journal article·2015-09

The effect of moisture and air gap on the thermal protective performance of fabric assemblies used by wildland firefighters

Hualing He, Zhi-Cai Yu, Guowen Song

Publisher page

Abstract

The thermal protection performance (TPP) provided by fabric assemblies used by wildland firefighters is greatly affected by both the moisture and the air gap trapped in multilayer fabrics. In this paper, the effect of moisture, coupled with air gap on TPP was analyzed under radiant heat exposures of 21 kW/m2. The air gap sizes from 0 to 5.2 mm were analyzed using an air gap height regulation device; the moisture content of the multilayer fabric combinations around 0–70% were obtained by spraying distilled water to simulate varying amounts of sweat absorption. The results obtained indicate that certain air gaps entrapped in multilayer fabric system have a positive effect on TPP for both dry and wet multilayer fabric combinations. However, obvious trend changes in thermal protection were observed among dry and wet configurations when the air gap was moved to different positions. For the wet configurations, the second-degree burn time increased as the air gap moved further from the heat source, which was contrary to burn time response under dry conditions. These findings suggest that the complicated reciprocal effect of air gap and moisture on thermal protection should be both considered in analyzing the TPP of fabric assemblies.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Textile materials and evaluations · Thermoregulation and physiological responses · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. 10.1177/004051750605394710.1177/0040517506053947 ↗
2. 10.1177/004051750708130910.1177/0040517507081309 ↗
3. Lawson L. K. · International Journal of Occupational Safety and Ergonomics · 2004 · 10 · 22710.1080/10803548.2004.11076610 ↗
4. 10.1177/07349041860040050210.1177/073490418600400502 ↗
5. 10.1002/(ISSN)1099-101810.1002/(ISSN)1099-1018 ↗
6. 10.1177/004051751243683010.1177/0040517512436830 ↗
7. 10.1177/004051750935879510.1177/0040517509358795 ↗
8. 10.1177/004051750935879610.1177/0040517509358796 ↗
9. Sawcyn, C. M. (2003).Heat transfer model of horizontal air gaps in bench top testing of thermal protective fabrics(Unpublished thesis). Saskatoon, Canada, University of Saskatchewan, 1–149.
10. 10.1177/004051750809341510.1177/0040517508093415 ↗
11. 10.1177/00405175840540100310.1177/004051758405401003 ↗
12. 10.1177/152808370706950610.1177/1528083707069506 ↗
13. 10.1177/004051751139894310.1177/0040517511398943 ↗
14. 10.1177/004051751038010810.1177/0040517510380108 ↗
15. 10.1520/STP14470S10.1520/STP14470S ↗
16. 10.1177/00405175980680110210.1177/004051759806801102 ↗
17. 10.1177/10423915990100010110.1177/104239159901000101 ↗
18. 10.1007/s12221-012-0647-110.1007/s12221-012-0647-1 ↗
19. 10.1177/073490410606235510.1177/0734904106062355 ↗