journal article·2025-10-03

Biodegradation of hemp woven geotextile in granular soil

Eren Bayrakcı, Eren Balaban, Yücel Güney, Mehmet İnanç Onur, Yekta Karaduman, Murat Erdem

The Journal of The Textile Institute· Volume 116· Issue 10
Publisher page

Abstract

Hemp production is increasing globally as sustainability gains importance. This study aims to develop environmentally friendly a new type of woven hemp geotextile and determine its biodegradability and service life for civil engineering applications. Soil burial tests which lasted one, four, and eight months were performed to deduce service life. Each time duration, three hemp geotextile samples, polypropylene (PP) based woven and nonwoven geotextiles were buried in the sand. The performance of hemp geotextile is compared with PP geotextiles after burial. Biodegradability was evaluated by weight loss, microscope photographs and tensile strength tests. Hemp geotextiles started to degrade after 8 months of burial time. The tensile strength of hemp geotextiles decreased as soil burial time increased. Hemp geotextiles become more brittle as their burial time increases. The biodegradability of samples is also determined from microscope photographs, which show partial biodegradation. PP geotextiles outperformed hemp geotextiles after soil burial.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Geotechnical Engineering and Soil Stabilization · Composting and Vermicomposting Techniques · Polymer-Based Agricultural Enhancements

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Vocational School of Transportation, Eskisehir Technical University

Department of Civil Engineering, Faculty of Engineering, Eskişehir Technical University

Open Education Faculty, Anadolu University

Department of Materials and Energy, Hemp Research Institute, Yozgat Bozok University

Department of Chemistry, Faculty of Science, Eskisehir Technical University

References (53)

Show source-provided references
1. 10.1080/15440478.2020.186329710.1080/15440478.2020.1863297 ↗
2. 10.14502/Tekstilec2014.57.118–13210.14502/Tekstilec2014.57.118–132 ↗
3. Ashby, M. (2013). Materials and the environment (2nd ed.). Elsevier.
4. ASTM D698-12. (2021). Standard test methods for laboratory compaction characteristics of soil using standard effort (12,400 ft-lbf/ft3 (600 kN-m/m3)). ASTM International.
5. ASTM D854-14. (2016). Standard test methods for specific gravity of soil solids by water pycnometer. ASTM International.
6. ASTM D2487-11. (2020). Standard practice for classification of soils for engineering purposes (unified soil classification system). ASTM International.
7. ASTM D4253-16. (2019). Standard test methods for maximum ındex density and unit weight of soils using a vibratory table. ASTM International.
8. ASTM D4254-16. (2016). Standard test methods for minimum ındex density and unit weight of soils and calculation of relative density. ASTM International.
9. ASTM D6913-17. (2017). Standard test methods for particle-size distribution (gradation) of soils using sieve analysis. ASTM International.
10. ASTM D7928-21e1. (2021). Standard test method for particle-size distribution (gradation) of fine-grained soils using the sedimentation (hydrometer) analysis. ASTM International.
11. 10.1016/j.geotexmem.2009.03.00410.1016/j.geotexmem.2009.03.004 ↗
12. Benek M. B. (2006). A review on geotextiles and application examples [Master’s thesis]. Celal Bayar University.
13. 10.1128/AEM.01071-1210.1128/AEM.01071-12 ↗
14. 10.1007/s41062-020-00441-510.1007/s41062-020-00441-5 ↗
15. Demirbek, D., & Bulut, M. O. (2021). Production, characteristics and composite application areas of hemp fibers. Bartın University International Journal of Natural and Applied Sciences, 4(2), 176–191.
16. 10.30919/esg110110.30919/esg1101 ↗
17. Devrim G. (2019). Investigation of usage and biodegradability performance of fabrics produced by different raw materials [Master’s thesis]. Dokuz Eylül University.
18. 10.1890/05-183910.1890/05-1839 ↗
19. Gedik, G., Avinç, O. O., & Yavaş, A. (2010). Hemp fiber properties and ıts advantages in textile ındustry. Electronic Journal of Textile Technologies, 4(3), 39–48.
20. 10.1007/s40034-014-0036-y10.1007/s40034-014-0036-y ↗
21. Gizlenci, Ş., Acar, M., Yiğen, Ç., & Aytaç, Ş. (2019). Hemp farming. Publications of the Black Sea Agricultural Research Institute.
22. Gregoire, M., Bar, M., De Luycker, E., Musio, S., Amaducci, S., Gabrion, X., Placet, V., & Ouagne, P. (2021). Comparing flax and hemp fibres yield and mechanical properties after scutching/hackling processing. Industrial Corps & Products, 72.
23. Gregoire, M., Barthod-Malat, B., Labonne, L., Evon, P., De Luycker, E., & Ouagne, P. (2020). Investigation of the potential of hemp fibre straws harvested using a combine machine for the production of technical load-bearing textiles. Industrial Corps & Products, 145.
24. 10.1007/s00170-023-12549-w10.1007/s00170-023-12549-w ↗
25. 10.1177/1528083722111416110.1177/15280837221114161 ↗
26. 10.1080/00405000.2023.226383210.1080/00405000.2023.2263832 ↗
27. 10.1080/15440478.2020.184870510.1080/15440478.2020.1848705 ↗
28. Karakaya E. (2021). Ecological pretreatment of hemp fibers [Master’s thesis]. Erciyes University.
29. 10.1007/s12517-017-3131-910.1007/s12517-017-3131-9 ↗
30. Mangut, M., & Karahan, N. (2011). Textile fibers (4th ed.). Ekin.
31. 10.1007/s40034-017-0093-010.1007/s40034-017-0093-0 ↗
32. 10.1002/3527600035.bpola01210.1002/3527600035.bpola012 ↗
33. 10.1016/j.matdes.2009.11.07010.1016/j.matdes.2009.11.070 ↗
34. 10.1061/(ASCE)GT.1943-5606.000188510.1061/(ASCE)GT.1943-5606.0001885 ↗
35. 10.15406/jteft.2017.01.0003410.15406/jteft.2017.01.00034 ↗
36. 10.1016/S0921-3449(02)00173-810.1016/S0921-3449(02)00173-8 ↗
37. 10.1038/ismej.2010.5810.1038/ismej.2010.58 ↗
38. Ryan, R. B., Barry, R. C., & Naresh, C. (2009). Design of mechanically stabilized earth walls and reinforced soil slopes—Volume I, FHWA-NHI-10-024, FHWA GEC 011—Volume I. Federal Highway Administration, U.S. Department of Transportation.
39. 10.1016/j.inv.2024.10002510.1016/j.inv.2024.100025 ↗
40. 10.1080/15440478.2020.180814610.1080/15440478.2020.1808146 ↗
41. 10.1007/s10924-008-0103-x10.1007/s10924-008-0103-x ↗
42. Schmidt, W.-P., & Beyer, H.-M. (1998). Life cycle study on a natural fibre reinforced component. SAE Transactions, 107, 2095–2102. http://www.jstor.org/stable/44741160
43. 10.1177/002199831141362310.1177/0021998311413623 ↗
44. 10.1016/j.geotexmem.2018.07.00710.1016/j.geotexmem.2018.07.007 ↗
45. 10.1080/15440478.2019.162374910.1080/15440478.2019.1623749 ↗
46. TS EN ISO 9863-1. (2020). Geosynthetics—Determination of thickness at specified pressures—Part 1: Single layers. TSE.
47. TS EN ISO 9864. (2005). Geosynthetics—Test method for the determination of mass per unit area of geotextiles and geotextile- related products. TSE.
48. TS EN ISO 10319. (2015). Geosynthetics—Wide-width tensile test. TSE.
49. TS EN ISO 11721-1. (2002). Textiles—Determination of the resistance of cellulose-containing textiles to micro-organisms—Soil burial test—Part 1: Assessment of rot-retardant finishing. TSE.
50. TS EN ISO 12236. (2007). Geosynthetics—Static puncture test (CBR test). TSE.
51. TS EN ISO 13433. (2008). Geosynthetics—Dynamic perforation test (cone drop test). TSE.
52. 10.1080/15440478.2020.183962210.1080/15440478.2020.1839622 ↗
53. 10.1002/(SICI)1522-9505(19991201)272:1<121::AID-APMC121>3.0.CO;2-T10.1002/(SICI)1522-9505(19991201)272:1<121::AID-APMC121>3.0.CO;2-T ↗