymer composites. J Ind Text 2021; 51(2): 2594S–2615S. https://doi.org/10.1177/15280837211010670
33. 10.1002/app.2541310.1002/app.25413 ↗
34. Alam S, Mina MF, Rahman MJ, et al. Effects of micrometre-sized graphite flake to reinforce the performances of poly(lactic acid) thermoplastic biocomposites. Polym Polym Compos 2018; 27(1): 20–32. https://doi.org/10.1177/0967391118811218
35. Avci A, Eker AA, Bodur MS, et al. An experimental investigation on the thermal and mechanical characterization of boron/flax/PLA sustainable composite. Proc Inst Mech Eng Part L J Mater Des Appl 2022; 236(12): 2561–2573. https://doi.org/10.1177/14644207221121984
36. Govindan P, Arul Jeya Kumar A, Lakshmankumar A. Wear and morphological analysis on Basalt/Sisal hybrid fiber reinforced poly lactic acid composites. Proc Inst Mech Eng Part L J. Mater. Des. Appl 2022; 236(5): 1053–1066. https://doi.org/10.1177/14644207211067657
37. Chaudhary V Ahlawat C Dwivedi SP et al. Physical mechanical and thermal analysis of banana/kenaf fiber with coconut/walnut shell filler based-PLA composites. J Thermoplast Compos Mater 2026 Epub ahead of print. https://doi.org/10.1177/0892705726144811210.1177/08927057261448112 ↗
38. 10.1177/0892705722110341310.1177/08927057221103413 ↗
39. 10.1177/0892705724128812510.1177/08927057241288125 ↗
40. 10.1080/09243046.2019.170967910.1080/09243046.2019.1709679 ↗
41. 10.3390/polym1010105610.3390/polym10101056 ↗
42. 10.3390/polym1206125010.3390/polym12061250 ↗
43. 10.1016/j.matpr.2021.05.39210.1016/j.matpr.2021.05.392 ↗
44. 10.1177/089270571881189510.1177/0892705718811895 ↗
45. 10.1007/s12221-023-00034-w10.1007/s12221-023-00034-w ↗
46. 10.3390/pr1111311910.3390/pr11113119 ↗
47. 10.1016/j.jmbbm.2021.10433110.1016/j.jmbbm.2021.104331 ↗
48. 10.1177/089270571984724410.1177/0892705719847244 ↗
49. 10.1007/s12221-023-00424-010.1007/s12221-023-00424-0 ↗
50. 10.1016/j.matdes.2014.02.06610.1016/j.matdes.2014.02.066 ↗
51. 10.1016/j.ceramint.2022.07.11710.1016/j.ceramint.2022.07.117 ↗
52. 10.1016/j.susmat.2024.e0086510.1016/j.susmat.2024.e00865 ↗
53. Esparza Y, Ullah A, Wu J. Preparation and characterization of graphite oxide nano‐reinforced biocomposites from chicken feather keratin. J. Chem. Technol 2017; 92(8): 2023–2031. https://doi.org/10.1002/jctb.5196
54. 10.3390/polym1103054910.3390/polym11030549 ↗