Effects of slip additive and filament fineness on performance of machine-made carpets produced with polypropylene BCF pile yarn
Source abstract
Abstract
Polypropylene, due to its good mechanical properties and low cost, is one of the most preferred polymers in bulked continuous filament (BCF) yarn technology for the usage as pile yarn on machine-made carpets. This study aims to investigate the effects of different filament fineness and also blending polypropylene with slip additive, on the compressibility and appearance retention performances of carpets. With this purpose, eight carpet specimens were produced from BCF polypropylene yarns with two filament fineness (3.7 and 9.5 dpf) and four slip additive percentages (0 wt%, 0.5 wt%, 1 wt%, and 2 wt%). In order to examine the effects of different filament fineness and slip additive proportions; compression/recovery, dynamic loading and tetrapod appearance retention tests were applied to the samples and the results were analyzed statistically. Experimental results indicated that both filament fineness and slip additive percentage have a considerable effect on the mechanical responses of carpets. Coarser filaments performed better resilience, lower thickness loss, and higher appearance retention compared to finer filaments. In addition, an increased percentage of slip additive has also resulted in higher resilience after the compression/recovery test. However, on dynamic loading and tetrapod appearance retention test, a significant correlation is not observed with regard to slip additive percentage.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Textile materials and evaluations · Mechanical Engineering and Vibrations Research · Ergonomics and Musculoskeletal Disorders
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Naci Topçuoglu Vocational School, Gaziantep University
References (22)
Show source-provided references
1. Avient. (2023). CESA™ Slip Additives Lubrication. https://www.avient.com/sites/default/files/2022-03/CESA%20Slip%20Product%20Selector%20Guide.pdf
2. 10.1080/00405000.2019.169482410.1080/00405000.2019.1694824 ↗
3. Bishop, C. A. (2015). Vacuum deposition onto webs, films and foils. Elsevier.
4. Crawshaw, G. H. (2002). Carpet manufacture. Woodhead Publishing Limited.
5. 10.1177/15589250170120010110.1177/155892501701200101 ↗
6. 10.1080/0040500080217024210.1080/00405000802170242 ↗
7. 10.1080/00405000.2012.68555810.1080/00405000.2012.685558 ↗
8. 10.1177/1528083722113051610.1177/15280837221130516 ↗
9. 10.1533/978085709393610.1533/9780857093936 ↗
10. Goswami, K. K. (2009). Advances in carpet manufacture. Woodhead Publishing Limited.
11. Höfer, R. (2012). Polymer Science: A Comprehensive Reference. Elsevier.
12. Koç, E., Çelik, N., & Tekin, M. (2005). An experimental study on thickness loss of wilton-type carpets produced with different pile materials after prolonged heavy static loading. Part-1: Characteristic parameters and carpet behaviour. Fibres & Textiles in Eastern Europe, 13, 56–62.
13. Korkmaz, Y., & Koçer, S. D. (2010). Polipropilen makine halısı üretim parametrelerinin halı performansına olan etkileri. Electronic Journal of Textile Technologies, 4(1), 48–58.
14. 10.1177/00405175010710061310.1177/004051750107100613 ↗
15. Özdil, N., Bozdoğan, F., Kayseri, G. Ö., & Mengüç, G. S. (2012). Compressibility and thickness recovery characteristics of carpets. Textile and Apparel, 22, 203–211.
16. Sözcü Ş. (2019). The production of BCF yarn and machine carpet from recycled polypropylene pellets. Gaziantep Türkiye: MSc Thesis Gaziantep University.
17. Tavanai, H., Morshed, M., Zarebini, M., & Rezve, A. S. (2005). A study of the nucleation effect of pigment dyes on the microstructure of mass dyed bulked continuous filament polypropylene. Iranian Polymer Journal, 14(3), 267–276.
18. Tavanai, H., Morshed, M., & Hosseini, S. M. (2003). Effect of on-line melt blending of polypropylene with polyamide 6 on the bulk and strength of the resulting BCF yarn. Iranian Polymer Journal, 12(5), 421–430.
19. Tolinski, M. (2015). Additives for polyolefins: Getting the most out of polypropylene, polyethylene and TPO. Elsevier Science & Technology Books.
20. Varshney, R. K., Kothari, V. K., & Dhamija, S. (2014). Influence of polyester fibre shape and size on the hairiness and some mechanical properties of yarns. Indian Journal of Fibre and Textile Research, 39, 24–32.
21. 10.32710/tekstilvekonfeksiyon.80763110.32710/tekstilvekonfeksiyon.807631 ↗
22. Zweifel, H., Maier, R. D., & Schiller, M. (2009). Plastics additives handbook. Hanser Publications.