journal article·2019-10-03

Analysis of the effect of traffic exposure on the recovery properties of cut pile carpet using analytical and viscoelastic modeling

Sahar Jafari, Mohammad Ghane

The Journal of The Textile Institute· Volume 110· Issue 10
Publisher page

Abstract

Viscoelastic models composing of different combination of spring and dashpot are usually used to explain the mechanical behavior of textile materials. In this work, a viscoelastic model was presented to analyze the effect of traffic exposure on the compression and recovery performance of the pile carpet. Wear test, performed by a Hexapod tumbling machine, was conducted to simulate the traffic exposure. Using a tensile tester, adjusted in compression mode, one cycle of compression–decompression was applied to the samples. The standard nonlinear model was presented to fit the experimental data. Best curve fitting based on the least square method was then used to fit the model to the experimental curve. Different attributions of compression were then analyzed and discussed. The results showed that the standard nonlinear model was fitted to the experimental curves with an acceptable coefficient of regression (R2). The district model parameters, i.e. the spring and dashpot constants, were both decreased as the wear cycles increased. At the higher level of wear cycles, the model parameters showed some increment. The initial compression modulus showed the same trend. This may be explained by the more compactness of the carpet at higher wear cycles. The decompression modulus, compression and the decompression work also decreased with the increase of wear cycles. However, no significant increase of the formers was observed at the higher wear cycles.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Textile materials and evaluations · Natural Fiber Reinforced Composites · Material Properties and Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Textile Engineering, Isfahan University of Technology, Isfahan, Iran

References (24)

Show source-provided references
1. 10.1177/004051750934381610.1177/0040517509343816 ↗
2. 10.1177/004051750809939310.1177/0040517508099393 ↗
3. Ferry, J. D. (1980). Viscoelastic properties of polymers (3rd ed. pp. 33–55). New York, NY: Wiley.
4. 10.1177/00405175930630050210.1177/004051759306300502 ↗
5. Gupta S. K. · Indian Journal of Fibre and Textile Research · 2017 · 42 · 399
6. 10.1007/s12221-016-6191-710.1007/s12221-016-6191-7 ↗
7. 10.1080/00405000.2017.129984010.1080/00405000.2017.1299840 ↗
8. 10.1016/S0167-6636(02)00176-X10.1016/S0167-6636(02)00176-X ↗
9. 10.1007/s12221-017-6691-010.1007/s12221-017-6691-0 ↗
10. 10.1115/1.400717610.1115/1.4007176 ↗
11. 10.1177/00405175780480071210.1177/004051757804800712 ↗
12. 10.1177/004051750934231510.1177/0040517509342315 ↗
13. 10.1002/(SICI)1097-4628(20000628)76:14<2062::AID-APP9>3.3.CO;2-K10.1002/(SICI)1097-4628(20000628)76:14<2062::AID-APP9>3.3.CO;2-K ↗
14. 10.1177/00405175990690050310.1177/004051759906900503 ↗
15. 10.1177/00405175010710061310.1177/004051750107100613 ↗
16. 10.1177/00405175910610070410.1177/004051759106100704 ↗
17. Urbelis V. · Material Science · 2005 · 11 · 162
18. 10.1177/00405175920620100510.1177/004051759206201005 ↗
19. 10.1080/0040500960865908210.1080/00405009608659082 ↗
20. 10.1177/00405175970670090610.1177/004051759706700906 ↗
21. Vuruşkan D. · Periodicals of Engineering and Natural Sciences · 2017 · 5 · 181
22. 10.1177/00405175900600110210.1177/004051759006001102 ↗
23. 10.1177/004051750707941110.1177/0040517507079411 ↗
24. Zurek W. · Journal of Achievements in Materials and Manufacturing Engineering · 2010 · 43 · 702