journal article·2026-05-04

New accurate measurement method for anisotropy fabric elastic modulus in a curved geometry

Tahmine Nasrollahi Nasrabad, Mohammad Amani Tehran, Mohammad Hosseini Varkiani

Publisher page

Abstract

Analyzing the anisotropic mechanical behavior of textiles presents inherent challenges, particularly in applications where fabrics are subjected to multidirectional stresses over curved geometries. This study introduces a novel method for characterizing a mechanical property of fabrics that accounts for these complex loading conditions. A custom experimental setup was developed involving a descending spherical indenter acting on a circularly constrained fabric sample, designed to replicate the stress distributions encountered in practical scenarios. Finite Element Method (FEM) modeling, combined with optimization techniques, was employed to determine an effective modulus that best fits the experimentally measured force response. This modulus serves as a directional tensile index under curved geometries. This method is applicable across a range of complex geometries. As expected, the estimated modulus varied with curvature radius, yielding values of 46.7 and 32.1 MPa for indenters with diameters of 4.8 and 2.54 cm, respectively. A comparative analysis with the equivalent modulus used in previous studies—defined as the positivistic average of uniaxial moduli—revealed significantly improved accuracy, with mean square errors of 5.08 and 67.4 for the proposed and conventional methods, respectively. These findings underscore the limitations of relying on uniaxial tensile strength measurements in various directions to predict fabric behavior under multidirectional, curved loading conditions. Instead, the fabric should be considered as an integrated structure, in which the interplay between mechanical anisotropy and geometric complexity plays a critical role.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Textile materials and evaluations · Optical measurement and interference techniques · Structural Analysis and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Textile Institute of Amirkabir university of technology

References (22)

Show source-provided references
1. 10.1177/15589250130080011010.1177/155892501300800110 ↗
2. 10.1177/073168441348150910.1177/0731684413481509 ↗
3. 10.1108/0955622061068523010.1108/09556220610685230 ↗
4. 10.1108/0955622061068522110.1108/09556220610685221 ↗
5. 10.1080/00405000.2016.118632810.1080/00405000.2016.1186328 ↗
6. 10.1177/00405175990690111110.1177/004051759906901111 ↗
7. 10.1177/004051751139894710.1177/0040517511398947 ↗
8. 10.1177/004051751143500310.1177/0040517511435003 ↗
9. 10.1080/00405000.2017.136557810.1080/00405000.2017.1365578 ↗
10. 10.1080/00405000.2019.161753410.1080/00405000.2019.1617534 ↗
11. 10.1177/152808371663280610.1177/1528083716632806 ↗
12. 10.1097/BCR.0b013e3181eebea010.1097/BCR.0b013e3181eebea0 ↗
13. Penava, Ž., Šimić Penava, D., & Knezić, Ž. (2014). Determination of the elastic constants of plain woven fabrics by a tensile test in various directions. Fibres & Textiles in Eastern Europe, 22(2), 57–63.
14. 10.1080/00405000.2019.170008410.1080/00405000.2019.1700084 ↗
15. 10.1080/00405000.2019.164958010.1080/00405000.2019.1649580 ↗
16. 10.1533/jotp.36.1.1.5947510.1533/jotp.36.1.1.59475 ↗
17. 10.1177/152808371663133110.1177/1528083716631331 ↗
18. 10.1080/00405000.2017.135445010.1080/00405000.2017.1354450 ↗
19. 10.1177/004051751772938910.1177/0040517517729389 ↗
20. 10.1080/00405000.2017.128241010.1080/00405000.2017.1282410 ↗
21. 10.1177/073168441245989810.1177/0731684412459898 ↗
22. 10.1177/004051750708343710.1177/0040517507083437 ↗