journal article·2015-09-02

Determination of mineral content in polymelt nonwoven fabrics

Yurong Yan, Weihong Xu, Peter P. Tsai

Publisher page

Abstract

Minerals have been widely added to polyolefins during film- or fiber-manufacturing process to improve the processibility as well as to enhance the product properties such as thermal conductivity, surface roughness, fabric filtration efficiency, and fabric capacity of oil absorbency. Titanium dioxide has been traditionally added in PET fibers as a delustrant to reduce their transparency for some applications, e.g. clothing materials. Calcium carbonate has recently been added in polymelt – spunbond and meltblown – fibers to increase the fiber processibility and to improve the fiber properties and hence to achieve their final performance. It is crucial that the adding quantity should be controlled so the fabric strength will not be adversely reduced. Calcium carbonate is frequently over-added in polymelt fibers to take the advantage in business trading by weight. A method is essential to determine the mineral content in the polymeric materials. While trying to use the volume of the fabrics displaced by liquid to determine the density of fibers fails, we successfully used buoyant force of the fabrics in a liquid to precisely determine the volume of the fibers and to use it to calculate the mineral content in spunmelt PP fabrics. A gadget was designed to incorporate with a balance to form a density balance for this research. It was observed that only a single layer but not multiple layers of fabric is a key point to accurately determine its buoyancy in the liquid. Multiple layers contributed to a relaxation of the bending forces at the folding lines of the fabric, which attributed to an error in measuring the buoyancy of the fabric.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Textile materials and evaluations · Material Properties and Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (7)

Show source-provided references
1. ASTM D1505-03. (2003).Standard test method for density of plastics by the density-gradient technique. 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.
2. ASTM D3800-99. (Reapproved 2010).Standard test method for density of high-modulus fibers. 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, 1999.
3. Batiste J. L. H. · TAPPI Polymers, Laminations and Coatings, Conference proceedings · 2000 · 3 · 1069
4. Fox R. W. · 1985
5. MSDS. Calcium carbonate. IMERYS, 100 Mansell Court East, Suite 300; Roswell, GA 30076.
6. MSDS. Achieve polymers. 6936G1 PP, ExxonMobil Chemical Company, P.O. Box 3272, Houston, TX 77253-3272.
7. West R. C. · 2003