Electrospun polystyrene/asphaltene fiber for selective separation of oil from water surface
Source abstract
Abstract
To deal with the challenges of oil spills and their harms, fabricating superhydrophobic adsorbents with high sorption properties is a significant issue. For the first time, asphaltene was involved in polystyrene polymer using the electrospinning method to produce efficient fibers for oil adsorption from water. The polystyrene-asphaltene composite fibers showed a considerable increase in the porosity, surface area, water contact angle, and hydrophobic-lipophilic nature compared to polystyrene fibers. The maximum adsorption capacity of polystyrene-asphaltene fibers was 50–120% higher than that of polystyrene fibers. The oil adsorption on the composite sorbents was fast, and the steady state condition was reached in 22 min. The kinetic data fit the intraparticle kinetic model well, representing three stages of the adsorption process. Asphaltene, as a cost-effective, abundant component, induces unique properties in the polystyrene-asphaltene fibers and can be considered a proper choice for oil spill cleanup.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Electrohydrodynamics and Fluid Dynamics · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Chemical Engineering, Urmia University of Technology
Polymer Engineering Group, Faculty of Engineering, Urmia University
References (24)
Show source-provided references
1. Agrawala, M. (2001). Measurement and modeling of asphaltene association. University of Calgary.
2. 10.1016/j.jenvman.2012.05.02710.1016/j.jenvman.2012.05.027 ↗
3. 10.1016/j.compositesb.2018.12.09710.1016/j.compositesb.2018.12.097 ↗
4. 10.1088/1757-899X/195/1/01200510.1088/1757-899X/195/1/012005 ↗
5. Dubey, A. P., & Sharon, M. J. (2022). Polymer conjugated carbon nano fiber to enhance its application: A review. The American Journal of Applied Sciences, 4, 5–41.
6. 10.1016/j.fuel.2019.11664110.1016/j.fuel.2019.116641 ↗
7. 10.1016/j.marpolbul.2011.11.00210.1016/j.marpolbul.2011.11.002 ↗
8. Martek, I. (2022). International construction management: How the global industry reshapes the world. Routledge.
9. 10.1177/096739112097457710.1177/0967391120974577 ↗
10. 10.1177/15589250110060020110.1177/155892501100600201 ↗
11. 10.1016/j.seppur.2019.05.04110.1016/j.seppur.2019.05.041 ↗
12. Polka, M., Kukfisz, B., Wysocki, P., Polakovic, P., & Kvarcak, M. (2015). Efficiency analysis of the sorbents used to adsorb the vapors of petroleum products during rescue and firefighting actions. Przemysł Chemiczny, 94, 33–335.
13. 10.1021/ie990781g10.1021/ie990781g ↗
14. 10.1007/s42823-019-00086-010.1007/s42823-019-00086-0 ↗
15. 10.1002/masy.20140013310.1002/masy.201400133 ↗
16. 10.1080/10916466.2015.113695210.1080/10916466.2015.1136952 ↗
17. 10.1002/pc.2376610.1002/pc.23766 ↗
18. 10.1080/10916466.2018.144510510.1080/10916466.2018.1445105 ↗
19. 10.1016/j.molliq.2019.11225410.1016/j.molliq.2019.112254 ↗
20. 10.1016/j.matchemphys.2008.08.05310.1016/j.matchemphys.2008.08.053 ↗
21. 10.1016/j.mattod.2015.11.01010.1016/j.mattod.2015.11.010 ↗
22. 10.1016/j.cej.2016.12.01010.1016/j.cej.2016.12.010 ↗
23. Zhang, B., Matchinski, E. J., Chen, B., Ye, X., Jing, L., & Lee, K. (2019). World seas: An environmental evaluation. Elsevier.
24. 10.1021/es200234310.1021/es2002343 ↗