Effects of cyclic loading on sand overlaying clay model of unpaved roads reinforced with untreated/treated coir geotextiles
Source abstract
Abstract
The current study examined the application potential of the untreated/treated woven/non-woven coir geotextile on unpaved roads. For this, untreated/treated coir geotextiles were positioned at the interface under the unsoaked/soaked condition, and laboratory cyclic load tests were done in a test tank for the sand layer overlying the clay layer. The results of the study showed that models reinforced with untreated/treated woven coir geotextiles are better than the models with untreated/treated non-woven coir geotextiles. Furthermore, in comparison to the soaked condition, models reinforced with untreated/treated woven and non-woven coir geotextiles show better improvement in plastic deformation in the unsoaked condition. When placed at the interface of the sand layer overlying clay, untreated/treated woven/non-woven coir geotextiles can reduce plastic deformation in unpaved roads, especially in situations where the rut depth is high, as the improvement in plastic deformation was realised up to larger deformation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Geotechnical Engineering and Soil Stabilization · Geotechnical Engineering and Underground Structures · Geotechnical Engineering and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
National Institute of Technology (NIT)
References (27)
Show source-provided references
1. ASTM D1883: 21. Standard test method for California bearing ratio (CBR) of laboratory-compacted soils.
2. ASTM D2487: 06. (2021). Standard practice for classification of soils for engineering purposes (unified soil classification System).
3. ASTM D698. (2012). Standard test methods for laboratory compaction characteristics of soil using standard effort.
4. ASTM D854: 02. (2002). Standard test methods for specific gravity of soil solids by water pycnometer.
5. 10.1080/1748602090349740710.1080/17486020903497407 ↗
6. Balan K. (1995). Studies on engineering behavior and uses of geotextiles with natural fibers [Unpublished Ph.D. Thesis submitted to Indian Institute of Technology Delhi (India].
7. 10.1016/0266-1144(89)90002-210.1016/0266-1144(89)90002-2 ↗
8. 10.1080/15440478.2011.60159710.1080/15440478.2011.601597 ↗
9. 10.1016/s0266-1144(01)00006-110.1016/s0266-1144(01)00006-1 ↗
10. 10.1177/089270570934456010.1177/0892705709344560 ↗
11. 10.1177/1528083722111416110.1177/15280837221114161 ↗
12. 10.1177/1528083722111884710.1177/15280837221118847 ↗
13. 10.1007/s42947-023-00369-w10.1007/s42947-023-00369-w ↗
14. 10.1007/s42947-023-00293-z10.1007/s42947-023-00293-z ↗
15. 10.1016/j.compositesa.2010.11.00210.1016/j.compositesa.2010.11.002 ↗
16. 10.1680/gein.4.010610.1680/gein.4.0106 ↗
17. 10.1007/bf0111196410.1007/bf01111964 ↗
18. Sheeba, K. P., Sobha, S., Santha, L. P., & Devi, D. R. (2000). Studies on the potential of coir reinforced structures. Journal of Scientific and Industrial Research, 59(8), 55–62.
19. 10.1680/gein.6.014010.1680/gein.6.0140 ↗
20. Tilak, V. B., Dutta, R. K., & Mohanty, B. (2014). Engineering properties of bentonite modifiedwith lime and gypsum. Jordon Journal of Civil Engineering, 8(2), 199–215.
21. 10.1080/15440478.201810.1080/15440478.2018 ↗
22. 10.1080/15440478.2018.150313210.1080/15440478.2018.1503132 ↗
23. 10.1080/15440478.2021.195213510.1080/15440478.2021.1952135 ↗
24. 10.1007/s40030-018-0348-x10.1007/s40030-018-0348-x ↗
25. 10.1080/15440478.2018.150313210.1080/15440478.2018.1503132 ↗
26. 10.1080/15440478.2022.210104110.1080/15440478.2022.2101041 ↗
27. 10.1080/15440478.2022.204114610.1080/15440478.2022.2041146 ↗