FDM process parameter optimization for mechanical performance of PLA/PLA-CF sandwich composites
Source abstract
Abstract
The mechanical reliability of high-performance polymer composite materials can be enhanced by optimizing the process parameters of Fused Deposition Modelling (FDM). A new lightweight polylactic acid (PLA) and carbon fibre-reinforced PLA (PLA-CF) sandwich structure is studied and optimized under the Taguchi L9 orthogonal array design to achieve the best tensile behaviour. The maximum ultimate tensile strength (σ UTS ) of 47.9 MPa, Young’s modulus ( E ) of 1526 MPa and elongation at break (Ɛ f ) of 5.19% was achieved with the optimal parameter combination of concentric infill pattern (Level 1), 0.1 mm layer height (Level 1) and 150 mm/s printing speed (Level 1). The concentric infill gave the best structural reliability (peak S/N ratio of 33.57 dB) using the signal-to-noise (S/N) ratio analysis. Analysis of Variance (ANOVA) showed that the infill pattern was the most significant factor, accounting for 36.1% of the variation in load-bearing capacity and 34.2% of stiffness. The results of the confirmation test confirmed the Taguchi regression model (R 2 = 94.74%, p = .029) and showed that it significantly enhances the mechanical performance compared to the baseline configuration. The fractography performed by the Quantitative Scanning Electron Microscopy (SEM) showed that both the printing speed and the internal porosity were increased, however, the energy-dissipative mechanisms, such as fibre pull-out (23.8 ± 12.4 µm), contributed to the preservation of structural integrity. The results provide a scalable approach for the production of affordable and defect-tolerant multi-material FDM composites that can be used for automotive and aerospace applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · biodegradable polymer synthesis and properties · Polymer Foaming and Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Thapar Institute of Engineering & Technology
Indian Institute of Information Technology, Design and Manufacturing
References (37)
Show source-provided references
1. Chouhan V, Raj Singh RK, Mudgal D. Enhanced mechanical performance of 3D-printed PLA and carbon-fiber reinforced PLA sandwich structures via Taguchi-based process optimization. J Sandw Struct Mater 2026; 372: 10996362261460208. https://doi.org/10.1177/10996362261460208
2. 10.1177/0021998326144459510.1177/00219983261444595 ↗
3. Butt J, Khan MAA, Adnan M, et al. Performance analysis of FFF-printed carbon fiber composites subjected to different annealing methods. J Manuf Mater Process 2024; 8: 252. https://doi.org/10.3390/jmmp8060252
4. 10.1016/j.jmapro.2024.04.06710.1016/j.jmapro.2024.04.067 ↗
5. 10.1016/j.rineng.2025.10621010.1016/j.rineng.2025.106210 ↗
6. 10.1007/s12008-023-01490-710.1007/s12008-023-01490-7 ↗
7. Chouhan V, Raj Singh RK, Mudgal D. Investigation of tensile properties of FDM-printed PLA-CF infill in PLA shell components. J Thermoplast Compos Mater 2026; 31: 08927057261421156. https://doi.org/10.1177/08927057261421156
8. Karadağ A, Ulkir O. Taguchi-based multi-parameter optimization and machine learning prediction of mechanical properties in FDM-Fabricated polymer composites. J Mater Eng Perform 2026; 4; 1–19. https://doi.org/10.1007/S11665-026-13650-3
9. 10.1002/pc.2882310.1002/pc.28823 ↗
10. 10.1088/2053-1591/adbdae10.1088/2053-1591/adbdae ↗
11. 10.1002/pat.7062010.1002/pat.70620 ↗
12. Ulkir O, Karadağ A. Sustainable additive manufacturing with FDM: Taguchi-based parameter optimization and AI-driven prediction of mechanical and environmental metrics. Journal of Thermoplastic Composite Materials 2026; 45: 08927057261415795. https://doi.org/10.1177/08927057261415795
13. 10.1007/s11665-024-10170-w10.1007/s11665-024-10170-w ↗
14. 10.1177/0892705723117079010.1177/08927057231170790 ↗
15. 10.3390/ma1510370610.3390/ma15103706 ↗
16. Chouhan V, Raj Singh RK, Mudgal D. Optimization of FDM printing parameters for high-speed fabrication of PLA-ABS Bi-layer laminate structures. J Thermoplast Compos Mater 2026; 5: 08927057261441528. https://doi.org/10.1177/08927057261441528
17. 10.1016/j.nxmate.2025.10064510.1016/j.nxmate.2025.100645 ↗
18. 10.1016/j.ast.2023.10827610.1016/j.ast.2023.108276 ↗
19. Dhouioui M Zghal W Hentati H Fraj BB Amar MB Haddar M. Physical evaluation of fdm-printed carbon fiber Reinforced PLA: mechanical strength moisture sensitivity And Porosity. rrp.nipne.ro. M Dhouioui W Zghal H Hentati B Fraj M Amar. https://rrp.nipne.ro/IP/AP848.pdf
20. 10.1089/3dp.2021.032110.1089/3dp.2021.0321 ↗
21. 10.1002/pc.2749810.1002/pc.27498 ↗
22. 10.1002/pc.7010710.1002/pc.70107 ↗
23. Vural E, Ulkir O, Aydın E, et al. Multi-criteria assessment of carbon fiber reinforced filaments: effect of infill pattern on mechanical, surface, and environmental metrics. Journal of Thermoplastic Composite Materials 2026; 8: 08927057261453895. https://doi.org/10.1177/08927057261453895
24. 10.1108/MMMS-02-2026-004710.1108/MMMS-02-2026-0047 ↗
25. Ali HB, Al Ibadi DJ, Dheaaldin H, et al. Experimental mechanical property investigation on PLA-CF specimens using fused filament fabrication technology. Engineering, technology and applied science research. Dr D. Pylarinos 2025; 15: 23995–24004. https://doi.org/10.48084/etasr.10111
26. 10.1002/pc.7045810.1002/pc.70458 ↗
27. 10.1016/j.jmapro.2025.02.00110.1016/j.jmapro.2025.02.001 ↗
28. 10.1080/25740881.2023.219079910.1080/25740881.2023.2190799 ↗
29. 10.3390/polym1423523010.3390/polym14235230 ↗
30. 10.1177/095440622097166710.1177/0954406220971667 ↗
31. 10.1002/pat.7062610.1002/pat.70626 ↗
32. 10.1007/s11665-025-10783-910.1007/s11665-025-10783-9 ↗
33. 10.1088/2631-6331/ac9e8910.1088/2631-6331/ac9e89 ↗
34. 10.1038/s41598-025-14350-z10.1038/s41598-025-14350-z ↗
35. Kannan KR, Mishra V, Veeman D, et al. Investigation of physico-mechanical and flammability performance of 3D printed functionally graded polyamide carbon fibre and glass fibre multi-material composites. Journal of Thermoplastic Composite Materials 2026; 78: 366–379. https://doi.org/10.1177/08927057261434198
36. 10.1002/pc.2899310.1002/pc.28993 ↗
37. 10.3390/app1405204610.3390/app14052046 ↗