journal article·2003-06

Color error from an RGB‐stripe pixel structure

Masaru Kanazawa, Koichi Hamada, Fumio Okano

Publisher page

Abstract

Abstract— Most direct‐view color displays have a sub‐pixel structure similar to the RGB‐stripe structure. The video data for R and B are produced on the condition that they are reproduced at the same position as G but they are displayed on the screen with 1/3 of a pixel separation from the corresponding G pixel. This pixel structure thus entails a convergence error of 1/3 of a pixel. The modified s‐CIELAB method was applied to investigate color errors produced by the RGB‐stripe pixel structure. The results show that the pixel structure can degrade the image quality even for a viewing distance where the pixel structure is not visible because the color difference caused by the structure has a low‐frequency component and the human vision can detect it. The same method was applied to the convergence error and it was shown that the necessary convergence accuracy is around 1/4 of a pixel.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Color Science and Applications · Infrared Target Detection Methodologies · CCD and CMOS Imaging Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (7)

Show source-provided references
1. 10.1889/1.198512710.1889/1.1985127 ↗
2. M.Kanazawaet al “A proposal of modification for s‐CIELAB ”J SID10 No. 4 (2002).10.1889/1.1827895 ↗
3. T.Kuritaet al “A Luminance Signal Bandwidth Expansion Method for the NTSC System ”IEEE Trans Broadcasting36 No. 4 (1990).10.1109/11.64480 ↗
4. T.Kuritaet al “A Bandwidth Expansion Method of Chrominance Signals with Compatibility for NTSC Receivers ”SMPTE J(1992).10.5594/J02343 ↗
5. For example A.V.OppenheimandR.W.Schafer Digital Signal Processing(Prentice‐Hall 1975) Chapter 1.
6. 10.1889/1.183177510.1889/1.1831775 ↗
7. For example G.Sharma ed. Digital Color Imaging Handbook(CRC press 2003).