journal article·1990-05-01

Low resistivity indium–tin oxide transparent conductive films. II. Effect of sputtering voltage on electrical property of films

S. Ishibashi, Y. Higuchi, Y. Ota, K. Nakamura

Publisher page

Abstract

A low resistivity and high transmittance Sn doped In2O3 (ITO) film was formed on a glass substrate by dc magnetron sputtering and lower sputtering voltage gave a lower resistivity film. At a sputtering voltage of −250 V, the resistivity obtained was 5.0×10−4Ω cm for room temperature substrate, 2.0×10−4Ω cm for 160 °C substrate, 1.9×10−4Ω cm for 200 °C substrate, and 1.2×10−4Ω cm for 460 °C substrate. At a sputtering voltage of −80 V, the resistivity was 1.3×10−4Ω cm for 200 °C substrate. A measurement of Hall effect shows that the decreased resistivity by lower sputtering voltage is not caused by the Hall mobility but by an increased carrier concentration.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: ZnO doping and properties · Thin-Film Transistor Technologies · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute for Super Materials, ULVAC JAPAN, Ltd., 523 Yokota Sanbu Chiba, 289-12, Japan

References

Reference metadata was not supplied for this record.