Comparison of cotton fiber-to-fiber friction to fiber drafting measurements and relations to fiber quality and wax content
Source abstract
Abstract
Fiber-to-fiber friction, an essential characteristic of cotton processing efficiency, is commonly determined by measuring the static or dynamic fiber-to-fiber cohesion with a tensile tester or with a cohesion meter. This study examined how fiber cohesion from an Instron tester agrees with that from a Draftometer on draw slivers. Comparison of Instron fiber friction between two load cell tests revealed a strong and significant relationship, and there was a significant positive correlation between Instron fiber friction and high-volume instrument (HVI) upper-half mean length (UHML). Meanwhile, there existed significant relationships between Draftometer drafting force and four HVI qualities positively but one HVI quality negatively. Overall, Instron fiber friction from two load cells exhibited strong, positive, and significant correlations with Draftometer drafting force. Further, cotton surface wax from attenuated total reflection (ATR) Fourier transform infrared (ATR FT-IR) measurement was negative but insignificant related to both Instron fiber friction and Draftometer drafting force.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Textile materials and evaluations · Research in Cotton Cultivation · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Cotton Quality and Innovation Research Unit, Southern Regional Research Center (SRRC), Agricultural Research Service (ARS), United States Department of Agriculture (USDA)
Cotton Fiber Bioscience and Utilization Research Unit, Southern Regional Research Center (SRRC), Agricultural Research Service, United States Department of Agriculture
Texoligy LLC
Funding
USDA-ARS
References (34)
Show source-provided references
1. 10.1007/s10570-009-9366-110.1007/s10570-009-9366-1 ↗
2. ASTM D2612. (2011). Standard test method for fiber cohesion in sliver and top (static tests). ASTM International.
3. ASTM D4120. (2024). Standard test method for fiber cohesion in roving, sliver and top in dynamic tests. ASTM International.
4. 10.1366/00037020577478321410.1366/000370205774783214 ↗
5. 10.13031/2013.1656910.13031/2013.16569 ↗
6. 10.1366/00037020677899902110.1366/000370206778999021 ↗
7. 10.1177/00405175020720050510.1177/004051750207200505 ↗
8. El Mogahzy, Y. E. (2008). Friction and surface characteristics of cotton fibers. In B. S. Gupta (Ed.), Friction in textile materials (pp. 225–252). Woodhead Publishing Limited.10.1533/9781845694722.2.225 ↗
9. 10.1177/00405175930630080610.1177/004051759306300806 ↗
10. El Mogahzy, Y., Broughton, R., Jr, Guo, H., & Taylor, R. (1997). Cotton fiber friction: The unknown quality of cotton. Beltwide Cotton Conferences (National Cotton Council, Cordova, TN, USA) (pp. 545–553).
11. 10.1177/00405175980680110810.1177/004051759806801108 ↗
12. 10.14504/ajr.8.2.110.14504/ajr.8.2.1 ↗
13. 10.14504/ajr.6.1.310.14504/ajr.6.1.3 ↗
14. Gamble, G. R. (2004). Implications of surface chemistry on cotton fiber processing. Journal of Cotton Science, 8, 198–204.
15. Gamble, G. R. (2005). Cotton fiber chemical differences and their effect on friction behavior: A comparison of two crop years in the atmi/ars leading cultivars study. Journal of Cotton Science, 9, 56–64.
16. Gamble, G. R. (2006). The influence of surface electrolyte and moisture content on the frictional behavior of cotton fiber. Journal of Cotton Science, 10, 61–67.
17. 10.1177/00405175720420030910.1177/004051757204200309 ↗
18. 10.1177/00405175800500050110.1177/004051758005000501 ↗
19. 10.1016/j.triboint.2018.06.02910.1016/j.triboint.2018.06.029 ↗
20. 10.1533/9781845692483.1.310.1533/9781845692483.1.3 ↗
21. 10.1177/00405175770470110810.1177/004051757704701108 ↗
22. 10.1080/00405000.2010.52928410.1080/00405000.2010.529284 ↗
23. 10.1177/0040517522113709610.1177/00405175221137096 ↗
24. 10.1177/0040517524123539810.1177/00405175241235398 ↗
25. 10.56454/KLBL880710.56454/KLBL8807 ↗
26. 10.13031/2013.1565610.13031/2013.15656 ↗
27. McAlister, D. D., Foulk, J. A., & Harrison, R. E. (2003). Advanced fiber information system length measurement of cottons hand-sorted by length group. Journal of Cotton Science, 7, 217–223.
28. 10.56454/LAMM706110.56454/LAMM7061 ↗
29. 10.1057/jt.2009.510.1057/jt.2009.5 ↗
30. 10.1080/15440478.2025.247346710.1080/15440478.2025.2473467 ↗
31. 10.1016/j.indcrop.2025.12221110.1016/j.indcrop.2025.122211 ↗
32. 10.3390/fib301003010.3390/fib3010030 ↗
33. Subramaniam, V., Sreenivasan, K., & Pillay, K. P. R. (1981). Studies in fibre friction: Part I-Effect of friction on fibre properties and processing performance of Cotton. Indian Journal of Textile Research, 6, 9–15.
34. 10.1038/srep2540310.1038/srep25403 ↗