Color reproduction with a various number of sub‐pixels
Source abstract
Abstract
Abstract Monochrome reflective‐type displays are widely used for portable reading applications such as electric papers because this type does not need a back light unit and can be used outdoors for a long time. Color reflective‐type displays without back light units are desired to expand the market further. The current color reproduction is based on three sub‐pixel red, green and blue (RGB) methods, and when used in reflective type, its luminance is reduced to a third of that of monochrome type. Adding a white sub‐pixel to the current method can improve the luminance, making the sub‐pixel number four. However, in the case of a high resolution display with a four‐sub‐pixel method, the pixel structure is complex, and the luminance improvement may be limited. Instead of increasing the sub‐pixel number, two sub‐pixel methods are investigated. These methods can improve luminance with limited color gamut. The performances are compared with those of other methods quantitatively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Color Science and Applications · Color perception and design
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
NHK Engineering System, Inc. 1‐10‐11 Kinuta Setagaya‐ku Tokyo 157‐8540 Japan
References (4)
Show source-provided references
1. M.Kanazawa “Color reproduction methods to obtain high luminance and wide gamut on reflective displays” IDW VHF1‐3 (2012) pp. 225–228.
2. R. W. G.Hunt: “The transmission of colour television signals” in The Reproduction of Colour pp. 341 John Wiley & Sons LTD Chichester (2004).
3. International Commission on Illumination (CIE) Technical Report CIE 15“Colorimetry third edition” (2004) pp. 18.
4. J. H.Kwon “RGB color patterning for AMOLED TVs” Information Display2013March/April Frontline Technology.10.1002/j.2637-496X.2013.tb00592.x ↗