journal article·2012-10Open access

Contacting electronics to fabric circuits with nonconductive adhesive bonding

Torsten Linz, Malte von Krshiwoblozki, Hans Walter, Philipp Foerster

Journal of the Textile Institute· Volume 103· Issue 10

Abstract

For over two decades, different types of fabric circuits have been developed. These are fabrics with integrated electric conductors. However, a technology for contacting electronics to these circuits in a simple and reliable manner was missing. This inhibited any greater commercial success of fabric circuits as a potential means to create electronics-in-textiles applications. This paper presents a novel contacting approach based on nonconductive adhesive bonding that is both simple and very versatile concerning the choice of fabric circuit and type of electronics to be contacted. Test vehicles with two different kinds of fabric circuits were developed and exposed to different kinds of textile-typical stress. The results show that this contacting approach is very reliable. Finally, two demonstrators were developed, to show the potential of this novel process.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Electrical Contact Performance and Analysis · Nanomaterials and Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Belly, M., Pirotte, F. & Catrysse, M. (2005). The development of intelligent textiles at centexbel.MST News, 2, S.44.
2. Bickerton M. · IEEE Eurowearable · 2003 · 67 · S.6710.1049/ic:20030149 ↗
3. Buechley, L. (2006, October).A Construction Kit for Electronic Textiles. Paper presented at the 10th IEEE International Symposium on Wearable Computers, Montreux, Switzerland.10.1109/ISWC.2006.286348 ↗
4. 10.1007/s00779-007-0181-010.1007/s00779-007-0181-0 ↗
5. 10.1177/00405175040740101110.1177/004051750407401011 ↗
6. Foerster, P., Linz, T., von Krshiwoblozki, M., Walter, H., Kallmayer, C. & Aschenbrenner, R. (2011, December).NCA Flip-Chip Bonding with Thermoplastic Elastomer Adhesives. Paper presented at the IEEE 13th Electronics Packaging Technology Conference (EPTC 2011), Singapore.
7. 10.3139/978344643359510.3139/9783446433595 ↗
9. International Organization for Standardization. (2000).ISO 6330:2000 – textiles – domestic washing and drying procedures for textile testing.
10. JEDEC Solid State Technology Association/Electronic Industry Association. (2005).JEDEC standard JESD22-A104-C temperature cycling.
11. JEDEC Solid State Technology Association/Electronic Industry Association. (1997).JEDEC standard JESD22-A101-B steady state tempertare humidity bias life test – test method A101-B.
12. Kallmayer, C., Pisarek, R., Neudeck, A., Cichos, S., Gimpel, S., Aschenbrenner, R. & Reichl, H. (2003, May).New Assembly Technologies for Textile Transponder Systems. Paper presented at the IEEE Electronic Components and Technology Conference, New Orleans.10.1109/ECTC.2003.1216432 ↗
13. Keil A. · 1984
14. Kim Y. · IEEE Transactions on Advanced Packaging · 2010 · 33 · S.196
15. Linz, T. (2011). Analysis of failure mechanisms of machine embroidered electrical contacts and solutions for improved reliability. Unpublished doctoral dissertation. Retrieved from Wettelijk depot (D/2011/10.500/57/ISBN 978-90-8578-453-1).
16. Linz, T., Simon, E. & Walter, H. (2010, September).Fundamental Analysis of Embroidered Contacts for Electronics in Textiles. Paper presented at the 3rd Electronic System-integration Technology Conference (ESTC), Berlin, Germany.10.1109/ESTC.2010.5642823 ↗
17. 10.1109/TCAPT.2005.84848410.1109/TCAPT.2005.848484 ↗
18. Liu J. · 1999
19. 10.1109/TADVP.2007.89863610.1109/TADVP.2007.898636 ↗
20. 10.1177/004051750708067910.1177/0040517507080679 ↗
21. Orth, M.A. (2001).Sculpted computational objects with smart and active computing materials. Unpublished doctoral dissertation. Retrieved from,http://www.ifmachines.com/tech_thesis.html.
22. 10.1109/TITB.2005.85451210.1109/TITB.2005.854512 ↗
23. Polytec PT GmbH. (2009).Epoxid- und Polyimid-Klebstoffe für die Hybridtechnik, Elektrotechnik und Optik[Epoxy adhesives and polyimide adhesives for hybrid technologies, electrical engineering and optics]. Waldbronn, Germany. Retrieved fromhttp://www.polytec-pt.de.
24. Schwarzl F.R. · 1990
25. Simon, E.P., Kallmayer, C., Aschenbrenner, R. & Lang, K.D. (2011, September).Novel Approach for Integrating Electronics into Textiles at Room Temperature Using a Force-fit Interconnection. Paper presented at the European Microelectronics Packaging Conference (EMPC), Brighton, UK.
26. Sipilä, A., Kaasjager, A., Rotsch, C. & Linz, T. (2007, June).Integrating sEMG Sensors to Textile Materials. Paper presented at AUTEX 2007, Tampere, Finland.
27. 10.1109/TCAPT.2005.84857210.1109/TCAPT.2005.848572 ↗
28. Walter, H., Dermitzaki, E., Shirangi, H., Wunderle, B., Hartmann, S. & Michel, B. (2009, April).Influence of Moisture on the Time and Temperature Dependent Properties of Polymer Systems. Paper presented at the 10th International Conference on Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-electronics and Micro-systems, EuroSimE 2009, Delft, The Netherlands.10.1109/ESIME.2009.4938469 ↗
29. Wunderle, B., Kallmayer, Ch., Walter, H., Braun, T., Michel, B. & Reichl, H. (2008, September).Reliability Modeling and Test for Flip-chip on Flex Substrates With Ag-filled Anisotropic Conductive Adhesive. Paper presented at the 2nd Electronics System Integration Technology Conference, Greenwich, UK.10.1109/ESTC.2008.4684361 ↗
30. Yim M.-J. · IEEE Transactions on Advanced Packaging · 1999 · 22 · S.16610.1109/6040.763188 ↗