2—SOME THEORETICAL LIMITATIONS OF SLIVER AUTOLEVELLING SYSTEMS
Source abstract
Abstract
The limitations of sliver autolevellers are studied in terms of a linear model based on the perfect drafting of straight parallel fibres of equal length. The basic factors which limit their performance are the presence of ‘dead times’ in the control loops, and the impossibility of obtaining a direct measure of fibre-end density. This means that other related variables, such as thickness or drafting force, are used as approximations. Autolevellers are generally divided into two basic types, namely open-loop and closed-loop, depending on whether the error is measured before the back rollers or after the front rollers, respectively. The behaviour of each system is studied and compared in terms of response functions expressed with respect to wavelength on the output material. Results are computed for a few basic control actions and the values of the control parameters for optimum response are determined. A third type of autoleveller is identified in this paper as one in which the error is measured in between the drafting rollers. This has the effect of combining both open-loop and closed-loop systems. In the case of an error in thickness it is shown that this method gives results which compare favourably with either of the other two. An autoleveller based on the use of drafting force as the controlled variable is also shown to belong to this category and gives results which are significantly better at short wavelengths. For a sliver with variable fibre length it is shown that in general the fibre-length distribution function varies with position along the length of the sliver. For control purposes this variation is considered as an additional unknown variable, but is unfortunately not continuously measurable. This means that control action must be based on incomplete information and this, therefore, represents another contributory factor limiting control ability.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Fiber Optic Sensors · Semiconductor Lasers and Optical Devices · Advanced Photonic Communication Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.