journal article·2018-02Open access

Highly efficient deep‐blue fluorescent dopant for achieving low‐power OLED display satisfying BT.2020 chromaticity

Yusuke Takita, Kyoko Takeda, Naoaki Hashimoto, Shiho Nomura, Tsunenori Suzuki, Harue Nakashima, Shogo Uesaka, Satoshi Seo, Shunpei Yamazaki

Abstract

Abstract In this work, novel blue‐fluorescent dopants with a heteroaromatic ring skeleton instead of the conventional pyrene skeleton were investigated. Bottom‐emission organic light‐emitting diodes (OLEDs) fabricated using the novel blue‐fluorescent dopants in light‐emitting layers achieved better deep‐blue chromaticity than OLEDs based on a conventional pyrene‐based dopant, while maintaining both high external quantum efficiency (EQE) and comparable reliability. The attainment of deep‐blue chromaticity without losing high EQE was ascribed to the improvement of the efficiency of energy transfer from the host to the dopant. Furthermore, it was estimated that using this novel dopant in a top‐emission OLED panel that satisfies BT.2020 chromaticity enables the power consumption of the whole panel to be 24% lower than that of the panel with a conventional dopant.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Semiconductor Energy Laboratory Co., Ltd. 398 Hase Atsugi‐shi Kanagawa 243‐0036 Japan

References (29)

Show source-provided references
1. 10.1063/1.9879910.1063/1.98799 ↗
2. ITU‐R Recommendation BT.2020‐2 “Parameter values for ultra‐high definition television systems for production and international programme exchange ” (2015)
3. ITU‐R Recommendation BT.709‐5 “Parameter values for the HDTV standards for production and international programme exchange ” (2002)
4. 10.1016/j.orgel.2013.06.02910.1016/j.orgel.2013.06.029 ↗
5. 10.1002/adma.20140162110.1002/adma.201401621 ↗
6. 10.1002/sdtp.1078210.1002/sdtp.10782 ↗
7. 10.1002/adma.20090098310.1002/adma.200900983 ↗
8. 10.1038/nphoton.2014.1210.1038/nphoton.2014.12 ↗
9. 10.1002/adma.20150549110.1002/adma.201505491 ↗
10. 10.1063/1.281836210.1063/1.2818362 ↗
11. 10.1063/1.327340710.1063/1.3273407 ↗
12. 10.1889/JSID17.2.13710.1889/JSID17.2.137 ↗
13. 10.1002/sdtp.1065410.1002/sdtp.10654 ↗
14. 10.7567/JJAP.53.05210210.7567/JJAP.53.052102 ↗
15. Yamazaki S. · 2017 · 243
16. 10.1002/sdtp.1175010.1002/sdtp.11750 ↗
17. S.YamazakiandT.Tsutsui “supranote 15 ” 198–201.
18. Method for manufacturing display device
19. 10.1889/1.243367210.1889/1.2433672 ↗
20. 10.1889/1.350034410.1889/1.3500344 ↗
21. S.YamazakiandT.Tsutsui “supranote 15 ” 201–210.
22. 10.1016/j.orgel.2010.03.00210.1016/j.orgel.2010.03.002 ↗
23. 10.1063/1.477318810.1063/1.4773188 ↗
24. S.YamazakiandT.Tsutsui “supranote 15 ” 253–261.
25. 10.1002/andp.1948437010510.1002/andp.19484370105 ↗
26. S.YamazakiandT.Tsutsui “supranote 15 ” 210–214.
27. ITU‐R Recommendation BT.1700 “Characteristics of composite video signals for conventional analogue television systems ” (2004)
28. 10.1002/sdtp.1156210.1002/sdtp.11562 ↗
29. 10.1002/sdtp.1158210.1002/sdtp.11582 ↗