Heat resistance investigation and mechanical properties of fabric coated with Al2O3 sol–gel
Source abstract
Abstract
The Inflatable Reentry and Descent Vehicle is a new kind of ballistic atmospheric entry vehicle which generates a piece of large aerodynamic drag area for deceleration when the resistance cone is deployed by gas-filling expansion. However, the aerothermal heating during planetary entry poses a significant challenge to a flexible fabric. In this paper, the para-aramid fabrics with three different sol–gel coatings (i.e. Al2O3 sol coating, supercritical drying Al2O3 aerogel coating, and atmospheric pressure drying Al2O3 xerogel coating) were proposed for heat resistance analysis and strength analysis. The thermal and mechanical properties of flexible fabric materials were conducted by infrared spectrum analysis, thermogravimetric analysis, scanning electron microscopy analysis, 50s ablation and uniaxial tension testing. All the results indicate that fabric coated with the supercritical drying Al2O3 aerogel possesses high heat resistance and nearly 100% residues strengthen.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aerogels and thermal insulation · Silicone and Siloxane Chemistry · Gas Dynamics and Kinetic Theory
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Science and Technology on Advanced Composites in Special Environment Laboratory, Harbin Institute of Technology, Harbin, P.R. China
Funding
The national natural science innovation group · 2014CAST Funding · National Key Laboratory Opening Funding
References (18)
Show source-provided references
1. 10.1080/0040500080246503010.1080/00405000802465030 ↗
2. 10.1016/j.compstruct.2014.10.01510.1016/j.compstruct.2014.10.015 ↗
3. 10.1002/app.v125.410.1002/app.v125.4 ↗
4. Coatta, D., Jurewicz, D., Tutt, B., Rivellini, T., Clark, I. (2013). Development and testing of an 8 meter isotensoid supersonic inflatable aerodynamic decelerator. Aerodynamic Decelerator Systems Technology Conferences, Daytona Beach, Florida, AIAA-2013-1328.
5. 10.2514/1.A3300110.2514/1.A33001 ↗
6. Gregg S. J. · 1982
7. 10.1111/ijag.2014.5.issue-310.1111/ijag.2014.5.issue-3 ↗
8. Hutchings, A. L., Braun, R. D., Masuyama, K. & Welch, J. V. (2009). Experimental determination of material properties for inflatable aeroshell structures. Aerodynamic Decelerator Systems Technology Conference and Seminar, Seattle, Washington, AIAA-2009-2949.10.2514/6.2009-2949 ↗
9. Lichodziejewski, L., Kelley, C., Tutt, B., Jurewicz, D., Brown, G., Gilles, B. Player, C. (2012). Design and testing of the inflatable aeroshell for the IRVE-3 flight experiment. 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, Hawaii, AIAA-2012-1515.10.2514/6.2012-1515 ↗
10. 10.1002/mame.20130026710.1002/mame.201300267 ↗
11. 10.1016/j.actaastro.2009.01.04810.1016/j.actaastro.2009.01.048 ↗
12. 10.1177/00405175030730050910.1177/004051750307300509 ↗
13. Wei J. · Journal of Astronautics · 2013 · 34 · 881
14. 10.1016/S0094-5765(02)00078-410.1016/S0094-5765(02)00078-4 ↗
15. 10.1002/pen.v55.610.1002/pen.v55.6 ↗
16. 10.2514/1.4091210.2514/1.40912 ↗
17. 10.1016/j.msea.2014.04.09910.1016/j.msea.2014.04.099 ↗
18. Zu G. · Journal of Functional Materials · 2011 · 42 · 151