journal article·2026-07-26

Influence of alkali-treated and bitumen emulsion-coated sisal fibres on the physical, mechanical, and durability performance of reinforced bricks and paver blocks

Subham Jena

Publisher page

Abstract

This study investigated the influence of untreated, alkali-treated and bitumen emulsion-coated sisal fibres on the physical, mechanical, and durability performance of compressed bricks and paver blocks. Fibre incorporation significantly improved the mechanical performance of both composites, with 0.5% fibre dosage providing the optimum overall performance. Compared with the corresponding untreated fibre composites, alkali-treated fibres enhanced the compressive strength by up to 9.8% for bricks and 8.2% for paver blocks, while the flexural strength increased by up to 15.4% and 13%, respectively. The combined alkali treatment and bitumen emulsion coating produced considerable improvements in compressive and flexural strengths of up to 7.1% and 11.6%, respectively. Surface modification of fibres significantly enhanced wetting–drying durability, with the combined treatment reducing mass loss by up to 50.6% for bricks and 53.1% for paver blocks after 12 wetting–drying cycles, while bitumen emulsion-coated specimens improved residual compressive strength by up to 33.7% and 24.0%, respectively. Overall, alkali treatment provided the greatest enhancement in mechanical properties, whereas the combined alkali treatment and bitumen emulsion coating delivered the most balanced improvement in strength and long-term durability, demonstrating the potential of surface-modified sisal fibres as sustainable reinforcement for masonry and pavement applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

National Institute of Technology, Rourkela

References (33)

Show source-provided references
1. 10.1016/j.compositesb.2014.12.03410.1016/j.compositesb.2014.12.034 ↗
2. 10.1016/j.conbuildmat.2021.12555210.1016/j.conbuildmat.2021.125552 ↗
3. 10.9734/jerr/2023/v25i11102010.9734/jerr/2023/v25i111020 ↗
4. 10.3390/su1512937410.3390/su15129374 ↗
5. 10.1007/s12517-023-11695-510.1007/s12517-023-11695-5 ↗
6. 10.3390/eng502004110.3390/eng5020041 ↗
7. 10.1016/j.rser.2024.11432310.1016/j.rser.2024.114323 ↗
8. 10.1016/j.conbuildmat.2024.13751410.1016/j.conbuildmat.2024.137514 ↗
9. Jena S, Khatri VN, Nainegali L, et al. Effect of chemical treatment on physical, mechanical, and morphological characteristics of sisal geotextile. J Text Inst 2023; 115(10): 1743–1759. https://doi.org/10.1080/00405000.2023.2263832
10. 10.1007/s12221-024-00590-910.1007/s12221-024-00590-9 ↗
11. 10.1007/s10924-019-01418-x10.1007/s10924-019-01418-x ↗
12. 10.1080/15440478.2019.169799510.1080/15440478.2019.1697995 ↗
13. Jena S. A study on the strength aspects of alkali-activated red mud-crusher dust-blended geopolymer. In: Indian Geotechnical Conference Singapore 2021 December Springer Nature Singapore. pp. 207–224. https://doi.org/10.1007/978-981-19-6727-6_1910.1007/978-981-19-6727-6_19 ↗
14. Akhundzada HV, Khankishiyeva R, Yardim MS, et al. Synthesis and characterization of novel bitumen additive based on waste oils for enhanced asphalt performance. J Thermoplast Compos Mater 2026: 08927057261415875. https://doi.org/10.1177/08927057261415875
15. Jena S Khatri VN Nainegali L. A study on tensile properties of emulsion-coated sisal geotextile. In: Proceedings of the Indian Geotechnical Conference 2022. https://doi.org/10.1007/978-981-97-2700-1_2510.1007/978-981-97-2700-1_25 ↗
16. 10.1080/10298436.2025.247361810.1080/10298436.2025.2473618 ↗
17. Jena S Khatri VN Nainegali L. September. Numerical study on bearing capacity estimation of circular footing on sand. In: Ground Improvement II: Proceedings of the Indian Geotechnical Conference. Springer Nature 2025b p. 91. https://doi.org/10.1007/978-981-96-7610-1_910.1007/978-981-96-7610-1_9 ↗
18. 10.1080/14680629.2025.248902710.1080/14680629.2025.2489027 ↗
19. 10.1016/j.compositesb.2012.04.07510.1016/j.compositesb.2012.04.075 ↗
20. 10.1016/j.ijbiomac.2019.07.13610.1016/j.ijbiomac.2019.07.136 ↗
21. 10.1080/15440478.2018.143942710.1080/15440478.2018.1439427 ↗
22. 10.1080/15440478.2019.168706310.1080/15440478.2019.1687063 ↗
23. 10.1080/15440478.2019.171128710.1080/15440478.2019.1711287 ↗
24. 10.1016/j.jmrt.2022.06.00210.1016/j.jmrt.2022.06.002 ↗
25. ASTM D6913/D6913M. Standard test methods for particle-size distribution (gradation) of soils using sieve analysis.
26. ASTM D7928. Standard test method for particle-size distribution (gradation) of fine-grained soils using sedimentation (hydrometer) analysis.
27. ASTM D4318. Standard test methods for liquid limit plastic limit and plasticity index of soils.
28. ASTM D854. Standard test methods for specific gravity of soil solids by the water displacement method.
29. ASTM D698. Standard test methods for laboratory compaction characteristics of soil using standard effort (standard proctor).
30. ASTM D 4254-16. Standard test methods for minimum index density and unit weight of soils and calculation of relative density. West Conshohocken: ASTM Int, 2016.
31. ASTM D3080/D3080M – Standard test method for direct shear test of soils under consolidated drained conditions.
32. ASTM C140/C140M-18a standard test methods for sampling and testing concrete masonry units and related unit.
33. 10.2495/ARC22012110.2495/ARC220121 ↗