journal article·2022-05-04

Development of hemp-blended cotton fabrics and analysis on handle behavior, low-stress mechanical and aesthetic properties

Meenakshi Ahirwar, B. K. Behera

Publisher page

Abstract

Cotton is the most popular natural fiber used in apparel industry world over. Although cotton is cultivated in approximately 2.4% of the world’s arable land, it accounts for 24% of the world’s insecticide market. Industrial hemp is considered as the most sustainable raw material as substitute of cotton in textile industry. However, there are several challenges associated with hemp processing as the fiber is coarse, stiff and it has comparatively poor spinnability particularly when 100% hemp is processed in ring spinning system. The purpose of this paper is to investigate the aesthetic and low-stress mechanical properties, and handle value of the plain woven hemp-blended cotton fabrics. The 16Ne and 30Ne linear density compact and ring yarns were produced and were used to manufacture plain woven suiting and shirting fabrics, respectively. Crease recovery angle, pilling, tear and tensile strength, and handle value of the fabrics were determined.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Textile materials and evaluations · Research in Cotton Cultivation · Tree Root and Stability Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Textile and Fiber Engineering, Indian Institute of Technology Delhi, New Delhi, India

References (22)

Show source-provided references
1. 10.1080/15440478.2019.169799110.1080/15440478.2019.1697991 ↗
2. Bachik, A. B. (2004). Subjective and objective evaluation of fabric handle characteristics. PhD diss., University of Leeds.
3. Bajzík V. · World Journal of Textile Engineering and Technology · 2016 · 2 · 1
4. Behera B. K. · Autex Research Journal · 2007 · 7 · 3310.1515/aut-2007-070104 ↗
5. Behera B. K. · Indian Journal of Fibre & Textile Research · 1994 · 19 · 168
6. 10.1016/j.ecolecon.2005.11.02710.1016/j.ecolecon.2005.11.027 ↗
7. 10.3390/su1109269110.3390/su11092691 ↗
8. 10.19044/esj.2017.v13n33p37810.19044/esj.2017.v13n33p378 ↗
9. 10.15376/biores.9.2.3642-365910.15376/biores.9.2.3642-3659 ↗
10. 10.1016/j.biortech.2006.11.05010.1016/j.biortech.2006.11.050 ↗
11. Kraenzel, D. G., T., Petry, B., Nelson, M. J., Anderson, D. & Mathern, R. T. (1998).Industrial hemp as an alternative crop in North Dakota(Agricultural Economic Report Number 402). http://www.industrialhemp.net/pdf/aer402.pdf
12. 10.4028/www.scientific.net/AMR.821-822.35510.4028/www.scientific.net/AMR.821-822.355 ↗
13. 10.1007/s12221-014-1985-y10.1007/s12221-014-1985-y ↗
14. Md. Tahir P. · Bioresources · 2011 · 6 · 526010.15376/biores.6.4.5260-5281 ↗
15. Mitsu M. · Journal of the Textile Machinery Society of Japan · 1996 · 42 · 23
16. Mwaikambo L. · African Journal of Science and Technology · 2006 · 7 · 121
17. 10.1016/j.biosystemseng.2014.12.01210.1016/j.biosystemseng.2014.12.012 ↗
18. Prasad, B., Dhar, M., Roy, S., Ramdasi, P., Yadav, K., Aivalli, G. & Gosh, S. (2012). Cotton market and sustainability in India.WWF Report, 9–15.
19. 10.1007/s12229-015-9157-310.1007/s12229-015-9157-3 ↗
20. Subramanian, S., Phalgumani, G. R., Manjunatha, B. R., Sitaram, M. S., Shringarpure, A. W. & Bhatt, I. G. (1983). Assessment of crease recovery values of textile fabrics by different instruments. Indian Journal of Fibre and Textile Research, 8(1), 16–22.
21. Zhang H. · International Journal of Simulation: Systems, Science and Technology · 2016 · 17 · 18.1
22. 10.1177/15589250140090020210.1177/155892501400900202 ↗