journal article·2009-05-01

Influence of deposition pressure and pulsed dc sputtering on pumping properties of Ti–Zr–V nonevaporable getter films

O. B. Malyshev, R. Valizadeh, J. S. Colligon, A. Hannah, K. J. Middleman, S. Patel, V. M. Vishnyakov

Publisher page

Abstract

The performance of a UHV vessel can be improved with a new CERN technology nonevaporable getter (NEG) coating, which is already widely used for accelerator vacuum chambers. Better understanding of the processes involved in NEG film deposition, activation, and poisoning should allow optimization and engineering of the film properties, which are necessary for a particular application. Ti–Zr–V NEG films were created by magnetron sputtering from a single Ti–Zr–V target, and the NEG performance and morphology dependence on deposition pressure, sputtering conditions, and substrate surface roughness have been investigated. It was found that the average grain size of the Ti–Zr–V film was 5–6 nm and was broadly independent of the substrate material and deposition conditions. However, film topography and density were shown to depend very much on the substrate surface roughness and deposition conditions. Rough substrates, high working pressures, and the absence of ion bombardment produced open columnar structures, whereas smooth substrates, ion assistance, and low pressures produced much denser layers. X-ray photoelectron spectroscopy studies have shown that full regeneration occurred at 300 °C but film activation started at temperatures of as low as 160 °C. The CO sticking probability reaches its maximum after activation at 250 °C and is found to be up to 0.3 with a pumping capacity in the range of 0.8–1.2 ML. The samples activated at 160 °C have a reduced pumping speed and capacity by an order of magnitude.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Fusion materials and technologies · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

STFC Daresbury Laboratory ASTeC Vacuum Science Group, , Warrington WA4 4AD, United Kingdom

Manchester Metropolitan University Department of Chemistry, Manchester M1 5GD, United Kingdom

Manchester Metropolitan University Department of Chemistry, , Manchester, M1 5GD, United Kingdom

References (15)

Show source-provided references
1. 1998 · 200
2. Vacuum · 1998 · 50 · 5710.1016/S0042-207X(98)00017-7 ↗
3. J. Vac. Sci. Technol. A · 1988 · 6 · 252810.1116/1.575541 ↗
4. J. Vac. Sci. Technol. A · 1990 · 8 · 386410.1116/1.576460 ↗
5. Vacuum · 2004 · 73 · 13910.1016/j.vacuum.2003.12.022 ↗
6. Vacuum · 2001 · 60 · 27910.1016/S0042-207X(00)00389-4 ↗
7. 2000 · 2291
8. 2002 · 2577
9. 2008 · 3685
10. 2008 · 3696
11. Vacuum · 2004 · 73 · 21910.1016/j.vacuum.2003.12.019 ↗
12. Vacuum · 2001 · 60 · 6710.1016/S0042-207X(00)00247-5 ↗
13. Vacuum · 2004 · 75 · 15510.1016/j.vacuum.2004.01.080 ↗
14. J. Vac. Sci. Technol. A · 2009 · 27 · 32110.1116/1.3081969 ↗
15. Vacuum · 2009 · 83 · 97610.1016/j.vacuum.2008.11.008 ↗