Effects of multi-waveguide configurations in a cylindrical resonant cavity on temperature uniformity during tire microwave vulcanization
Source abstract
Abstract
This study focuses on the non-uniform temperature distribution during tire microwave vulcanization and establishes a multiphysics coupled model of microwave heating in a cylindrical resonant cavity to systematically investigate the effects of waveguide arrangement, rotation angle, waveguide number, and spatial configuration on temperature-field distribution and microwave utilization efficiency. The results indicate that, for the inner-waveguide configuration, the primary heating regions are concentrated in the tread and bead areas, while variations in the number of inner waveguides have little influence on the heating region. The combined inner–outer waveguide arrangement significantly improves the temperature uniformity in the tread region, and changes in the outer-waveguide position do not alter the main heating area of the tire. For the single-waveguide structure, the 45° configuration exhibits the highest microwave utilization efficiency, with the minimum S11 value reaching −20.327 dB and the fastest heating rate. In contrast, the 90° configuration achieves the most uniform temperature distribution and the optimal heating uniformity. Compared with dual- and four-waveguide configurations, the combined three-waveguide side–upper arrangement demonstrates superior electric-field uniformity and overall heating performance, in which the rotation angle of the upper waveguide significantly affects the tire temperature distribution, and the optimal temperature uniformity is obtained at 90°. The present study systematically reveals the coupling relationship between multi-waveguide configuration parameters and tire temperature-field evolution, and provides theoretical guidance for the structural optimization and uniform microwave heating design of large and complex rubber products.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microwave-Assisted Synthesis and Applications · Synthesis and properties of polymers · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Qingdao University of Science and Technology
References (36)
Show source-provided references
1. Chen H, Li T, Zhang W, et al. Study on vulcanization process of rubber by combination of microwave and traditional heating. China Rubber Indu 2016; 63(05): 304–307.
2. Liang Y. Study on temperature field in microwave vulcanization process of rubber. Qingdao, China: Qingdao University of Science and Technology, 2016.
3. Zhang J, Shan J, Zhu L,et al. Design and experiment of a high-order mode microwave heating device for carbon fiber. Sci Technol Eng 2020; 20(18): 7350–7355.
4. Bai XB. Design of control system for industrial microwave heating equipment. Chengdu, China: University of Electronic Science and Technology of China, 2015.
5. 10.1016/j.foodhyd.2013.12.00110.1016/j.foodhyd.2013.12.001 ↗
6. 10.1016/j.ijheatmasstransfer.2008.04.00310.1016/j.ijheatmasstransfer.2008.04.003 ↗
7. 10.3144/expresspolymlett.2022.2310.3144/expresspolymlett.2022.23 ↗
8. 10.1515/revce-2013-003310.1515/revce-2013-0033 ↗
9. 10.1016/j.ces.2018.05.03610.1016/j.ces.2018.05.036 ↗
10. Ismayilova P, Khankishiyeva R, Azizova A, et al. Engineering hybrid crosslink networks in nitrile butadiene rubber via polymeric plasticizer-assisted thermoradiation vulcanization [J]. J Thermoplast Compos Mater. 2026; 39: 08927057261443176. https://doi.org/10.1177/08927057261443176
11. 10.1007/s00289-025-06055-010.1007/s00289-025-06055-0 ↗
12. 10.1080/10420150.2025.256252210.1080/10420150.2025.2562522 ↗
13. Wu Y, Lan J, Yang F, et al. Study of the high heating efficiency and uniformity by multi-port sweep frequency microwave irradiations. J Microw Power Electromagn Energy 2021; 55(4): 316–332.
14. 10.1016/j.csite.2024.10405210.1016/j.csite.2024.104052 ↗
15. 10.1002/mmce.2219010.1002/mmce.22190 ↗
16. Zhu KQ. Design and experiment of microwave heating equipment [Master’s thesis]. Chengdu, China: University of Electronic Science and Technology of China, 2018.
17. Yi ZK, Cheng YD, Jin YZ Numerical simulation model of microwave heating considering frequency fluctuation. J Microw 2020; 36(5): 92–98.
18. Lian C, Liu Y, Hu K, et al. Research on the influence of rotary frequency - conversion heating technology on microwave heating uniformity. Vacuum Electronics 2022; 4: 56–59.
19. 10.1109/LMWC.2017.269084910.1109/LMWC.2017.2690849 ↗
20. 10.1061/(ASCE)MT.1943-5533.000277110.1061/(ASCE)MT.1943-5533.0002771 ↗
21. 10.1088/1742-6596/1920/1/01203210.1088/1742-6596/1920/1/012032 ↗
22. 10.1016/j.applthermaleng.2018.05.12210.1016/j.applthermaleng.2018.05.122 ↗
23. 10.1088/1757-899X/297/1/01203710.1088/1757-899X/297/1/012037 ↗
24. 10.1016/j.ijheatmasstransfer.2019.06.01710.1016/j.ijheatmasstransfer.2019.06.017 ↗
25. 10.1016/j.seta.2021.10158110.1016/j.seta.2021.101581 ↗
26. 10.1016/j.cep.2022.10879610.1016/j.cep.2022.108796 ↗
27. 10.1016/j.apenergy.2020.11630010.1016/j.apenergy.2020.116300 ↗
28. Cui J, Yu Y, Song YZ, et al. Research on the influence of electromagnetic loss medium on the resonant frequency and quality factor of the TM0 mode in the resonant cavity. Journal of North China University of Technology 2024; 36(3): 67–74.
29. 10.3390/ma905030910.3390/ma9050309 ↗
30. 10.3390/ma1424776910.3390/ma14247769 ↗
31. 10.3390/ma1423736210.3390/ma14237362 ↗
32. 10.1109/TMTT.2023.324169110.1109/TMTT.2023.3241691 ↗
33. 10.1016/j.csite.2024.10491910.1016/j.csite.2024.104919 ↗
34. 10.1016/j.ces.2021.11668110.1016/j.ces.2021.116681 ↗
35. Zhao P. Research on broad - band ridge - waveguide passive devices. Chengdu, China: University of Electronic Science and Technology of China, 2020.
36. 10.1016/j.ifset.2021.10276710.1016/j.ifset.2021.102767 ↗