Multifunctional enhancement of polypropylene composite films via surface-modified palygorskite reinforcement
Source abstract
Abstract
In this work, the effect of surface modification of palygorskite (Pal) on its dispersion and on the morphological, thermal, wettability, mechanical, optical, and gas transport properties of blown polypropylene (PP)/Pal films was investigated. PP/PPma/Pal composites containing 1 wt% modified Pal were prepared via twin-screw extrusion, followed by blown film processing. The results demonstrated that surface modification significantly improved filler dispersion within the polymer matrix, leading to a reduction of approximately 15% in crystallinity, as confirmed by SEM and XRD analyses respectively. In addition, the films exhibited enhanced thermal stability, with an increase of ∼25% in the onset degradation temperature, and improved wettability, while maintaining mechanical performance. The films showed high transparency (>91%) and reduced haze (32–37%), attributed to changes in crystallinity that increased the amorphous fraction and improved optical clarity. Notably, in contrast to the typical barrier effect reported for layered clays, the incorporation of fibrous Pal led to a substantial increase in gas permeability, with O 2 and CO 2 permeability rising by 190% and 220%, respectively. This behavior is attributed to reduced polymer chain packing and the presence of polar functional groups introduced during surface modification. These findings demonstrate a novel strategy for tuning gas transport properties in polymer films and highlight their potential for agricultural applications, particularly as greenhouse covering materials where enhanced gas exchange can promote plant growth and productivity.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Polymer Nanocomposites and Properties · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Centro De Investigación Científica De Yucatán, A.C.
SECIHTI - Centro De Investigación En Química Aplicada
References (41)
Show source-provided references
1. 10.3390/polym1423506210.3390/polym14235062 ↗
2. Sarkar DJ, Barman M, Bera T, et al. Agriculture: polymers in crop production mulch and fertilizer. In: Mishra M (ed). Chapter in encyclopedia of polymer applications. CRC Press, 2018, vol 3.
3. 10.1016/j.cej.2018.02.04010.1016/j.cej.2018.02.040 ↗
4. Moustafa H, El-Sayed SM, Youssef AM. Synergistic impact of cumin essential oil on enhancing of UV-blocking and antibacterial activity of biodegradable poly (butylene adipate-co-terephthalate)/clay platelets nanocomposites. J Thermoplast Compos Mater 2021; 36: 1–117. https://doi.org/10.1177/089270572198977
5. 10.17660/ActaHortic.2012.952.2510.17660/ActaHortic.2012.952.25 ↗
6. Khaliq M, Azman H, Aznizam B, et al. Effect of MMT content on the mechanical, oxygen barrier and thermal properties of rice husk/MMT hybrid filler filled low density polyethylene nanocomposite blown films. J Thermoplast Compos Mater 2015; 29: 7. https://doi.org/10.1177/0892705714554492
7. 10.1177/0892705723117642110.1177/08927057231176421 ↗
8. 10.1016/j.eurpolymj.2007.11.00210.1016/j.eurpolymj.2007.11.002 ↗
9. 10.1016/j.eurpolymj.2007.06.01410.1016/j.eurpolymj.2007.06.014 ↗
10. 10.1016/j.polymer.2004.03.07310.1016/j.polymer.2004.03.073 ↗
11. Sahoo K, Mohanty S, Nayak SK. Effect of nanoclay on the nucleation, crystallization and melting behaviour of polypropylene: a study on non-isothermal crystallization kinetics. J Thermoplast Compos Mater 2015; 29: 1–1572. https://doi.org/10.1177/0892705715569825
12. 10.1002/(SICI)1098-2329(199821)17:1<53::AID-ADV5>3.0.CO;2-H10.1002/(SICI)1098-2329(199821)17:1<53::AID-ADV5>3.0.CO;2-H ↗
13. 10.1002/polb.1015910.1002/polb.10159 ↗
14. Zaman H, Hun P, Khan PR, et al. Keun-byoung. polypropylene/clay nanocomposites: effect of compatibilizers on the morphology, mechanical properties and crystallization behaviors. J Thermoplast Compos Mater 2012; 23: 3. https://doi.org/10.1177/0892705712446017
15. 10.1016/j.jmst.2013.08.01410.1016/j.jmst.2013.08.014 ↗
16. 10.1016/j.colsurfa.2016.10.00210.1016/j.colsurfa.2016.10.002 ↗
17. 10.1155/2017/914358910.1155/2017/9143589 ↗
18. 10.1007/s00289-019-02904-x10.1007/s00289-019-02904-x ↗
19. Cai Y, Xue J, Polya DA. A fourier transform infrared spectroscopic of mgrich, Mg-poor and acid leached paligorskites. Spectrochim Acta 2017; 66, 282288. https://doi.org/10.1016/j.saa.2006.02.053. https://doi.org/10.1016/j.clay.2007.05.001
20. 10.1002/app.2010410.1002/app.20104 ↗
21. 10.1016/j.polymer.2006.03.03610.1016/j.polymer.2006.03.036 ↗
22. 10.3390/app1112553410.3390/app11125534 ↗
23. 10.1016/j.saa.2006.02.05310.1016/j.saa.2006.02.053 ↗
24. 10.1016/j.clay.2010.03.01110.1016/j.clay.2010.03.011 ↗
25. 10.1021/ac50059a01710.1021/ac50059a017 ↗
26. Downs RT, Hall-Wallace M. American mineralogist crystal structure database. Am Mineral 2003; 88: 247–250.
27. 10.1016/j.eurpolymj.2004.08.01110.1016/j.eurpolymj.2004.08.011 ↗
28. Abad M, Arribas J, Gómez M, et al. Análisis de la cristalización dinámica de polipropileno isotáctico en presencia de ácido pimélico. Rev.Iberoam.Polim 2005; 6(2): 93–110.
29. 10.1180/claymin.1996.031.4.0110.1180/claymin.1996.031.4.01 ↗
30. 10.1007/s11595-011-0278-110.1007/s11595-011-0278-1 ↗
31. 10.1002/app.2829410.1002/app.28294 ↗
32. 10.1016/S0376-7388(01)00444-610.1016/S0376-7388(01)00444-6 ↗
33. 10.1016/j.memsci.2005.12.06210.1016/j.memsci.2005.12.062 ↗
34. 10.1016/j.eurpolymj.2006.02.00110.1016/j.eurpolymj.2006.02.001 ↗
35. 10.1016/j.apsusc.2010.09.09610.1016/j.apsusc.2010.09.096 ↗
36. 10.1002/pc.2028410.1002/pc.20284 ↗
37. 10.1016/j.clay.2015.07.02210.1016/j.clay.2015.07.022 ↗
38. 10.1177/0021998325140310210.1177/00219983251403102 ↗
39. 10.1016/j.matdes.2006.09.01810.1016/j.matdes.2006.09.018 ↗
40. Pérez E, Carril U. Fotosíntesis: Aspectos básicos. Reduca (Biología). Serie Fisiologia Vegetal, Universidad Complutense de Madrid 2009; 2(3): 1–47.
41. Crispín-González A. Evaluación Agronómica de Películas Para Invernadero Formuladas Con Nanopartículas de Óxido de Zinc. Master's Thesis. Center for Research in Applied Chemistry (Mexico), 2010.