High‐speed low‐voltage driving of high‐Xe‐content PDPs with priming particles
Source abstract
Abstract
Abstract— Power savings, image‐quality improvement, and cost reduction are the major issues facing PDP development. High‐Xe‐content PDPs have attained improved luminous efficiency, but with sacrifices in higher switching and sustain voltages and slower discharge build‐up. By examining PDPs having 3.5%–30% Xe content, it was found that utilization of the space‐charge priming effect as well as wall‐charge accumulation are effective in obtaining a low operating voltage and a high switching speed. The improvements are enhanced for higher Xe pressures. By using space‐charge priming, the statistical time lag of the discharge triggering for the 30% Xe content is reduced significantly and becomes approximately equal to that of 3.5% Xe content. Once triggered, the formative time lag of the discharge becomes shorter and the space charge experiences diffusion/drift; hence, accumulation of the wall charge is faster for discharges with higher Xe contents. These indicate that the use of an erase addressing scheme, rather than a write addressing scheme, is preferable when driving high Xe‐content PDPs, because the erase addressing scheme provides the addressing operation with an abundant amount of priming particles. Also, the drive voltages are lower for the erase addressing scheme. In order to reduce the address voltage, it is effective to accumulate wall charges prior to addressing. It was found that there are limiting values for the charge accumulation, above which self‐erase discharges ignite and the wall charge is dissipated. The self‐erase discharge occurs at relatively low wall voltages when the Xe percentages becomes higher. The sustain pulse voltage can be reduced while keeping the luminous efficiency high by increasing the sustain pulse frequency. As the frequency is increased, a residual amount of space charge created by the preceding sustain pulse increases. Due to the priming effect of these space charge, the build‐up of the discharge current becomes faster, resulting in a lower voltage.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Semiconductor materials and devices · Thin-Film Transistor Technologies · Plasma Diagnostics and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. O.Toyoda T.Kosaka F.Namiki A.Tokai H.Inoue andK.Betsui “A high performance delta arrangement cell PDP with meander barrier ribs ”Proc IDW '99 599–602 (1999).
2. T.Komaki H.Taniguchi andK.Amemiya “High luminance AC‐PDPs with waffle‐structured barrier ribs ”Proc IDW '99 587–590 (1999).
3. L.F.Weber “Positive column ac plasma display ”Proc IDRC '03 119–124 (2003).
4. T.Yoshioka A.Miyakoshi A.Okigawa E.Mizobata andK.Toki “A high luminance and high luminous efficiency AC‐PDP using high Xe‐content gas mixtures ”Proc IDW '00 611–614 (2000).
5. 10.1889/1.182423910.1889/1.1824239 ↗
6. S.Mikoshiba “Dynamic false contours on PDPs: Fatal or curable? ”Proc IDW '96 251–254 (1996).
7. J.Kang W.K.Min S.C.Choi J.W.Song J.B.Park J.R.Lim andE.H.Yoo “Characteristics of in‐bus structure with high Xe mixture gases ”Proc IDW '03 993–996 (2003).
8. T.J.Kim H.S.Bae D.C.Jeong andK.W.Whang “High luminous efficiency ac PDP optimized for high Xe discharge gas ”Proc IDW '03 1017–1020 (2003).
9. 10.1088/0022-3727/37/8/01010.1088/0022-3727/37/8/010 ↗
10. 10.1889/1.182874910.1889/1.1828749 ↗
11. 10.1889/1.186709610.1889/1.1867096 ↗
12. 10.1889/1.181144310.1889/1.1811443 ↗
13. 10.1889/1.203623010.1889/1.2036230 ↗