journal article·2009-10-13

Improving the stiffness of unidirectionally oriented weft-knitted structures for polymer matrix composite reinforcement

M. de Araujo, R. Fangueiro, F. Soutinho

Journal of the Textile Institute· Volume 100· Issue 8
Publisher page

Abstract

The use of weft-knitted structures in composite reinforcements is limited due to their poor mechanical properties. The tensile behaviour of weft-knitted fabrics is strongly restricted by its loop formation. When this type of structure is used as reinforcement, the mechanical properties of the composite material may be considerably hindered, as the resin may bear the initial load and fail before the load is transferred to the reinforcing fibres. However, weft-knitting is the most suitable technique for the production of 3D fabrics for complex shape composite reinforcements and so their stiffness must be improved. This paper reports on the progress that has been made to improving the modulus of elasticity of glass fibre fleece structures in the coursewise direction, in order to enable the production of tubular or flat preforms for composite materials with adequate stiffness.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Advanced machining processes and optimization · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. British Standards Institution. 1974. 4/102–4/106. Handbook no. 1110.1109/MSPEC.1974.6366493 ↗
2. Cebulla, H., Diestel, O. and Offermann, P. Modeling and production of fully fashioned biaxial weft knitted fabrics. Proceedings of TECNITEX 2001: 1st AUTEX Conference. June29–30, Povoa de Varzim, Portugal. Edited by: de Araujo, M. D.10.1515/aut-2002-020102 ↗
3. de Araujo, M. D., Fangueiro, R., Ciobanu, O., Hu, H. and Ciobanu, L. Weft-knitting fabric design for technical applications. Proceedings of 30th Textile Research Symposium at Mount Fuji. 30 July–1 August, Shizuoka, Japan. Edited by: Kawabata, S.
4. de Araujo M. D. · AUTEX Research Journal · 2003 · 3
5. de Araujo, M. D., Fangueiro, R. and Hu, H. The mechanical behaviour of weft-knitted fabrics for technical applications. Proceedings of 2004 International Textile Congress: Technical Textiles: World Market and Future Prospects. October18–20. Edited by: Naik, A. Tarrassa, Spain: UPC.
6. de Araujo M. D. · Melliand Textilberichte English · 1996 · 5 · E66
7. de Araujo, M. D., Hu, H. and Fangueiro, R. Improving the mechanical properties of composite materials reinforced by weft-knitted fabrics. Proceedings of Textile Technology Forum/ IFAI. October, NC, USA: Charlotte.
8. de Araujo, M. D., Soutinho, F. and Fangueiro, R. Improving the mechanical properties of directionally oriented weft knitted structures for advanced FRP. AUTEX 2007 Conference. June26–28, Tampere, Finland.
9. Hu H. · Melliand Textilberichte English · 1996 · 1 · E13
10. Krilov O. I. · Legka Promislovist · 1968 · 2 · 32
11. Marvin A. W. · 1970 · 40