Effect of pristine and amine-functionalized MWCNTs on the mechanical properties of Nylon 6 nanocomposites containing reprocessed material
Source abstract
Abstract
Application of Reprocessed (RP) material has attracted attention of researchers and it leads to sustainable developments and circular economy. This research work aims to study the effect of varying loading content of multiwalled carbon nanotube (MWCNT) and Amine functionalized multiwalled carbon nanotube (Amine MWCNT) on key mechanical properties of nanocomposites containing reprocessed Nylon 6 like tensile strength, flexural strength, modulus, hardness, impact strength. Reprocessed or recycled material used in 15% and 20% with loading of nanofillers in 0.5%, 1%, 1.5% and 2% in virgin Nylon 6. Compounding for various batches was done through melt mixing in twin screw extruder and test samples were prepared on injection moulding machines as per ASTM standard. The results indicate that Amine MWCNT at 1.5% and 2% loading is having better results than that of MWCNT reinforced Nylon 6 nanocomposite. Tensile strength enhanced by 9.94 % and modulus by 8.55% with 2% of Amine MWCNT compared to corresponding unfilled blend (15% RP and 20% RP material) which is taken as the base line. Flexural strength was the highest recorded with an increment of 30.41% with 2% of Amine MWCNT. Impact strength dipped marginally in both the cases (MWCNT and Amine MWCNT) whereas hardness increased slightly. ANOVA analysis was done to confirm the statistical significance of the differences between pristine MWCNT and amine-functionalized MWCNT loadings across both the 15% and 20% reprocessed Nylon 6 series. Scanning Electron Microscopy reveals the dispersion of nano fillers in Nylon 6 matrix whereas FTIR spectrum confirmed the presence of amide linkages of polyamide material. These findings highlight the positive and promising impact of MWCNT and Amine MWCNT on Nylon 6 composite which contains reprocessed Nylon 6 material which offers a viable pathway to support material circularity and enables the partial replacement of virgin polymers without sacrificing critical mechanical properties.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer crystallization and properties · Polymer Nanocomposites and Properties · Carbon Nanotubes in Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Maharashtra Institute of Technology
Institute of Chemical Technology
References (37)
Show source-provided references
1. 10.1016/j.polymer.2006.04.02010.1016/j.polymer.2006.04.020 ↗
2. Das N, Parthasarathy S, Das DK, et al. Polymer nanocomposites and nanostructured polymers. Igi Global 2024: 213–240. https://doi.org/10.4018/979-8-3693-6326-3.ch010
3. Harito C, V Bavykin D, Yuliarto B, et al. Polymer nanocomposites having a high filler content: synthesis, structures, properties, and applications. Center for Open Science, 2019. https://doi.org/10.31227/osf.io/5zfpu
4. 10.24198/pjd.vol32no1.2390310.24198/pjd.vol32no1.23903 ↗
5. 10.1016/j.compositesb.2015.03.04910.1016/j.compositesb.2015.03.049 ↗
6. 10.1007/BF0269255310.1007/BF02692553 ↗
7. 10.1080/25740881.2024.233929510.1080/25740881.2024.2339295 ↗
8. Moore J, Folkinshteyn D, P Howell J. The potential for exchange-traded futures on recycled materials to improve recycling efficiency. Invest Manag Financ Innovat 2022; 19(3): 93–104. https://doi.org/10.21511/imfi.19(3).2022.09
9. Oladele Io BO, Okoro CJ, Adelani SO, et al. Current application of recycled waste plastics as a sustainable materials: a review on availability, processing and application. SAGE; 38(1): 2025. https://doi.org/10.1177/08927057241248040
10. Sengupta S. Engineering performance through geometry: a comparative analysis of swcnts vs. mwcnts 2025 [Online]. Available: https://jier.org
11. 10.1021/acsnano.3c0846710.1021/acsnano.3c08467 ↗
12. 10.3390/jcs303006410.3390/jcs3030064 ↗
13. 10.1088/1757-899X/346/1/01200510.1088/1757-899X/346/1/012005 ↗
14. 10.1177/095400831664584810.1177/0954008316645848 ↗
15. 10.3390/nano1110262510.3390/nano11102625 ↗
16. Tonsi G, Maesani C, Alini S, et al. “Nylon Recycling Processes: a Brief Overview”. Chemical Engineering Transactions. 2023; 100: 727–732. https://doi.org/10.3303/CET23100122
17. Gama N, Araújo J, Godinho B, et al. Solvolysis of nylon: a pathway to sustainable recycling and circular economy. Sustain Times 2024; 16(22): 9725. https://doi.org/10.3390/su16229725
18. 10.1177/002199831348477910.1177/0021998313484779 ↗
19. 10.1088/1755-1315/1210/1/01201610.1088/1755-1315/1210/1/012016 ↗
20. 10.1016/j.polymdegradstab.2006.02.00110.1016/j.polymdegradstab.2006.02.001 ↗
21. 10.24996/ijs.2020.61.9.910.24996/ijs.2020.61.9.9 ↗
22. 10.3390/polym1601004110.3390/polym16010041 ↗
23. 10.3390/polym504138010.3390/polym5041380 ↗
24. M AM KG A. “Fabrication and testing of nylon (PA) -6 polymer composite reinforced with graphene nano particles”. 2020; 7(1): 5–12.
25. 10.3390/coatings1207094710.3390/coatings12070947 ↗
26. 10.1016/j.polymertesting.2020.10699410.1016/j.polymertesting.2020.106994 ↗
27. 10.3390/polym1708103810.3390/polym17081038 ↗
28. 10.4028/www.scientific.net/AMR.287-290.46210.4028/www.scientific.net/AMR.287-290.462 ↗
29. 10.1021/ma049132t10.1021/ma049132t ↗
30. 10.1177/0892705721106769810.1177/08927057211067698 ↗
31. Khan ZI, Mohsin MEA, Habib U, et al. Enhanced mechanical and thermal performance of sustainable RPET/PA-11/joncryl ® nanocomposites reinforced with halloysite nanotubes. MDPI; 2025: 1–23.
32. 10.1002/app.4089310.1002/app.40893 ↗
33. Kumar R, As A, Pattanaik A. “Examination of electrical conductivity, thermal stability, tensile strength and elongation of PA6/CNT/Clay nanocomposite fabricated by 3D printing”. Journal of Thermoplastic Composite Materials (SAGE). 2026; 39(4): 2026. https://doi.org/10.1177/08927057251387537
34. Khan ZI, Mohamad ZB, Rahmat ARB, et al. A novel recycled polyethylene terephthalate/polyamide 11 (rPET/PA11) thermoplastic blend. Prog. Rubber Plast. Recycl. Technol. SAGE 2021; 1(12): 233–244. https://doi.org/10.1177/14777606211001074
35. Mohamed KU, Gabr H. Mechanical, thermal, and interfacial shear properties of polyamide/nanoclay nanocomposites: study the effect of nanoclay on the micromechanism of fracture: study the effect of nanoclay on the micromechanism of fracture Gabr MH. Uzawa K Abstract 2018; 31(4): 5692. https://doi.org/10.1177/0892705717705692
36. Khan Zi KA, Habib U, Mohamad ZB, et al. Innovative hybrid nanocomposites of recycled polyethylene terephthalate/polyamide 11 reinforced with sepiolite and graphene nanoplatelets. J Thermoplast Compos Mater 2025; 38(3): 64457. https://doi.org/10.1177/08927057241264457
37. 10.1016/j.rineng.2023.10173110.1016/j.rineng.2023.101731 ↗