Microscale equivalent modeling and experimental validation of CCF/PLA using a 100-to-1 downscaling strategy
Source abstract
Abstract
Multiscale simulation of Fused Deposition Modeling (FDM) of Continuous Carbon Fiber reinforced Polylactic Acid (CCF/PLA) is constrained by filament-level geometric complexity. A “100-to-1” downscaling strategy is developed in which a regular filament cluster is simplified through equal-area square surrogates, thereby preserving fiber volume fraction ( V f ) while substantially reducing geometric and computational burden. A Representative Volume Element (RVE) was implemented in analysis software using a regular rectangular array, Periodic Boundary Conditions (PBCs), and C3D6 wedge elements to evaluate effective engineering constants for three configurations (fully filled, gapped, and gap-free) across V f = 35%–95%. The axial modulus predictions agreed closely with the Tandon–Weng model, with deviations below 2%, and remained within the Hashin–Shtrikman admissible bounds. However, the transverse moduli were higher than the Tandon–Weng predictions, with deviations mainly ranging from approximately 9% to 24%, whereas the shear moduli showed weaker and component-dependent deviations. This tendency is attributable to corner-induced stress concentration in square inclusions, shared-node compatibility, and the kinematic constraints imposed by the regular array. Nevertheless, the results remained physically admissible and exhibited a conservative stiffness-estimation trend, especially in the transverse direction. Furthermore, tensile testing of a single-track specimen (measured V f ≈ 34%) supported the engineering utility of the proposed approach for predicting ultimate load (error ≈10%). The stiffness deviation between experiment and simulation (initial deviation ≈22%) was quantitatively interpreted by introducing a system-compliance correction mechanism, which partly reduced the apparent discrepancy and clarified the contribution of testing-system compliance. Overall, the proposed strategy retains accuracy for axial load-bearing behavior while providing an efficient and scalable microscale modeling basis for subsequent path- and structure-level simulations of FDM-printed CCF/PLA.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Composite Material Mechanics · Additive Manufacturing and 3D Printing Technologies · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
University of Science and Technology Liaoning
References (34)
Show source-provided references
1. 10.1016/j.jmrt.2022.11.05310.1016/j.jmrt.2022.11.053 ↗
2. 10.3390/polym1614196010.3390/polym16141960 ↗
3. 10.1016/j.compositesb.2022.11046310.1016/j.compositesb.2022.110463 ↗
4. 10.3390/polym1612162210.3390/polym16121622 ↗
5. 10.1021/acs.langmuir.4c0013910.1021/acs.langmuir.4c00139 ↗
6. 10.1177/0892705722108846810.1177/08927057221088468 ↗
7. 10.1177/0892705725134426510.1177/08927057251344265 ↗
8. 10.3390/polym1403042610.3390/polym14030426 ↗
9. 10.1177/0892705721102146210.1177/08927057211021462 ↗
10. 10.1177/0892705723117152410.1177/08927057231171524 ↗
11. Sayyidmousavi A, Fawaz Z. A micromechanical approach to the mechanical characterization of 3D-printed composites. Polym Polym Compos 2022; 30: 1–7. https://doi.org/10.1177/09673911221078481
12. 10.1177/0731684424126601210.1177/07316844241266012 ↗
13. 10.3390/polym1416342910.3390/polym14163429 ↗
14. 10.1016/j.compscitech.2024.11072310.1016/j.compscitech.2024.110723 ↗
15. 10.1007/s40964-025-01131-310.1007/s40964-025-01131-3 ↗
16. 10.3390/polym1618265610.3390/polym16182656 ↗
17. 10.1016/j.compositesa.2023.10745410.1016/j.compositesa.2023.107454 ↗
18. 10.1016/j.compositesb.2024.11208010.1016/j.compositesb.2024.112080 ↗
19. 10.1016/j.euromechsol.2020.10418110.1016/j.euromechsol.2020.104181 ↗
20. 10.1002/pc.2883110.1002/pc.28831 ↗
21. 10.1177/2634983322113229610.1177/26349833221132296 ↗
22. 10.1016/j.compositesb.2021.10867110.1016/j.compositesb.2021.108671 ↗
23. 10.1016/j.jmapro.2023.07.02710.1016/j.jmapro.2023.07.027 ↗
24. 10.1007/s11837-017-2609-y10.1007/s11837-017-2609-y ↗
25. 10.1016/0022-5096(63)90060-710.1016/0022-5096(63)90060-7 ↗
26. 10.3390/jcs302005610.3390/jcs3020056 ↗
27. 10.3390/app1112535410.3390/app11125354 ↗
28. 10.1016/j.addma.2022.10337110.1016/j.addma.2022.103371 ↗
29. 10.3390/ma1814339410.3390/ma18143394 ↗
30. 10.1016/j.compstruct.2025.11963110.1016/j.compstruct.2025.119631 ↗
31. 10.1007/s42452-021-04261-910.1007/s42452-021-04261-9 ↗
32. 10.3390/polym1320355510.3390/polym13203555 ↗
33. 10.1016/j.carbon.2019.11.05410.1016/j.carbon.2019.11.054 ↗
34. 10.1016/j.addr.2016.06.01210.1016/j.addr.2016.06.012 ↗