journal article·2020-06-02

A comparative study on performance characteristics of multicomponent core-spun yarns containing cotton/PET/elastane

Osman Babaarslan, Esin Sarıoğlu, Münevver Ertek Avcı

Publisher page

Abstract

This paper experimentally investigated the characteristics of different (filament and multicomponent) core-spun yarn type. Filament core-spun yarns comprised cotton covered drawn textured (DTY) polyester (PET) filaments with four different filament finenesses. Regarding the production of multicomponent (dual) core-spun yarns, both PET with four different filament finenesses and elastane with four levels of draft variable were fed simultaneously. Yarn samples were produced with modified ring spinning system at the same spinning conditions. As a control group, 100% cotton ring-spun yarn was also manufactured. Tensile properties, unevenness, imperfections and hairiness of yarn samples were determined. Also, fatigue characteristics of yarn samples were examined at two different loading of cycles. The results showed that filament fineness had a significant effect on all yarn properties being determined. Dynamic modulus and dynamic strain properties of yarns, filament fineness, elastane draft and number of cycle were found to be statistically significant at 0.05 level.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Textile materials and evaluations · Structural Analysis and Optimization · Mechanical Engineering and Vibrations Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Engineering, Department of Textile Engineering, Çukurova University, Adana, Turkey;

Faculty of Fine Arts, Department of Fashion and Textile Design, Gaziantep University, Gaziantep, Turkey;

Research and Development Center, Çalık Denim Textile Industry and Trade Inc., Malatya, Turkey

References (34)

Show source-provided references
1. 10.1177/00405175010710041510.1177/004051750107100415 ↗
2. 10.7216/13007599201522990210.7216/130075992015229902 ↗
3. 10.1002/app.3351310.1002/app.33513 ↗
4. Çelik P. · Electronic Journal of Textile Technologies · 2009 · 3 · 29
5. 10.1007/s12221-011-0268-010.1007/s12221-011-0268-0 ↗
6. Demirbaş, S. (2005).Comparison of different elastomeric fibre types the physical properties(MSc thesis). Süleyman Demirel University, Turkey.
7. 10.1533/joti.2005.012110.1533/joti.2005.0121 ↗
8. Dubinskaite K. · Material Science (Medziagotyra) · 2005 · 11 · 288
9. Erez E. · Journal of Textile and Apparel · 2014 · 24 · 195
10. 10.1080/00405000.2015.101631910.1080/00405000.2015.1016319 ↗
11. Ertekin M. · Journal of Textile and Apparel · 2015 · 25 · 104
12. 10.1177/004051750809991610.1177/0040517508099916 ↗
13. 10.1080/00405000.2011.58054210.1080/00405000.2011.580542 ↗
14. 10.1177/004051751769398210.1177/0040517517693982 ↗
15. 10.1080/0040500970865852510.1080/00405009708658525 ↗
16. 10.1533/joti.2005.019410.1533/joti.2005.0194 ↗
17. 10.5604/12303666.117209110.5604/12303666.1172091 ↗
18. 10.3923/jas.2007.2706.270910.3923/jas.2007.2706.2709 ↗
19. Militky J. · 2009 · 159
20. 10.1177/004051750809409310.1177/0040517508094093 ↗
21. Pramanik P. · Autex Research Journal · 2009 · 9 · 1410.1515/aut-2009-090103 ↗
22. 10.1080/00405000.2013.84804510.1080/00405000.2013.848045 ↗
23. 10.1177/152808370809106510.1177/1528083708091065 ↗
24. Sarıoğlu E. · Journal of Engineered Fibres and Fabrics · 2016 · 11 · 90
25. 10.1088/1757-899X/254/8/08201210.1088/1757-899X/254/8/082012 ↗
26. 10.1515/aut-2016-003610.1515/aut-2016-0036 ↗
27. 10.3923/jas.2002.690.69310.3923/jas.2002.690.693 ↗
28. 10.3923/jas.2002.324.32610.3923/jas.2002.324.326 ↗
29. 10.1177/15589250120070040610.1177/155892501200700406 ↗
30. 10.1177/00405175040740120210.1177/004051750407401202 ↗
31. 10.1177/00405175040740070910.1177/004051750407400709 ↗
32. 10.1080/00405000.2018.153454110.1080/00405000.2018.1534541 ↗
33. 10.35530/IT.069.05.148610.35530/IT.069.05.1486 ↗
34. Vuruskan D. · Journal of Textile and Apparel · 2011 · 21 · 22