journal article·2026-06-03

Characterization of bending properties of ultra-fine metal fibers and evaluation of testing methods

Yingao Wang, Xin Zhang, Junjie Pan, Zhihao Li, Liandeng Zhang, Siyi Bi, Huiqi Shao, Jinhua Jiang, Nanliang Chen, Guangwei Shao

Publisher page

Abstract

Metal fibers, especially tungsten and molybdenum fibers, are key materials for deployable satellite antenna reflectors. As an important indicator for measuring knittability, systematic research on their bending properties is relatively scarce. In this study, six types of metal fibers (W@14, W/Au@14, Mo@17, Mo/Au@17, Mo@27, Mo/Au@27) with different materials (tungsten and molybdenum), different diameters, and with or without gold-plating were selected as research objects. Five methods, including theoretical calculation, axial compression-bending, pure horizontal bending, three-point bending, and ring-shaped method, were used to systematically research their bending performance. The results showed that the bending stiffness of the six fibers measured by the axial compression-bending method was 0.053, 0.056, 0.104, 0.109, 0.560, and 0.540 cN·mm2, respectively, and was relatively close to the theoretical calculation results. Correlation and applicability analysis indicated that theoretical calculation, axial compression-bending, and pure horizontal bending had good correlation (R2 > 0.97). Due to the friction between the fibers and the bearing rollers, the bending stiffness of the fibers measured by the three-point bending method was relatively high. The ring-shaped method could qualitatively characterize the flexibility of the fibers through the bending coefficient. This study established a multi-dimensional testing system of ‘theoretical calculation—empirical characterization—qualitative verification’, providing technical references for the standardized testing of the bending performance of ultra-fine metal fibers and theoretical support for the material selection and quality control of satellite antenna metal meshes.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Textile materials and evaluations · Mechanical Behavior of Composites · Material Properties and Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Textiles, Donghua University

Engineering Research Center of Technical Textiles, Ministry of Education, Donghua University

lnnovanion Center for Textile Science and Technology, Donghua Uniersity

References (24)

Show source-provided references
1. 10.1080/0040500830865836810.1080/00405008308658368 ↗
2. 10.1177/004051751454875310.1177/0040517514548753 ↗
3. 10.1134/S199542122470073410.1134/S1995421224700734 ↗
4. 10.1533/joti.2005.003210.1533/joti.2005.0032 ↗
5. Huang X. L. Ji F. Li R. Q. Wu G. L. & Fang Z. L. (2024). Double-end clamping three-bend method fiber material bending strength testing device and method (Patent 201910071597.1). in Chinese)
6. Ji, S. Y. (2013). Mechanics of materials (p. 167). Science Press. (in Chinese)
7. Li J. N. (2023). Preparation and properties of flexible warp-knitted metal mesh-based composite for electromagnetic interference shielding [Doctor thesis]. Donghua University. (in Chinese)
8. 10.1021/acsapm.2c0095510.1021/acsapm.2c00955 ↗
9. Li, J., Wang, R. S., Shi, Y. M., & Gu, J. M . (2006). Feasibility study of application of metal wire mesh filtration technology in cryogenic liquid purification. Cryogenics 37(3), 39–42.
10. 10.1177/0040517522111465510.1177/00405175221114655 ↗
11. 10.1080/1944702300866152910.1080/19447023008661529 ↗
12. 10.1177/004051751985877210.1177/0040517519858772 ↗
13. Shao G. W. (2014). Warp knitting technology and performance research of metal mesh for spacecraft deployable antenna reflector [PhD thesis]. Donghua University. (in Chinese)
14. Sun F. F. (2013). The evaluation on modified flax garment prickle and the main factor analysis [Master thesis]. Soochow University. (in Chinese)
15. 10.1177/0040517523120065210.1177/00405175231200652 ↗
16. 10.13475/j.fzxb.2018030690510.13475/j.fzxb.20180306905 ↗
17. Xu, X. H. (2006). Introduction to materials (p. 20). Higher Education Press. (in Chinese)
18. Yang P. (2022). The preparation and mechanical properties of flexible warp-knitted metal mesh [Master thesis]. Jiangnan University. (in Chinese)
19. Ying, F., Jia, W., Li, N., Jiang, J. H., & Chen, N. L. (2019). The study on the knitting property of ultrafine wire and mechanical properties of its warp knitting mesh fabric. Melliand China, 47(04), 29–30 + 32. 34. (in Chinese).
20. 10.1002/app.2389810.1002/app.23898 ↗
21. 10.1016/j.solmat.2025.11365410.1016/j.solmat.2025.113654 ↗
22. Zheng, S., Shao, G. W., Li, H., Li, J. N., Shao, H. Q., Jiang, J. H., & Chen, N. L. (2023). Analysis of the knitt ability of ultra-fine metal wires based on SPSS factor analysis. Journal of Donghua University (Natural Science), 49(01), 26–32.
23. 10.1177/00405175970670100310.1177/004051759706701003 ↗
24. 10.3390/ma1517586110.3390/ma15175861 ↗